USA
Catalog   /   TVs & Video   /   Projection Equipment   /   Projectors

Comparison Epson EB-U05 vs Epson EB-X31

Add to comparison
Epson EB-U05
Epson EB-X31
Epson EB-U05Epson EB-X31
Outdated Product
from $426.00 up to $566.52
Outdated Product
TOP sellers
Main functionuniversaluniversal
Lamp and image
Lamp typeUHEUHE
Lamp modelELPLP88
Service life6000 h
5000 h /10000 h in economy mode/
Service life (energy-saving)10000 h
Lamp power210 W200 W
Brightness
3400 lm /2110 lm in economy mode/
3200 lm /2240 lm in economy mode/
Dynamic contrast15 000:115 000:1
Colour rendering1 billion colours1 billion colours
Horizontal frequency15 – 92 kHz15 – 92 kHz
Frame rate50 – 85 Hz50 – 85 Hz
Projection system
Technology3LCD
3LCD /3 х 0.55" P-Si TFT/
Size0.67"
Real resolution1920x1200 px
1024x768 px /XGA/
Image format support16:10, 4:3, 16:94:3, 16:9, 16:10
Projecting
Rear projection
Throw distance, min0.9 m
Throw distance, max10.8 m
Image size30 – 300 "30 – 300 "
Throw ratio1.38:1 – 1.68:1
Optical zoom1.2 x1.2 x
Zoom and focusmanualmanual
Keystone correction (vert), ±30 °
Keystone correction (horizontal), ±30 °
Features
Features
MHL support
 
Wi-FiWi-Fi ready
Hardware
USB 2.011
Number of speakers11
Sound power2 W2 W
Video connectors
VGA
 
composite
VGA
S-Video
composite
HDMI inputs21
HDMI versionv 1.4
Audio connectors
RCA (audio)
RCA (audio)
Service connectors
USB (slave)
USB (slave)
General
Noise level (nominal)28 dB
37 dB /28 dB in economy mode/
Power sourcemainsmains
Power consumption
277 W /207 W in economy mode/
Size (HxWxD)92x302x252 mm82x297x234 mm
Weight2.8 kg2.4 kg
Color
Added to E-Catalogdecember 2017january 2016

Lamp model

The lamp model that the projector is designed for. Most projectors come with lamps included, so this information is not needed for normal use. But when looking for a spare lamp or replacement, information about model can be very useful: finding a spare part by the exact name is much easier than by general data like the brand of the projector.

Service life

Minimum projector lamp life as stated by the manufacturer. Specified by the total time of continuous operation. Note that if the projector was operated without violations, then upon reaching this time, the lamp will not necessarily fail — on the contrary, it can work for quite a long time. However, when evaluating durability, it is best to focus on the claimed service life.

Service life (energy-saving)

When working in economy mode, the brightness of the backlight is noticeably reduced, on average by 30-50%. With a decrease in brightness, heat dissipation also decreases, which saves the working life of the illuminator, thereby increasing the lamp life. Thus, the ECO mode allows you to extend the lamp life by an average of 30%. If the typical projector lamp life is 4000 hours, regular use of the ECO mode will extend the backlight life to approximately 5500 hours.

Lamp power

The power consumption of the backlight lamp installed in the projector.

Theoretically, the more powerful the lamp, the brighter it is. However, this is only true when comparing lamps of the same type (see above); and even in this case, the brightness may also depend on the nuances of the design. Therefore, when evaluating the capabilities of a lamp, it is worth focus not so much on power, but on the directly claimed brightness in lumens (see below).

But what this parameter directly affects is the total power consumption of the projector: the lamp is the most “greedy” component of the device, compared to it, the power consumption of the rest of the electronics is very small. Also note that many powerful lamps have high heat dissipation and require cooling systems, which affects the size and weight of the projector.

Brightness

The brightness of the image produced by the projector at maximum backlight brightness. Usually, the average brightness of the screen, derived from a special formula, is indicated. The higher it is, the less the image depends on ambient light: a bright projector can provide a clearly visible image even in daylight, but a dim one will require dimming. On the other hand, increasing brightness reduces contrast and accuracy of colour reproduction.

Accordingly, when choosing this parameter, you need to consider the conditions in which you plan to use the projector. So, for office or school/university use, a brightness of at least 3000 lm is desirable — this allows you to get normal visibility without obscuring the room. In turn, among the top models a very low brightness can be found, because. such projectors are usually installed in rooms specially designed for them with good darkness level. And in ultra-compact devices it is impossible to achieve high brightness for technical reasons.

Detailed recommendations on the optimal brightness for certain conditions can be found in special sources. Here we note that anyway, it is worth choosing according to this indicator with some margin. As mentioned above, as brightness increases, contrast and colour quality decrease, and you may need to use the projector at a reduced brightness to achieve the desired picture quality.

Size

The size of the panel/chip affects the depth and final quality of the image. The larger the panel/chip, the more light it is able to process, which means the picture will be clearer and more structured. The average projector has a sensor of 0.5-0.7″, advanced projectors use sensors of 1.2-1.5″ and more.

Real resolution

The native resolution of the image produced by the projector matrix.

The minimum for modern projectors is actually the VGA standard, which assumes a resolution of 800x600 or close to it. The most limited of modern high-definition standards is HD (720); the classic size of such a frame is 1280x720, but projectors also have other options (up to 1920x720). A more advanced HD format is Full HD (1080), which also has several variations (the most popular is 1920x1080). And among high-end projectors there are models of Quad HD, Ultra HD (4K) and even Ultra HD (8K) standards.

In general, the higher the resolution, the clearer and more detailed image the projector can produce. On the other hand, this indicator directly affects the cost, and all the benefits of high resolution can only be appreciated if the reproduced content also corresponds to it. Note that modern projectors can work with higher resolutions than the “native” ones – for more details, see “Maximum video resolution”.

Image format support

Image formats supported by the projector.

In this case, format means the aspect ratio of the image. The general rule in this case is that the projector must support the same format in which the original content is recorded. Otherwise, the image will either be stretched in height or width, or with black stripes on the sides or top-bottom. Specifically, the formats can be divided into three main categories:

— Traditional, or rectangular. Classic formats in which the height of the picture is not much less than the width. The most popular options are 4:3, widely used in analogue TV, and 5:4, common in computer technology. Traditional formats are well suited for presentations, working with documents and graphics, and other similar tasks.

Widescreen — formats in which the frame width is significantly (more than 1.5 times) greater than the height. The most popular of these standards are 16:9 and 16:10. These aspect ratios are well suited for games and movies; in particular, most high-definition content (HD 720p and above) is recorded in widescreen format.

Extra wide. The formats are even wider than the widescreen ones described above — for example, 21:9. Mainly used in cinematography.

It is worth noting that many modern projectors are able to work with several types of formats at once — for example, with classic 4:3 and...wide-angle 16:9.

Throw distance, min

The closest distance to the screen that the projector can be used on. Typically, this is the minimum distance at which the image from the projector remains in focus.

This parameter is especially important if the device is to be placed at a small distance from the screen (for example, in a cramped room). Some modern projectors are able to work normally at a distance of 10 – 20 cm. Also note that the throw distances are determined primarily by the lens, and if the initial range of these distances does not suit you, perhaps the situation can be solved by replacing the optics.
Epson EB-U05 often compared
Epson EB-X31 often compared