USA
Catalog   /   Computing   /   Components   /   RAM

Comparison HyperX Fury DDR4 1x8Gb HX426C16FB2/8 vs Crucial Ballistix Tactical DDR4 1x8Gb BLT8G4D26AFTA

Add to comparison
HyperX Fury DDR4 1x8Gb HX426C16FB2/8
Crucial Ballistix Tactical DDR4 1x8Gb BLT8G4D26AFTA
HyperX Fury DDR4 1x8Gb HX426C16FB2/8Crucial Ballistix Tactical DDR4 1x8Gb BLT8G4D26AFTA
Compare prices 3
from $51.00
Outdated Product
TOP sellers
Memory capacity8 GB8 GB
Memory modules11
Form factorDIMMDIMM
TypeDDR4DDR4
Memory ranksingle ranksingle rank
Specs
Memory speed2666 MHz2666 MHz
Clock speed21300 MB/s21300 MB/s
CAS latencyCL16CL16
Memory timing16-18-1816-16-16
Voltage1.2 V1.2 V
Coolingradiatorradiator
Module profilestandardstandard
Module height34 mm35.6 mm
More features
overclocking series
XMP
overclocking series
XMP
Color
Added to E-Catalogmay 2017april 2016

Memory timing

Timing is a term that refers to the time it takes to complete an operation. To understand the timing scheme, you need to know that structurally RAM consists of banks (from 2 to 8 per module), each of which, in turn, has rows and columns, like a table; when accessing memory, the bank is selected first, then the row, then the column. The timing scheme shows the time during which the four main operations are performed when working with RAM, and is usually written in four digits in the format CL-Trcd-Trp-Tras, where

CL is the minimum delay between receiving a command to read data and the start of their transfer;

Trcd — the minimum time between the selection of a row and the selection of a column in it;

Trp is the minimum time to close a row, that is, the delay between the signal and the actual closing. Only one bank line can be opened at a time; Before opening the next line, you must close the previous one.

Tras — the minimum time the row is active, in other words, the shortest time after which the row can be commanded to close after it has been opened.

Time in the timing scheme is measured in cycles, so the actual memory performance depends not only on the timing scheme, but also on the clock frequency. For example, 1600 MHz 8-8-8-24 memory will run at the same speed as 800 MHz 4-4-4-12 memory—in either case timings, if expressed in nanoseconds, will be 5-5-5-15.
HyperX Fury DDR4 1x8Gb often compared
Crucial Ballistix Tactical DDR4 1x8Gb often compared