USA
Catalog   /   Small Appliances   /   Home Appliances   /   Water Filters

Comparison Bio Systems RO-50-SL02M vs Ecosoft MO 575 PSECO

Add to comparison
Bio Systems RO-50-SL02M
Ecosoft MO 575 PSECO
Bio Systems RO-50-SL02MEcosoft MO 575 PSECO
from $181.60 up to $225.40
Outdated Product
from $165.20 up to $333.16
Outdated Product
TOP sellers
Typekitchen sinkkitchen sink
Reverse osmosis
Connectionto the water supplyto the water supply
Purpose
for cold water
for cold water
Specs
Number of flasks33
Stages of purification65
Pollution clipping0.01 µm0.01 µm
Filtration speed0.16 L/min0.19 L/min
Tank volume12 L12 L
Min. operating pressure2.6 atm3 atm
Max. operating pressure6 atm6 atm
Max operating temperature45 °C30 °C
Water mineralization
Filtration
Types of filtration
mechanical impurities
organic impurities
active chlorine
ferrous
heavy metal ions
pesticides
nitrates
cadmium
petroleum products
hardness salts
mechanical impurities
organic impurities
active chlorine
ferrous
heavy metal ions
pesticides
nitrates
cadmium
petroleum products
hardness salts
More features
Cartridge size10SL (10"x2.5")10SL (10"x2.5")
Fitting size½"
Tap
Pump
Added to E-Catalognovember 2016september 2015

Stages of purification

The number of purification stages provided for in the filter design. At each stage, water passes through its own filter element, clearing itself of certain contaminants; in this case, the steps are arranged in order from coarser cleaning to finer. For example, a three-stage system may look like this: the first stage is mechanical removal of impurities, the second stage is the removal of ferrous, and the third is filtration through a carbon cartridge.

The more stages of purification — the more advanced the filter is considered, the cleaner water it usually provides at the outlet. Accordingly, this moment largely depends on the purpose (see “Type”): for example, multi-stage filtration is quite rare in main models, it is practically not used at all in pre-filters, but the number of stages can reach 9 in models for sink.

Filtration speed

The amount of water that the filter is able to pass through itself per unit of time (of course, effectively purified in the process); usually stated in liters per minute. This parameter is largely related to the type (see above): for example, in jugs, the filtration rate usually does not exceed 0.5 L per minute, while for main devices that supply entire apartments, a throughput of tens or even hundreds of liters is required.

Note that it does not always make sense to pursue a high filtration rate. After all, other things being equal, finer cleaning takes more time; accordingly, the faster the filter works, the higher the chance that the quality of such cleaning will be relatively low. And devices that purify water efficiently and quickly usually have an appropriate price. Therefore, it is worth considering the purpose of the filter and, on the basis of this, determine the balance between the filtration speed and its quality when choosing. It is also worth keeping in mind the conditions of use: for example, if you need to filter low-quality tap water for drinking, it is better to sacrifice speed in favor of efficiency.

Min. operating pressure

The lowest inlet water pressure at which the filter is able to fully perform its functions. Indicated for models with a connection to the water supply — directly or through a tap (see "Connection").

The design of some filters requires a certain level of inlet pressure for normal operation; if the pressure is insufficient, both throughput and overall filter efficiency suffer, and some functions are not available at all. The latter is especially true for reverse osmosis (see above). Therefore, if the minimum operating pressure is directly indicated in the filter characteristics, you should make sure that your water supply system complies with this parameter before purchasing.

Note that for filters with a booster pump, this column indicates the lowest pressure at which the filter still does not require the use of a pump; see "Pump" for details.

Max operating temperature

The highest inlet water temperature at which the filter is able to operate normally. Modern filters are conditionally divided into models for cold and hot water: the operating temperature in the first case does not exceed 40 °C, and in the second it can reach 95 °C. For more information on the importance of matching water temperature and filter characteristics, see "Purpose".

Water mineralization

The presence of a water mineralizer in the filter design. The mineralizer is usually a container filled with a special slowly dissolving mixture. Thanks to it, filtered water is saturated with various micronutrients: calcium, potassium, fluorine, ferrous (of course, not harmful colloidal ferrous, but another easily digestible form) and others. They have a positive effect on the human body and improve the taste of the water itself compared to completely purified water.

Mineralizers are found mainly in filters equipped with reverse osmosis systems (see above): the fact is that during the operation of such systems, not only harmful impurities are removed from the water, but also the mentioned micronutrients that got there naturally.

Fitting size

The diameter of the pipes to which the filter is designed to be connected; indicated only for models with water connection, see "Connection". In plumbing, pipes of standard diameters are usually used, and inches are used for measurement — for example, 0.75", 1", etc. Most filters are equipped with a set of adapters for different pipe diameters, therefore, most likely there will be no connection problems, even if the initial diameters do not match. Nevertheless, it is best to choose a filter that matches your water supply in terms of fitting size — in this case, the connection is more reliable, and compliance with the claimed characteristics will be complete.
Bio Systems RO-50-SL02M often compared
Ecosoft MO 575 PSECO often compared