Comparison Panasonic EW-1411 vs Panasonic EW-DJ40

The number of working nozzles that are standardly supplied with the device. Nowadays, options are quite common with both one and two or three nozzles in the kit; and in the most extensive sets, this number can be four or five or even more.

In many sets, several nozzles may have different purposes. For instance, an irrigator, in addition to its standard nozzle, might include orthodontic and periodontal nozzles. However, it's important to note that models with the same number of accessories in the kit can have different specific specializations. So, when making a choice, it's wise to consider not just the quantity but also the types of nozzles available. Additionally, there's an option where several identical interchangeable heads come with one handle. This configuration is particularly common in toothbrushes. It enables multiple individuals, such as family members, to use a single device, and such a set is usually more cost-effective than purchasing individual toothbrushes for each person.

Models of replacement heads supplied with the device.

This information is valuable for assessing the capabilities of a specific model and for sourcing additional, spare, or replacement nozzles, particularly for toothbrushes and dental centers that naturally use such devices (as indicated in "Type"). Firstly, it's advisable to replace the heads in these devices every 3-6 months, similar to regular toothbrushes. Secondly, if each user purchases their own nozzle while sharing a single handle, it's a cost-effective alternative to buying a separate brush for each individual, although it may be less convenient. Regardless, knowing the model of the interchangeable nozzle will save you time and effort when searching for compatible accessories.

Modes of operation supported by the device.

Toothbrushes nowadays offer a wide range of modes beyond the traditional daily cleaning (often referred to as "2D" mode). You can find toothbrushes with options like the advanced 3D mode, as well as programs for gentle and deep cleaning, polishing, whitening, gum massage and tongue cleaning. On the other hand, irrigators typically offer different modes in addition to the standard continuous water jet. These additional modes often include pulsation and spray options.

Here is a detailed description of the most popular options found in brushes:

— Daily cleaning (2D). The "2D" mode of operation in toothbrushes closely resembles the traditional manual toothbrush experience. In this mode, the bristles of the brush move in a single plane, and the exact movement pattern may vary depending on the cleaning technology used. The intensity of brushing is typically medium to high, making it suitable for individuals with relatively healthy and not overly sensitive teeth. The recommended daily brushing time is 2 minutes, with 30 seconds allocated to each quadrant of the mouth. These corresponding settings are usually available in the timer function, if the toothbrush is equipped...with one. While "2D" brushing is somewhat less effective than "3D" (as mentioned below), it's a feature that can even be found in more affordable toothbrush models.

— Daily cleaning (3D). This feature, available in brushes with reciprocating-rotating and reciprocating-sweeping technology, involves bristle pulsation in addition to the standard cleaning motion. The pulsating movement, which goes deep into the brush head and back, enables cleaning in three dimensions simultaneously. This greatly enhances efficiency compared to the 2D cleaning mentioned earlier. These bristles not only address the outer tooth surfaces but also reach the sides and interdental spaces to some extent (though it's not a complete replacement for dental floss). However, it's worth noting that this advanced functionality typically comes at a higher cost.

— Gentle cleaning. The gentle treatment program, typically used for sensitive teeth and gums prone to bleeding, is common in brushes with reciprocating-rotating and reciprocating-brushing technologies. In these brushes, the gentle mode often involves reducing the nozzle's rotation or vibration speed. In sonic and ultrasonic models, gentler treatment is achieved by reducing vibration intensity. Regardless of the technology, this mode aims to minimize discomfort during brushing and the risk of gum damage, even when using standard nozzles. For the gentlest effect, it's advisable to use this function with a nozzle designed for sensitive teeth.

— Deep cleaning. Most often, this name means cleaning with a standard intensity, but an increased duration — for example, 3 minutes instead of the usual 2 minutes (45 seconds for each quadrant of the mouth instead of the traditional 30 seconds). This mode allows you to effectively clean your teeth and remove dirt, for which normal daily brushing is not enough.

— Polishing. A mode for treating relatively clean teeth that do not require a full-length cleaning. Usually, polishing is carried out at a reduced frequency of vibrations (rotations) and takes noticeably less time than conventional processing (for example, 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for whitening tooth enamel and removing stains, especially from the front teeth, is often an extended version of the regular brushing mode. For example, in a whitening mode, the brush might operate normally for 2 minutes and then switch to increased intensity for 30 seconds. Specific details about this mode, including any contraindications (especially for individuals with sensitive teeth or gum issues), should be checked separately.

— Massage gums. Gum treatment can be offered either as a separate program or as an add-on to the regular brushing routine. In the latter case, it typically involves a standard 2-minute toothbrushing program followed by activating an additional mode. This function not only ensures effective cleaning but also contributes to gum strengthening. It can be beneficial for addressing issues like inflammation and bleeding gums, although consulting a dentist is advisable in such cases.

— Cleaning the tongue. A separate mode for tongue cleaning is available in many electric toothbrushes. Brushing the tongue with an electric toothbrush can often cause discomfort due to tickling, so this mode typically offers a brief cleaning session lasting about 20 seconds. If needed, you can perform multiple sessions. It's important to note that the presence of a tongue cleaning mode doesn't necessarily mean that a specialized nozzle for tongue cleaning is included in the kit (as discussed in the "Nozzles" section), although it's commonly included.

It should be noted that in some toothbrushes, the mode change is carried out due to “smart” nozzles: when such a nozzle is installed, the device recognizes it by the built-in chip and automatically switches to the appropriate programme.

In turn, in irrigators, the features of the main modes are as follows:

— Jet (monoflow). The classic, most popular working format: a constant jet with a constant pressure. Provides sufficient efficiency for most tasks for which irrigators are used, while being extremely simple to implement and can be provided even in the most inexpensive models.

— Pulsating. Water supply with variable pressure. This mode is especially effective for removing dirt from the interdental space, under braces and in other hard-to-reach places.

— Spray. In this mode, a mixture of water and air is fed through the nozzle, due to which, instead of the usual jet, a cloud of small droplets flying at high speed is obtained at the exit. This mode is great for massaging the gums and general cleaning of the mouth.

The pressure of the water supplied by the irrigator (see "Type") to the operating nozzle. Usually, this pressure can be adjusted within a certain range, since different situations and purposes require different processing intensity. The wider this range, the more versatile the device.

The lower limit of the pressure range in modern irrigators is around 30 kPa; similar values are set for procedures for sensitive teeth, for certain gum diseases and in other cases where the most gentle treatment is required. 400 – 500 kPa is considered an average level, and 600 – 650 kPa is considered high, such indicators allow for deep cleaning (see "Functions"). And higher values are rare, and they are used mainly when cleaning the tongue. However, it is best to consult with a dentist before purchasing an irrigator and choose a model for working pressure based on the recommendations received.

The volume of the reservoir for water (or treatment solution) provided in the design of the irrigator or flossing system (see "Type").

In general, the larger the tank, the less often you have to refill the device, but the larger, heavier and more expensive the whole structure is. Thus, in portable format irrigators, where the water tank is built right into the handle, the capacity is small — even in the largest models it usually does not exceed 400 ml, a larger tank would noticeably complicate use. However, even the smallest volumes in such cases are usually enough for at least one standard procedure. But stationary models, consisting of a handle and a separate main unit, can hold very significant volumes of water — up to 1.5 L or even more.

Additional items supplied with the device (in addition to the base and attachment set).

The most popular types of such items nowadays are charging stand, accessory stand, UV sanitizer and case ; Here is a more detailed description of each option:

— Charging stand. A battery charging device designed as a stand serves the dual purpose of recharging the battery and offering added convenience for storing the device. It's worth noting that this function can apply to dental centers, even if they primarily operate on mains power (as indicated in the "Type of power" section). In such cases, the toothbrush included with the dental center typically runs on batteries, and the charging stand is typically integrated directly into the main unit of the dental center for ease of use.

— Stand for accessories. A device designed to hold various accessories, primarily interchangeable nozzles, can come in different designs. For example, in toothbrushes and portable irrigators, this device is often integrated into a charging stand, which includes both a charging socket and open compartments for accessories. In irrigators and fixed-layout dental centers, these compartments are usually built into the main unit or the lid of the water tank. In this case, the compartments are typically covered with lids for hygiene reasons, making it...a more hygienic option. Regardless of the design, having a dedicated stand for accessories enhances the convenience of storing them.

— UV sanitizer. A device that uses ultraviolet (UV) radiation for disinfecting the device, particularly replaceable nozzles, is typically designed as a distinctive container. In some models, this container also serves as a cover or case. The disinfection process effectively eliminates the majority of pathogenic bacteria and viruses, all without the need for additional chemicals and ensuring safety as the radiation remains confined within the container. However, it's important to note that UV disinfection is not effective against regular dirt and debris, so having this function doesn't eliminate the need to clean the nozzle through washing.

— Case / cover. The device comes with a storage and carrying container, which can be either a hard case or a soft cover. Hard cases offer better protection, while soft covers are more compact and can be rolled up when not in use. Regardless, both of these accessories are highly convenient for storage and transportation. They safeguard the contents from dirt and damage, and in many cases, provide space to store additional accessories, reducing the risk of losing them. While you could use makeshift packaging for the same purpose, the provided container is typically more practical.

This refers to the maximum duration a device can run continuously when powered by a fully charged battery or fresh batteries. It's worth noting that this metric may also apply to models designed for mains power, such as flossing systems that include rechargeable toothbrushes, in which case we're referring to the battery life of these toothbrushes.

It's important to note that device specifications typically indicate the maximum runtime under ideal conditions, often in the most energy-efficient mode of operation (and for models with replaceable batteries, using high-quality batteries). The actual battery life can vary depending on specific usage conditions. However, this parameter still serves as a valuable basis for comparing different models. Generally, differences in the claimed operating time correspond proportionally to the real differences in battery life. For example, if one toothbrush has a stated operating time of 20 minutes and another boasts 40 minutes, in practice, their battery life (under similar conditions) will likely differ by approximately two times.

It's important to consider that, for toothbrushes, this parameter can help estimate the number of brushing sessions you can expect on a single charge. Typically, the recommended daily brushing duration is 2 minutes. So, if a toothbrush has an operating time of 30 minutes, it's sufficient for approximately 15 cleaning sessions (or more realistically, around 14 or 13).

The time required to charge the battery from zero to 100% in a device with the appropriate power type (see above). This parameter can vary from 1 – 3 hours in relatively simple and low-power devices to a day in advanced models with capacious batteries. At the same time, the longer the maximum operating time on a charge (see above), the longer, usually, the time required for charging, although there is no hard dependence here.

In general, having fast charging capabilities improves the convenience of a device by reducing interruptions in its operation. However, there is a trade-off to consider: fast charging often means either a smaller battery capacity or a higher price due to the use of specialized technologies to speed up the charging process. When evaluating this parameter, it's essential to think about how you intend to use the device. For instance, if a toothbrush or irrigator is solely used at home by one person and comes with a charging stand, fast charging may not be a critical factor. The device remains consistently charged as it's constantly on the charger, and its battery doesn't deplete significantly during one use. The time between sessions, usually around 8 to 12 hours, is more than enough to maintain a charged battery, even for devices with slower charging. However, if you plan to use the device while traveling, where access to power outlets is sporadic, it's preferable to have minima...l charging time to ensure you can recharge quickly during your trips.

General dimensions of the device. Most manufacturers report this data only for stationary devices — irrigators of the appropriate variety and dental centers (see "Type") — because it is believed that toothbrushes (even with stands) are not so large as to be inconvenient, and not so varied in size, to pay attention to this difference.

Note that the dimensions are usually given only for the main unit, without taking into account the tools installed on it; however, the size of these instruments, again, it is not large enough to cause serious inconvenience.