USA
Catalog   /   Climate, Heating, Water Heating   /   Water Supply & Pumps   /   Pressure Tank Units

Comparison GARDENA Premium 5000/5 Eco Inox vs GARDENA Comfort 5000/5 Eco

Add to comparison
GARDENA Premium 5000/5 Eco Inox
GARDENA Comfort 5000/5 Eco
GARDENA Premium 5000/5 Eco InoxGARDENA Comfort 5000/5 Eco
from $315.56 up to $372.00
Outdated Product
from $918.72 
Outdated Product
TOP sellers
Suitable forclean waterclean water
Specs
Maximum performance
4500 L/h /maximum/
4500 L/h /maximum/
Maximum head
50 m /maximum/
50 m /maximum/
Max. pressure5 bar5 bar
Pump typecentrifugalcentrifugal
Suction typeself-primingself-priming
Suction height8 m8 m
Maximum liquid temperature60 °С60 °С
Volume of water pressure tank24 L24 L
Suction systemsingle-stagesingle-stage
Outlet size1"1"
Inlet hole size1"1"
Engine
Maximum power1200 W1100 W
Power sourceelectricelectric
Mains voltage230 V230 V
General specs
Noise level84 dB
Protection class (IP)X4X4
Country of originGermanyGermany
Pump housing materialplasticplastic
Impeller / auger materialplasticplastic
Water pressure tank materialstainless steelsteel
Weight17 kg17 kg
Added to E-Catalognovember 2014november 2014

Maximum power

Rated power of the pump motor. The more powerful the engine, the higher the performance of the unit, usually, the greater the pressure, suction height, etc. Of course, these parameters largely depend on other features (primarily the pump type, see above); but models similar in design can be compared in terms of power.

Note that high power, usually, increases the size, weight and cost of the pump, and also implies high costs of electricity or fuel (see "Power source"). Therefore, it is worth choosing a pump according to this parameter taking into account the specific situation; more detailed recommendations can be found in special sources.

Noise level

The noise level produced by the pump during normal operation. For comparison, 50 decibels roughly corresponds to the noise in an office room, 60 dB to an average TV volume, 70 dB to a truck at a distance of about 8 m, 80 dB to traffic noise, and 90 dB to a scream. The lower the noise level, the more comfortable the use of the pump and the closer it can be placed to people. This parameter is especially important for models designed for indoor installation.

Water pressure tank material

The material of the water pressure tank provided in the design of the pumping station.

Recall that the classic (not sewer) pumping station is a surface pump, supplemented by a water pressure tank. Such a tank is a reservoir where water accumulates. It performs two functions: it smooths out pressure drops in the system and stores some water in case the pump is turned off. For the main body in such containers, the following materials can be used:

— Cast iron. The simplest and most inexpensive option: cast iron is somewhat inferior to stainless steel in terms of strength and corrosion resistance. However, for those models in which it is used, these moments do not have a noticeable meaning.

— Stainless steel. The most advanced material in use: stainless steel combines high strength and corrosion resistance. However, such tanks are somewhat more expensive than other varieties.

— Steel. Non-stainless steel accumulators usually use special coatings to protect against corrosion. This material is superior to cast iron in strength and is somewhat cheaper than stainless steel.

— Aluminium. The main advantage of aluminium alloys is their light weight combined with quite decent strength and rust resistance. Of the shortcomings, a rather high price can be noted.
GARDENA Premium 5000/5 Eco Inox often compared
GARDENA Comfort 5000/5 Eco often compared