Surface treatment
Type of own screen cover in monoblock (see "Type").
—
Glossy. The most common type of coating in modern PCs. Such a surface (with the same characteristics of the matrix) noticeably surpasses the matte one in terms of brightness and colour saturation in the visible image. The main disadvantage of gloss is the tendency to glare in bright ambient light; however, all-in-one PCs are not often used in such conditions, and this phenomenon can be compensated by increasing the brightness of the backlight. With all this, this type of coverage is quite inexpensive.
—
Glossy (anti-glare). A modified version of the glossy finish (see above) that, as the name suggests, is more resistant to glare. At the same time, in terms of picture quality, such screens are usually not inferior to classic gloss. On the other hand, the anti-reflective surface is somewhat more expensive, and its advantages in this case are not often really significant. Therefore, screens with such a coating are found in modern monoblocks much less often than glossy ones.
—
Matte. The key advantages of a matte finish are its low cost and the almost complete absence of glare, even in bright ambient light. On the other hand, the image on such a screen is dimmer than on glossy displays (including anti-glare) with similar matrix characteristics. Therefore, this type of coating is rarely used
...nowadays — mainly in relatively inexpensive household and business models, for which a bright picture with saturated colours is not fundamental.Chipset
The model of the chipset used in the standard configuration of the PC.
A chipset can be described as a set of chips that provides the combined operation of the central processor, RAM, I / O devices, etc. It is this chipset that underlies any motherboard. Knowing the chipset model, you can find and evaluate its detailed characteristics; most users do not need such information, but for specialists it can be very useful.
Type
The general type (specialization) of the processor installed in the PC.
—
Desktop. Processors originally designed for full-sized desktop computers. The specific characteristics of such CPUs can vary quite widely; however, in general, they have higher processing power than mobile chips, as well as a wider range of additional features and special solutions to improve efficiency. And with the same actual performance, desktop solutions are much cheaper than mobile ones. The downside of these advantages is the relatively high energy consumption and heat dissipation. However, for full-sized PCs, these shortcomings are not critical, so almost all traditional desktop computers, as well as most all-in-ones (see "Type") are equipped with this particular type of processor; and for powerful gaming models, a desktop CPU is mandatory by definition. On the other hand, this category also includes rather economical and "cold" low-power chips, which are suitable for compact computers that do not require high performance, such as nettops and thin clients.
—
Mobile. This term in this case refers to processors originally designed for laptops. Most of these CPUs use the same basic architecture as desktop models — x86. Their main differences are: on the one hand, reduced energy consumption, reduced clock frequencies and low heat generation, on the other hand, less computing power in general. However the actu
...al characteristics of such processors may vary from model to model, some laptop solutions are not inferior to fairly advanced desktop ones; however, with similar capabilities, a laptop processor will cost significantly more. Thus, this type of CPU is mainly used in nettops and individual models of monoblocks (see "Type"), where it is difficult to use powerful cooling systems.
A rarer variety of mobile processors used in modern PCs are chips based on the basic ARM architecture. Such processors have even lower heat dissipation and power, and are also often implemented in the System-On-Chip format, when the CPU itself, RAM, wired and wireless connection controllers, and other components are combined in one chip. ARM solutions can be found in Android touchscreen all-in-ones (which are effectively "desktop tablets"), as well as in individual thin clients.Model
The specific model of the processor installed in the PC, or rather, its index within its series (see "Processor"). The full model name consists of the series name and this index — for example, Intel Core i3 3220; knowing this name, you can find detailed information about the processor (characteristics, reviews, etc.) and determine how suitable it is for your purposes.
Speed
Clock speed of the CPU installed in the PC.
In theory, higher clock speeds have a positive effect on performance because they allow the CPU to perform more operations per unit of time. However, this indicator is rather weakly related to real productivity. The fact is that the actual capabilities of the CPU strongly depend on a number of other factors - the overall architecture, cache size, number of cores, support for special instructions, etc. As a result, you can compare by this indicator only chips from the same or similar series (see “CPU”), and ideally, also from the same generation. And that's pretty approximate.
Graphics card model
The main manufacturers of video cards nowadays are
AMD,
NVIDIA and Intel, and each has its own specifics. NVIDIA produces primarily discrete solutions; Among the most common are
the GeForce MX1xx,
GeForce MX3xx,
GeForce GTX 10xx series (in particular
GTX 1050,
GTX 1050 Ti and
GTX 1060),
GeForce GTX 16xx,
GeForce RTX 20xx,
GeForce RTX 30xx(
GeForce RTX 3060,
GeForce RTX 3060 Ti,
GeForce RTX 3070,
GeForce RTX 3070 Ti,
GeForce RTX 3080,
GeForce RTX 3080 Ti, GeForce RTX 3090,
GeForce RTX 3090 Ti),
GeForce RTX 4060 , GeForce RTX 4060 Ti,
GeForce RTX 4070,
GeForce RTX 4070 SUPER,
GeForce RTX 4070 Ti,
GeForce RTX 4070 Ti SUPER,
Ge Force RTX 4080,
GeForce RTX 4080 SUPER,
GeForce RTX 4090 and separate
Quadro series. AMD offers both discrete and integrated graphics - including the popular
Radeon RX 500,
Radeon RX 5000,
Radeon RX 6000,
Radeon RX 7000 and
AMD Radeon Pro series. And Intel deals exclusively with modules integrated into processors of its own production - these can be HD Graphics, UHD Graphics and Iris.
Note that many configurations with discrete graphics also have an integrated graphics module; in such cases, the name of the discrete video card is indicated as more advanced.
Graphics memory
The amount of native memory provided by the discrete graphics card (see "Graphics card type").
The larger this volume, the more powerful and advanced the video adapter is, the better it handles with complex tasks and, accordingly, the more expensive it is. Nowadays,
2 GB and
3 GB are considered quite modest,
4 GB are not bad,
6 GB and
8 GB are very solid, and more than 8 GB means that we have a specialized PC built for maximum graphics performance.
Rotational latency
The nominal rotation speed of the hard drive spindle (see "Drive type") installed in the PC.
The platters of hard drives in working condition rotate constantly. The standard rotation speeds found in modern PCs are 5400 and 7200 rpm (revolutions per minute — revolutions per minute). A higher rotation speed speeds up data access, but significantly affects the cost of the drive. In addition, "fast" drives are considered less reliable (which is often offset by various design tricks, but they also affect the price).
USB 2.0
The number of full size USB 2.0 connectors on the back of the PC.
USB is the most popular modern interface for connecting peripherals. And the number of connectors is, accordingly, the number of devices that can be simultaneously connected to the rear panel without the use of splitters. Specifically, version 2.0 was the most popular some time ago, but now it is considered obsolete, it is gradually being replaced by more advanced standards like USB 3.0 (3.1 gen1). However, USB 2.0 capabilities (data transfer rates up to 480 Mbps) are still sufficient for many peripheral devices, from keyboards and mice to printers. So it's still a long way from the end of the standard, and some PCs may have
4 or more USB 2.0 ports on the back.
Separately, it should be noted that similar connectors can be placed on the front side of the case. However, for peripherals that need to be constantly connected to the computer, it is more convenient to use the rear panel, while the front placement is better suited for frequent connection / disconnection.
