USA
Catalog   /   Tools & Gardening   /   Power Tools   /   Drills & Screwdrivers

Comparison Dnipro-M ADL-1215 vs Dnipro-M ADL-12.0

Add to comparison
Dnipro-M ADL-1215
Dnipro-M ADL-12.0
Dnipro-M ADL-1215Dnipro-M ADL-12.0
Outdated Product
from $53.96 up to $71.28
Outdated Product
TOP sellers
Product typedrill driverdrill driver
Designgungun
Specs
Rotation speed1350 rpm1350 rpm
Torque
25 Nm
with adjustment /18 modes + drilling/
25 Nm
with adjustment /18 modes + drilling/
Reducer2-speed2-speed
Number of speeds
/350/1350 rpm/
/350/1350 rpm/
Reversesliderslider
Weight0.97 kg0.96 kg
Chuck
Chuck typekeylesskeyless
Chuck diameter10 mm10 mm
Wood drilling max. 20 mm20 mm
Metal drilling max. 10 mm10 mm
Features
Features
motor brake
LED light
motor brake
LED light
In box
case (bag)
charger
case (bag)
charger
Power supply
Power sourcebatterybattery
Battery in set22
Battery voltage12 V12 V
Battery capacity1.5 Ah1.5 Ah
Charging time60 min60 min
Added to E-Catalogapril 2018october 2016

Weight

The total weight of the tool is usually the device itself, without attachments. For battery models (see "Power Source"), usually, the weight is indicated with a standard battery installed; for battery-powered models, the weight can be given both with and without batteries, but in this case this point is not particularly important.

Other things being equal, less weight simplifies work, increases accuracy of movement and allows you to use the tool for longer without tiring. However, note that high power and productivity inevitably increase the mass of the tool; and various tricks to reduce weight increase the price and can reduce reliability. In addition, in some cases, a massive design is more preferable. First of all, this applies to work with a large load — for example, drilling holes of large diameter, or making recesses with impact: a heavy tool is more stable, it is less prone to jerks and shifts due to uneven material, vibration of mechanisms, etc.

It is also worth noting that specific weight values are directly related to the type of tool (see "Device"). Screwdrivers are the lightest — in most of them this figure does not exceed 500 g. Screwdrivers and drill drivers are more "heavy": their average weight is 1.1 – 1.5 kg, although there are many lighter ( 0.6 – 1 kg) and heavier ( 1.6 – 2 kg or more ) models. And clas...sic drills and wrenches have the greatest weight: such a tool must be quite powerful, so for them 1.6 – 2 kg is an average, 2.1 – 2.5 kg is above average, and many units weigh more than 2, 5 kg.
Dnipro-M ADL-12.0 often compared