USA
Catalog   /   Computing   /   Components   /   RAM

Comparison Patriot Memory Signature DDR4 2x8Gb PSD416G2133KH vs GOODRAM DDR4 2x8Gb GR2133D464L15S/16GDC

Add to comparison
Patriot Memory Signature DDR4 2x8Gb PSD416G2133KH
GOODRAM DDR4 2x8Gb GR2133D464L15S/16GDC
Patriot Memory Signature DDR4 2x8Gb PSD416G2133KHGOODRAM DDR4 2x8Gb GR2133D464L15S/16GDC
from $161.78
Outdated Product
from $117.49 up to $133.44
Outdated Product
TOP sellers
Memory capacity16 GB16 GB
Memory modules22
Form factorDIMMDIMM
TypeDDR4DDR4
Specs
Memory speed2133 MHz2133 MHz
Clock speed17000 MB/s17000 MB/s
CAS latencyCL15CL15
Memory timing15-15-1515-15-15
Voltage1.2 V1.2 V
Coolingradiatorno cooling
Module profilestandardstandard
Module height32 mm
Added to E-Catalogjuly 2016april 2016

Cooling

Type of cooling provided in the design of RAM.

No refrigeration. The lack of special cooling is typical for memory modules with low and medium power — they do not emit so much heat that it needs to be specially removed.

— Radiator. A device in the form of a metal structure with a characteristic ribbed surface — this form increases the area of \u200b\u200bcontact with air, which, in turn, improves heat transfer. The simplest type of cooling system is inferior in efficiency to a radiator with a cooler and even more so to a water circuit (see below), but it does not create noise, does not consume excess energy and does not require additional power or tubes. And the mentioned efficiency is enough even for quite powerful RAM modules.

— Radiator with cooler. Radiator cooling(see above), supplemented by a block with a fan (fans) for forced air circulation. This add-on significantly increases the efficiency of the heatsink; it can be used even in fairly powerful RAM sets. On the other hand, the fan creates noise during operation and significantly increases power consumption.

— Water cooling. Cooling in the form of a liquid heat exchanger connected to the water cooling circuit of the computer system. A distinctive external feature of such cooling are two characteristic pipes. Water systems are very efficient and suitable even for the mo...st powerful and “hot” sticks, but they are difficult to connect and require expensive external equipment, and therefore they are mainly used among top RAM models, in which such cooling is in principle indispensable. Note that some of these models allow operation “dry”, without water, but this is not recommended — failures may occur at high loads.

— Liquid-air. In accordance with the name, this option involves the use of two types of cooling at once — air (radiator) and water. See above for both, but it is worth noting that in this case water cooling can be provided in a somewhat “truncated” form — not in the form of pipes for connecting to a common cooling circuit, but in the form of a sealed capsule with a heat-conducting liquid. In terms of efficiency, such systems, of course, noticeably lose to classical liquid ones — but they do not require complex connections; and the capsule somehow improves the efficiency of the radiator, and it looks unusual.