Comparison BlackVue DR750S-2CH vs BlackVue DR650S-2CH IR

A method of fixing the recorder on a device that plays the role of a mount - a bracket for the windshield, a helmet platform, a clamp for the steering wheel or another similar structure.

— Latch. One of the most popular options nowadays. The latch, along with the magnet (see below), refers to quick-release fasteners, allowing you to easily and quickly remove the device and return it to its place. This feature can be useful, for example, if the car is left overnight in an unguarded place, where an unremoved recorder can become a bait for thieves; In addition, the entire device sometimes has to be removed to view and copy footage. Specifically, latches are considered more reliable than magnets; they can be used even with the most massive devices, and are also cheaper to produce.

- Magnet. Another type of quick-release mount: a powerful permanent magnet that is strong enough to hold the recorder in place. This type of fastener is easier to use than a latch: to install it, just “stick” the device to the mount, and to remove it, just pull it hard. Another advantage is that the latch can be broken by unsuccessfully applying force, whereas in magnets there is practically nothing to break. On the other hand, this type of mount is less reliable: in the event of a shock or a powerful jerk, the force of attraction may not be enough. Therefore, although magnets ar...e widespread, they are still inferior in popularity to latches.

— Magnet/latch. An option that involves the presence of both types of mount in the kit - both a magnet and a latch. This allows you to choose an option at your discretion depending on the situation. For example, for quiet movement around the city and frequent stops during which you have to remove the recorder, a magnet is better suited, and a more reliable latch will be useful on a long journey, especially if the roads are of poor quality. At the same time, such versatility is not required so often, which is why this option has not become widespread.

- Screw. Fixation with a screw that is screwed into a socket on the recorder body. Connecting and disconnecting such a fastener takes noticeably longer than in the case of a latch or magnet, however, the reliability of fasteners of this type is very high - even a strong tug is more likely to tear off the suction cup or sticker that holds the entire structure than damage the screw mount.

— Fixed / non-removable. An option found exclusively in windshield recorders installed using a sticker (see “Attaching to glass”). The platform with the sticker in such models is rigidly fixed to the body; and in some models the role of such a platform is played by the upper side of the body, specially made flat. The advantages of fixed mounts are simplicity, compactness and high reliability. On the other hand, this installation method requires the recorder to be permanently on the glass and does not allow you to quickly remove it and put it back: removing the sticker is quite difficult, and it cannot be reused.

The sensor is a key element of any digital camera; it is from it and from signal processing technologies that the quality of the resulting image primarily depends. In this case, the type refers rather to the brand or brand of the matrix; it is usually indicated if the recorder is equipped with a high-quality sensor that is noticeably superior to most solutions on the market.

One of the most popular such options is Sony. The specific characteristics of the matrices ( IMX179, IMX222, IMX291, IMX307, IMX317, IMX322, IMX323, IMX326, IMX335, IMX415) may vary, but anyway, such a sensor is a sign of a high-end DVR.

In addition, there are models equipped with matrices from other manufacturers — Aptina, OmniVision, Samsung(GalaxyCore), Sandvik. Such solutions are generally considered to be simpler and more democratic than Sony — both in terms of price and functionality. Nevertheless, Samsung has a lot of developments in the field of electronics, and even such r...elatively “simple” sensors are usually more advanced and of higher quality than “know-names”.

Another manufacturer that produces fairly high-quality matrices is Panasonic. Such sensors are not as widespread as those described above, but they are still found in video recorders, including pretty advanced.

Model of the processor used in the dashcam

The term "video chip" is used mainly for devices with classic capabilities, "processor" — for advanced models with an abundance of non-standard functions. However, anyway, we are talking about the same component — the main computing unit, the characteristics of which directly affect the capabilities of the recorder as a whole. Knowing the model of the processor, you can find detailed data on it and evaluate how satisfied you are with a device based on such electronics. Of the most advanced modern chips, one can name, in particular, Ambarella A7L, Ambarella A12, Novatek NTK96655, Novatek NTK96660 and HiSilicon Hi3516.

The maximum resolution and frame rate of video recorded by the recorder in the HD (720p) standard.

The classic resolution for this standard is 1280x720, but there are other options in DVRs — in particular, 1280x960 (4:3 aspect ratio). Anyway, HD is not outstanding, but quite a decent indicator that allows you to get a video with good detail (for example, it is usually quite possible to make out numbers on cars in close proximity to a car on it).

As for the frame rate, the higher it is, the smoother and less blurry the video will be, the better the details on moving objects will be visible, and also the more space the footage will take up. It is worth noting here that in some inexpensive models, shooting in HD at very low speeds — 15 – 20 fps is used to reduce the cost. Such a shooting speed allows you to watch video more or less normally, but for a normal display of moving objects, a higher frame rate is still desirable — at least 25 frames / sec. It is also worth saying that, in general, for a comfortable perception by a person, a speed of 24 to 60 frames per second is considered quite sufficient, however, among the registrars there are models that can shoot HD at 120 fps. The meaning of this speed is to ensure that individual details on moving objects are as clearly visible as possible in slow motion or frame-by-frame viewing.

The maximum resolution and frame rate of video taken by the recorder in the Full HD (1080p) standard.

Many people associate the term Full HD with a resolution of 1920x1080 — and indeed, this resolution is very popular, including among DVRs. However, this standard also covers other options — in particular, 1440x1080 (4:3 aspect ratio) and 1920x540 (halved vertical size). In general, support for this resolution is a good indicator for a modern registrar, indicating that the device belongs to at least an average level.

As for the frame rate, the higher it is, the smoother and less blurry the video will be, the better the details on moving objects will be visible, and also the more space the footage will take up. It is worth noting here that in low-cost Full HD recorders, shooting can be carried out at very low speeds — 15 fps or even 10 fps. Such a shooting speed allows you to watch video more or less normally, but for a normal display of moving objects, a higher frame rate is still desirable — at least 25 frames / sec.

The viewing angle provided by the main camera of the dashcam. It is usually indicated along the diagonal of the frame, less frequently along the horizontal, which is why models with the same numbers in the specifications may differ somewhat in actual field of view. So, if you have any doubts about this, it wouldn't hurt to find and watch video samples from different models when selecting one.

All else being equal, a wider viewing angle allows you to cover more area, but individual details in the frame appear smaller. Furthermore, wide-angle lenses cause geometric distortions in the image (however, a DEWARP function may be provided to correct this, see "Features"). As for specific numbers, viewing angles up to 120° inclusive are considered relatively small for modern recorders, values of 121 – 140° can be called medium, 141 – 160° are above average, and the most wide-angle models are capable of covering an area of more than 160°.

Viewing angle of the additional dashcam camera. Depending on the design and configuration, it may refer to either an external camera or an interior camera (see above for both); this nuance should be clarified separately. The viewing angle can be specified both horizontally and diagonally, which is why models with the same figures in the specifications may slightly differ in their actual field of view. However, in this case, this difference is not critical.

In theory, a wider viewing angle allows for capturing a larger area, but individual details in the frame become smaller. Additionally, wide-angle lenses can cause geometric distortions at the edges of the image; the DEWARP technology (see "Features") used to eliminate them is usually not used in additional cameras.

Availability of a backup power source in the device's design. Such a source is activated when the main power from the vehicle's onboard network is unavailable, for finalizing recording when the ignition is turned off, in the event of an accident, and in other situations (e.g., if you need to view recorded videos on the dashcam).

— Battery. The battery "under the hood" of most dashcams usually has low capacity, sufficient for a few minutes of autonomous operation. Typically, this is a lithium-ion or lithium-polymer battery, which acts as an additional guarantee in case of emergencies. Primarily, the battery can be useful in the event of an accident: if damage causes power loss at the cigarette lighter socket, the dashcam will still remain operational and can continue recording for at least a few more minutes after the incident.

— Supercapacitor (ionistor). A special energy storage device - an ultra-high capacity capacitor. This type of storage has several advantages over a battery. Specifically, supercapacitors are immune to low and high temperatures, sunlight, they do not lose capacity as they wear out, and do not catch fire or explode even in extreme situations. Moreover, if a strong impact occurs (such as in an accident), this kind of power source is more likely to remain functional compared to a battery. Ionistors are rightly considered a much more advanced and reliable option...for backup power. However, the capacity of such a capacitor is only enough to save the last recorded video and power down correctly — it does not allow the device to operate autonomously even for a few minutes. Nonetheless, for typical dashcam use, nothing more is generally required, so in such cases, the practical advantages of this type of backup power noticeably outweigh its disadvantages.