Comparison TEXI Bro vs Rold Q36

The type of shuttle provided in the design of the sewing machine.

The shuttle is a device for feeding the lower thread; This is where the bobbin and thread is inserted. The following types of shuttles are found in modern machines:

- Rocking. Swinging shuttles have only a vertical layout. This is a simple, inexpensive and at the same time reliable mechanism, which also makes the device almost “omnivorous”: many models with swinging shuttles are able to cope with thick, coarse fabrics that are “too tough” for other types of machines. In addition, in such a shuttle it is very easy to adjust the method of thread tension. Among the disadvantages of this option, it is worth noting the increased level of vibration and noise, relatively low speed, as well as a more complex threading procedure than in horizontal shuttles.

— Vertical rotational. In a number of features, such shuttles are similar to swinging shuttles (see the corresponding paragraph): in particular, they are relatively simple to adjust the thread tension, but to thread the bobbin you must every time reach into the mechanism and remove the bobbin case from the shuttle. The key difference is that the shuttle does not swing during operation, but rotates. Because of this, such mechanisms are somewhat more complex and more expensive than swinging ones, but they provide higher sewing speeds with lower levels of vibration and noise....This option is used in professional and semi-professional machines, as well as industrial equipment.

— Horizontal rotational. Shuttles of this type are easy to use: to thread the bobbin thread, you do not need to remove the bobbin case; just open the cover and install the bobbin directly into the shuttle. In addition, the top cover is often made transparent, which allows you to monitor the remainder of the lower thread. Moreover, due to the rotational principle of operation, such a shuttle provides good speed and a minimum level of vibration and noise. Among the disadvantages of this option, one can note the difficulty in adjusting the thread tension: to do this, as a rule, you have to unscrew several bolts and remove the entire shuttle (whereas in vertical mechanisms the regulator is located on a quickly removable bobbin head). In addition, horizontal shuttles are not suitable for constant sewing with coarse threads - such a thread can rub a groove in the body, after which the mechanism will have to be changed.

The number of stitches that a sewing machine can sew. The larger this number, the more extensive the capabilities of this model, the wider the choice the user has; however, it wouldn’t hurt to clarify the specific range of supported stitches separately.

The fewest options - mostly up to 25 - are provided in electromechanical machines, as well as specialized devices such as overlockers and carpet lockers (see “Type”). In computer-controlled devices, the number of lines can be in the dozens, and some also allow you to download additional options from the computer.

The maximum stitch width provided by a sewing machine.

Most modern sewing machines are capable of working not only with the simplest longitudinal seam (when punctures with a needle occur strictly one after another), but also with seams that cover a certain width - for example, zigzag and various decorative ones. And in overlockers, such opportunities are generally available by definition.

The larger the maximum stitch width, the correspondingly wider the machine’s ability to work with specific types of seams (all other things being equal). An indicator of up to 5 mm is typical mainly for entry-level devices, 5 - 7 mm - average, 7 mm and more - advanced.

Distance from the working surface to the foot in the uppermost position. Must be taken into account when working with thick fabrics.

The maximum sewing speed provided by the sewing machine. In the vast majority of models, this parameter can be adjusted, so if necessary, you can sew at a lower speed.

The more stitches a machine makes per minute, the higher its productivity, the better suited it is for large volumes of work. At the same time, it is worth considering that high speed has a corresponding impact on price and energy consumption, and it is not always required. Detailed recommendations on choosing the optimal speed for certain types of work can be found in special sources.

The power consumed by the machine during operation. Usually, the maximum power value is indicated in the characteristics.

Most of the electricity supplied to the machine is consumed by the engine, so this indicator primarily describes the power of the engine. The higher this power, the faster the machine can work and the better it is suitable for working with dense fabrics. However, there is no strict dependence here, much also depends on the general specialization of the unit.

The ruler scale applied directly to the body of the sewing machine. This feature allows you to simplify and speed up some measurements in the process of work: attaching the measured segment to the body of the machine is often more convenient than looking for a ruler or centimetre tape.