USA
Catalog   /   Photo   /   Photo Accessories   /   Batteries

Comparison JETBeam 1xCR123 680 mAh vs Nitecore 1xCR123 650 mAh

Add to comparison
JETBeam 1xCR123 680 mAh
Nitecore 1xCR123 650 mAh
JETBeam 1xCR123 680 mAhNitecore 1xCR123 650 mAh
from $6.00
Outdated Product
from $8.19 up to $8.96
Outdated Product
TOP sellers
Size16340 (RCR123A)16340 (RCR123A)
TechnologyLi-IonLi-Ion
Qty per pack1 шт1 шт
Capacity680 mAh650 mAh
Voltage3.7 V3.7 V
Charge cycles500 раз500 раз
Added to E-Catalogaugust 2016april 2016

Capacity

The rated capacity of a battery is the amount of energy it can store.

This parameter directly determines how long the power supply can operate with a particular load. However, when assessing capacity, there are two things to consider. First, the capacitance rating is usually specified for a specific discharge power. So, for salt and alkaline full-size batteries (see “Technology”), this power is measured in tens of milliamps. But if it is significantly exceeded (on the order of hundreds of milliamps), the actual capacity of the battery may decrease significantly compared to the declared one. Therefore, for example, it is not recommended to use disposable batteries in digital cameras - the power consumption in such equipment can exceed 1000 mAh, and NiMh batteries cope best with such a load. And miniature silver-zinc batteries of the “300” series (SR) are available in two versions - for high and low discharge power; CR series button batteries can have a similar low-power version (for more details on both, see “Size”). More detailed information on discharge currents for different types and sizes of batteries/accumulators can be found in special sources; and in some cases (mainly for lithium-ion batteries) it is directly specified in the characteristics (see “Nominal discharge power”, “Maximum discharge power”).

The second caveat is that the actual energy reserve depends not only on the number of milliamp-hours declared, but also on the operating voltage;...so you can only compare by numbers in mAh batteries/accumulators with the same voltage (in extreme cases, with a similar voltage, for example, 3 V and 3.6 V). However, other comparisons are rarely required in practice.