USA
Catalog   /   Home & Renovation   /   Security Systems   /   Surveillance Cameras

Comparison Dahua DH-HAC-HDW1000MP-S3 vs Hikvision HiWatch DS-T106

Add to comparison
Dahua DH-HAC-HDW1000MP-S3
Hikvision HiWatch DS-T106
Dahua DH-HAC-HDW1000MP-S3Hikvision HiWatch DS-T106
Outdated ProductOutdated Product
TOP sellers
Mountoutdooroutdoor
Body typedomebeamed
Connection
BNC
BNC
Camera features
Design and features
light sensor
IR illumination
light sensor
IR illumination
Number of LEDs12
Illumination range30 m40 m
Matrix
Matrix typeCMOSCMOS
Matrix size1/4"1/4"
Number of megapixels1 MP1 MP
Video resolution1280x720 px1280x720 px
Frame rate25 fps25 fps
Minimum illumination0.05 lux0.10 lux
Aperturef/2.0f/1.2
Signal to noise ratio65 dB62 dB
Backlight compensationDWDR+BLC
Lens
Focal typepermanentvariable
Focal length
3.6 mm /2.8mm (option)/
2.8 – 12 mm
Horizontal viewing angle60 °71.8 °
General
Power source
12 В /maximum consumption — 2.8 W/
12 В /maximum consumption — 4 W/
Operating temperature-40 °C ~ +60 °С-40 °C ~ +60 °С
Maximum humidity95 %90 %
Protection levelIP67IP66
Materialmetal
Dimensions93.4x93.4x79.5 mm92x84.8x269.6 mm
Weight330 g1010 g
Color
Added to E-Catalogmay 2017december 2016

Body type

The case type describes not only its shape, but also some layout features that can affect the functionality of the product.

Dome. In accordance with the name, on the body of such a camera there is a characteristic transparent dome, inside of which there is a lens — and, usually, controlled by PTZ (see "Camera capabilities"). The dome not only protects the optics from various adverse factors (such as dirt or moisture), but in many models it also hides the position of the lens; for this it is darkened. Thus, the object of observation does not know where the camera is pointed, which is useful in some cases (for example, when observing a suspicious visitor in a supermarket). At the same time, for a number of reasons, this option is poorly suited for advanced optics with large dimensions.

Directed. Directional cameras are called cameras in which the lens "looks" along the body. This arrangement allows the use of powerful lenses with good aperture and optical zoom (see below), but the cameras are also quite bulky.

— Directional ( without a lens). A variation of the directional cameras described above, which has interchangeable lenses; The lenses themselves are usually not included in the kit, they must be purchased separately. The meaning of such a configuration is that the user can independently choose optics for specific needs. This categor...y includes mostly fairly advanced models.

Hidden. This category includes cameras of a small size, which allows them to be installed discreetly — for example, in a wall niche. However, even with an external installation (this option, usually, is also allowed), such devices are also very inconspicuous due to the mentioned compactness. By itself, the body shape of hidden cameras is most often close to directional (see above), although there may be different options.

Desktop. Cameras designed to be mounted on a tabletop or other flat, horizontal surface. For this, an appropriate stand is provided in the design; it can have movable mounts that allow you to tilt the camera and rotate it from side to side. The main advantage of such cameras is the utmost ease of installation; this, in particular, makes them almost perfect for home use.

Portable with fastening. In fact, it is a kind of desktop cameras (see the relevant paragraph), in which the stand can be used not only for installation on a horizontal surface, but also for wall mounting. From other "wall" varieties — hidden and directional (see relevant paragraphs) — cameras of this type differ in layout: their body is usually flat, rectangular or oval, and the lens is located on the widest edge (similar to how it is done in mobile phones ). The mount is often made movable, to adjust for tilt and/or rotation.

Number of LEDs

The number of backlight LEDs (see "Design and capabilities") provided in the camera design.

Theoretically, more LEDs provide more power and, accordingly, range (see below) and efficiency of IR illumination or LED illumination. However, in fact, such light sources can vary markedly in performance; in addition, a lot also depends on the features of the camera itself. Therefore, in fact, this indicator is a reference, and when choosing, it makes sense to pay attention to parameters that are closer to practice — in particular, the same backlight range (see below).

Illumination range

Operating range of the backlight (see "Design and capabilities") installed in the surveillance camera. This term usually means the maximum distance from the camera to the observed object, at which it is able to provide a relatively high-quality and legible image in the complete absence of other light sources. Of course, the actual backlight range may differ from the claimed one, and these differences are most often in the direction of increase (for example, due to the presence of the same additional light sources). However, if the possibility of shooting with backlight is important for you, you should focus on the claimed range.

Minimum illumination

The lowest degree of illumination of the scene being shot, in which the camera is able to provide normal visibility. Usually, this item specifies the values for the daytime mode of operation (in the night mode, the minimum illumination in many models may be zero at all, because in such cases the IR illumination is turned on, see "Design and capabilities"). And if the camera is capable of shooting in colour, it usually means the lowest illumination necessary to obtain a colour image.

The lower this indicator, the better the camera works in low light, the brighter and more clearly visible image it is able to provide in such conditions. At the same time, note that in low light, night mode is often preferable, and in the presence of the aforementioned IR illumination, it is more likely to focus on the range of its operation (see above).

There are comparative tables that allow you to evaluate the degree of illumination indicated in the characteristics from a practical point of view: for example, an indicator of 0.2 lux corresponds to clear eyes on a full moon.

Aperture

Aperture of the lens installed in the camera.

Aperture characterizes the degree of attenuation of the light flux when passing from the front lens of the lens to the matrix. It is denoted as the ratio of the diameter of the active aperture of the lens to the focal length, while the size of the active aperture is designated as f and is taken as a unit — for example, f / 1.4 or f / 2.0. Moreover, the smaller the number in the designation, the higher the aperture (in our example, the second lens will be darker than the first). And for lenses with a variable focal length (see "Focal"), the actual aperture, usually, changes with a change in focal length; for such models, either the range of aperture values, or its maximum value, can be indicated.

By itself, this parameter characterizes, first of all, how light the image taken through the lens turns out, all other things being equal. High values are important, first of all, when shooting in low light conditions: a fast lens allows you to get a fairly high-quality image without increasing the sensitivity of the matrix, which is fraught with noise and “blurring” of the picture. On the other hand, the actual quality of camera operation (including in dark conditions) also depends on many other factors — the type and size of the matrix, signal processing features, etc. Therefore, aperture in most cases is more of a reference than a practically significant parameter.

Signal to noise ratio

The signal-to-noise ratio that the surveillance camera corresponds to.

This indicator describes the ratio of the level of the useful signal (the actual image produced by the camera to an external device) to the level of extraneous noise that inevitably arises during the operation of electronic circuits. Such noise appears in the image as characteristic noise (“snow”). The higher the signal-to-noise ratio, the less interference on the screen, the clearer and better the image is, and the smaller the volume of recorded video files. It is believed that visible noise practically disappears at a ratio of at least 45 dB. However, among modern cameras there are also higher rates.

Backlight compensation

WDR (Wide Dynamic Range) — extended dynamic range. WDR technology combines several frames with different exposures into one picture, as a result, dark areas are brightened, and overexposures are darkened, and the output is a picture with extremely uniform lighting. The true wide dynamic range technology is called True-WDR and it is implemented in the optical circuit at the hardware level, a special microprocessor is responsible for creating and mixing exposures. A more affordable alternative to wide dynamic range is Digital-WDR technology, which equalizes lighting through software algorithms.

DWDR (Digital Wide Dynamic Range) — extended dynamic range technology based on software brightening algorithms. DWDR brightens too dark areas of the frame, which can be completely blurred against the background of light areas. Digital brightening allows you to noticeably improve the quality of shooting in contrasting lighting conditions. Digital WDR cameras are noticeably cheaper than true True-WDR optics. Of course, the quality of digital brightening is inferior to True-WDR.

BLC (Back Light Compensation) — backlight compensation technology. This system is based on the work of digital signal processors DSP. So, the device, relatively speaking, "breaks" the frame into many segments, making its own adjustments to each of them. Backlight compensation brightens dark areas of...the frame well. The main disadvantage of the technology is the increase in the brightness of the already bright areas of the frame, due to which overexposure may appear in the picture.

WDR+BLC. The camcorder supports several lightening technologies at once, each of which is described in more detail above. Immediately, we note that the combination of WDR + BLC allows you to achieve an extremely clear and clear picture in almost any lighting conditions, from extreme contrast to insufficient and excessively bright.

DWDR+BLC. The device supports two popular clarification technologies at once, each of which is described in more detail above. The presence of DWDR + BLC technologies allows the camera to effectively brighten the dark areas of the frame. Such video cameras have proven themselves well when working in low light conditions.

Focal type

Type of camera lens by focal length. Here are the options:

— Permanent. Fixed focal length lenses have a fixed angle of view — in other words, they work at a constant zoom level and are not able to change it (the only option available for such cameras is electronic zoom). The advantages of CCTV cameras with a fixed focal length are simplicity, reliability, almost zero power consumption, small size and low cost. The main disadvantage is the inability to work with optical zoom (see below); and said electronic magnification is less advanced, since when approaching, the clarity of the “picture” decreases.

— Variable (varifocal cameras). Zoom lenses are more complex than "fixed" lenses, are larger, are considered somewhat less reliable, and are noticeably more expensive. However, this type of optics has an important advantage: it is the only one capable of providing optical zoom (see below), which allows you to “zoom in” the image without compromising its quality.

Focal length

Focal length of the camera lens.

The focal length is such a distance from the lens to the matrix, at which a clear image is obtained on the matrix (when the lens is focused to infinity). The viewing angles of the lens primarily depend on this indicator (see below): the smaller it is, the wider the viewing angles and the smaller the objects in the frame (and vice versa). At the same time, it should be noted that the actual viewing angle is determined not only by the focal length, but also by the size of the matrix (see above). In fact, this means that with different sizes of matrices, lenses with the same focal length will have different working angles. Therefore, only cameras with the same matrix size can be compared with each other according to this indicator. Among CCTV cameras, lenses with a focal length of 2.8 mm, 3.6 mm, 4 mm and 6 mm are considered popular.

In models with a variable focal length (see above), in this case, the range from the minimum to the maximum distance is indicated. Also, using these data, you can derive the optical magnification factor of such a lens: for this, the maximum value must be divided by the maximum (for more details, see below).
Dahua DH-HAC-HDW1000MP-S3 often compared