USA
Catalog   /   Automotive   /   Car Audio   /   Car Subwoofers

Comparison Challenger OPUS SD-250 FA vs Challenger OPUS SD-200 FA

Add to comparison
Challenger OPUS SD-250 FA
Challenger OPUS SD-200 FA
Challenger OPUS SD-250 FAChallenger OPUS SD-200 FA
Outdated ProductOutdated Product
TOP sellers
Application areacarcar
DesignFreeAir (without case)FreeAir (without case)
Typepassivepassive
Size10" (25 cm)8" (20 cm)
Tech specs
Rated power200 W150 W
Max. power400 W300 W
Sensitivity88 dB86 dB
Impedance4 ohm4 ohm
Resonant frequency33.36 Hz50.47 Hz
General
Diffuser materialpulp / paperpulp / paper
Woofer Diameter250 mm200 mm
Added to E-Catalogoctober 2017october 2017

Size

The size (diameter) of the main subwoofer speaker. In all types of subwoofers, this parameter primarily affects the power and depth of sound: the larger the speaker, the louder it is and the deeper the bass it can provide (ceteris paribus). However with an increase in the size and dimensions, they increase accordingly, which determines the installation possibilities. The latter is especially true in Free Air subwoofers (see "Execution"): some cars are initially equipped with "seats" for a certain size, and it is difficult to install models with other dimensions there.

Now on the market there are subwoofers with such popular sizes: 5" (13 cm), 6" (15.25 cm), 6.3" (16 cm), 6.5" (16.5 cm), 6.75" (17 cm), 8" (20 cm ), 8.25"(21cm) , 9" (23cm ), 10" (25cm ), 11" (27cm), 12"(30cm) , 13" (33cm), 15"(38cm) , 16 " (40 cm), 18" (46 cm).

Rated power

The average (root mean square — RMS) power of the input signal, at which the subwoofer is able to work continuously without negative consequences (damage, failure) for at least an hour. The rated power of the subwoofer must be greater than the power of the amplifier connected to it — in order to avoid overloads.

Max. power

The maximum signal power that the subwoofer is able to withstand for a short time (up to several seconds) without any negative consequences. When selecting an amplifier-subwoofer pair, it is recommended to take a subwoofer with a maximum power of at least twice the maximum power of the amplifier. In general, the higher the maximum power, the more resistant the subwoofer is to overloads.

Sensitivity

Sensitivity determines the loudness of the subwoofer when a signal of a certain power is connected to it: with equal signal power and impedance (see below), the subwoofer with the higher sensitivity will sound louder.

Resonant frequency

The natural frequency of the cone in the subwoofer speaker, namely the frequency with which the cone will oscillate if the speaker is suspended freely in the air and a single impulse is transmitted to the cone (for example, by clicking on it with your finger). In subwoofers, this parameter determines, in particular, the lower limit of the frequency range (see above): at frequencies below the resonant sound power drops sharply. Accordingly, for deep rich bass, the resonant frequency should be as low as possible. This parameter is also used to calculate the size of the enclosure for the subwoofer.

Woofer Diameter

Subwoofer main speaker size. The diameter of the woofer determines the size of the device (see above).
Challenger OPUS SD-250 FA often compared