Comparison NEXTBASE 522GW vs NEXTBASE 422GW

The type of connector used in the recorder to power it. First of all, you should pay attention to this item if you plan to change the registrar with ready-made wiring for one or another type of connector ( miniUSB, microUSB, USB-C, DC 12V). Thus, the replacement of the registrar rests simply on installing a new one without re-changing the cable.

The diagonal of the display installed in the DVR.

A large display, on the one hand, provides additional convenience, on the other hand, it affects the dimensions and price of the entire device. Therefore, manufacturers choose a diagonal in such a way that the device can be used normally and at the same time it is not too expensive and bulky. So, for a classic registrar that does not have additional functions, a small display is enough — 2 – 2.5", 1.5 – 2", or even less : it completely allows you to manage the settings and control what exactly gets into the frame, and to fully view the footage, you still need a computer, TV or other large screen. A size of 2.5 – 3 " by the standards of such devices can already be called average, and screens of 3" or more are typical mainly for fairly advanced models, often with an abundance of additional functions.

Also note that there are models that do not have a display at all. To control the operation parameters and check the position of the frame, such a recorder is connected to an external device — for example, to a smartphone via Wi-Fi.

Resolution of the display installed in the recorder.

The higher the resolution (with the same diagonal) — the clearer the image is, but the more expensive the screen itself. At the same time, high resolutions are not needed to set the camera in the desired position and to work with the basic settings of the device. So you should pay attention to this parameter only if you plan to use additional functions that require a high-quality “picture” — for example, a GPS navigator (see “Functions”) or a remote camera that plays the role of a reversing camera.

Availability of a backup power source in the device's design. Such a source is activated when the main power from the vehicle's onboard network is unavailable, for finalizing recording when the ignition is turned off, in the event of an accident, and in other situations (e.g., if you need to view recorded videos on the dashcam).

— Battery. The battery "under the hood" of most dashcams usually has low capacity, sufficient for a few minutes of autonomous operation. Typically, this is a lithium-ion or lithium-polymer battery, which acts as an additional guarantee in case of emergencies. Primarily, the battery can be useful in the event of an accident: if damage causes power loss at the cigarette lighter socket, the dashcam will still remain operational and can continue recording for at least a few more minutes after the incident.

— Supercapacitor (ionistor). A special energy storage device - an ultra-high capacity capacitor. This type of storage has several advantages over a battery. Specifically, supercapacitors are immune to low and high temperatures, sunlight, they do not lose capacity as they wear out, and do not catch fire or explode even in extreme situations. Moreover, if a strong impact occurs (such as in an accident), this kind of power source is more likely to remain functional compared to a battery. Ionistors are rightly considered a much more advanced and reliable option...for backup power. However, the capacity of such a capacitor is only enough to save the last recorded video and power down correctly — it does not allow the device to operate autonomously even for a few minutes. Nonetheless, for typical dashcam use, nothing more is generally required, so in such cases, the practical advantages of this type of backup power noticeably outweigh its disadvantages.