Comparison Fury Avenger XL vs 1stPlayer WIN 101

The highest weight that the chair is guaranteed to withstand with regular use — in other words, the maximum weight of a seated person, allowing you to constantly use the product in normal mode without fear of unexpected breakdown. Note that many models are able to endure short-term excess weight without problems, however, anyway, it is not worth overloading the structure (and even more so doing it all the time): off-design loads will significantly increase its wear, and breakdown can occur at the most unexpected moment.

Chair back height; for models with a variable back height (see "Adjustments"), as a rule, the maximum value is indicated.

The back height is measured from the seat to the top edge. In essence, this is the height of support available to the back. In some situations, you can not pay much attention to this indicator - for example, if the chair is intended for visitors and the role of the back in it is purely symbolic. However, if you have to sit in a chair often and for a long time, this point should also be taken into account. Ideally, it's best to try a few chairs "live" and find out which backrest height is most comfortable for you. If this is not possible, it is worth deciding which area on the body the back should reach (to the shoulder blades, to the base of the neck, etc.) and measure at what height from the seat this area is in a sitting position. And if you need specific support for the back of the head, you should choose among models equipped with head restraints (see above).

The width of the back at the shoulders of the intended wearer.

In order to recline as much as possible on the back, this width should be no less than the actual width of the user's shoulders. At the same time, for more or less comfortable use, a smaller back size is also sufficient — approximately corresponding to the width of the back in the area of \u200b\u200bthe shoulders (between the outer edges of the shoulder blades). Well, anyway, this parameter is, on the one hand, secondary, and on the other, very subjective. This means that in most cases you can not pay much attention to it, however, if you have already decided to choose the furniture that is the most suitable in size, it is better not to measure your own back, but to test several chairs and determine the most convenient value by experience.

Dimensions of the seat installed in the chair in width and depth (from the back to the front edge). For models with variable depth (see "Adjustments"), the maximum value is taken into account when the seat is pushed forward to the stop.

Most modern chairs are designed for the average adult, so paying attention to size is primarily for people of a large, or, conversely, miniature physique. In width, the average is considered to be 45 – 55 cm, the narrowest models are up to 40 cm wide, in the widest it can exceed 60 cm. Similarly, a depth of less than 40 cm is considered small, up to 60 cm — medium, more than 60 cm — large.

Seat height from the floor. The optimal height for an average person is considered to be 40 – 50 cm, however, this is largely subjective, and the comfort of the chair for a specific user greatly depends on their preferences and physical characteristics. In light of this, many models offer the ability to adjust the height within a certain range (see "Adjustments"). For the best choice, it's best to "try out" in person to determine at what height you feel comfortable sitting and find a model with the corresponding features.

The presence of a headrest in the design of the chair.

The role of the headrest can be played as a stand, made separately from the backrest, and the upper part of the backrest — if it has a pronounced characteristic shape or a pillow is supplied in the kit, which can be installed at the request of the user. The simplest high backs that do not have a characteristic upper part are not considered head restraints.

Anyway, this feature provides additional comfort — especially when reclining back. On the other hand, if you have to sit mostly straight in the chair and the back plays a symbolic role, perhaps the best choice would be a model without a headrest(especially since such chairs are cheaper).

The ability to change the backrest tilt back and forth. Allows users to adjust the chair depending on how they prefer to sit: straight or slightly leaning back.

Armrest settings can be quite extensive. In everyday life, there is even a marking 1D, 2D, 3D, 4D, depending on the number of adjustments. The following adjustment options are available: height, length(forward / backward), width(right / left), tilt and swivel(right / left). More about them:

- Height. The ability to adjust the height of the armrests relative to the level of the seat. This feature allows you to adjust the arm rests for maximum comfort and minimize shoulder and neck fatigue.

- Turn (right / left). In this case, the possibility of turning the armrests to the right or left is implied, so that they are not parallel, but “look” in different directions.

— By length (forward / backward). Length adjustment refers to the ability to move the armrests back and forth for the convenience of placing hands under a certain physique of the user of a computer chair.

- By width (right / left). Adjusting the position of the armrests to the right or left in a horizontal plane. The stem adjustment contributes to a comfortable fit and allows you to adjust the chair to a certain arm span.

- By tilt. This adjustment assumes the presence of armrests mounted on swivel mounts. It can work as a height adjustment: turning the armrest in the mount changes not only i...ts inclination, but also the height of the point of contact with the arm. However, the matter is not limited to this: in many models, the handles can be placed vertically (raised or lowered) and, in fact, the armrests can be removed in this way.

If it is assumed that the position of the armrests can only be adjusted in height, they are marked with the designation 1D. For 2D armrests, in addition to the height adjustment, the ability to rotate the palm rests to the right / left (around the axis) is added. 3D armrests are adjustable in height, rotate around the axis and move back and forth. Finally, 4D armrests are considered the most functional - they additionally have the ability to shift the surface of the armrest to the side.

The material from which the seat of the chair is made. Note that certain models may be available in several options, differing by seat material.

— Fabric. Fabric can have many varieties, and specific characteristics depend on the chair's price category. This material is found in all categories — from budget models to quite expensive ones. Common properties of all fabric types are low cost, durability, and low maintenance requirements.

— Leather. The main distinguishing features of natural leather are its luxurious appearance and corresponding cost. In light of this, this material is considered "image-based" and is used not only for comfort but also to emphasize the owner's status. Accordingly, most chairs with leather seats are intended for executives (see "Purpose") and belong to the premium class. Practically, leather is durable and quite pleasant to the touch, but does not breathe well (which can cause discomfort in hot weather).

— Leatherette. A variety of synthetic materials imitating the natural leather described above. The quality and properties of a specific leatherette usually directly depend on its cost (and the chair's price category overall), but even the most expensive options usually cost less than leather — despite the fact that they can be virtually indistinguishable from it in appearance and feel. Additionally, this material is less demanding in terms of maint...enance. Thanks to this, leatherette seats are quite common. Their main disadvantages are the tendency to develop scuffs and generally a shorter lifespan than leather ones (again, much depends on the price).

— Plastic. Plastic seats are typical for the cheapest chairs, designed for visitors or staff who do not have to sit in one place for long. This material is characterized by low cost combined with durability, reliability, and a variety of colors. However, it has one key disadvantage that practically nullifies all the described benefits — hardness; simply put, sitting on plastic is uncomfortable. Because of this, even among the mentioned models, all-plastic seats are very rare.

— Wood. In the case of seats for office chairs, the word "wood" usually means plywood. This material is largely similar to the plastic described above, but it also has some differences: on one hand, it features an aesthetic appearance with original patterns and is considered more pleasant to the touch; on the other hand, it costs more and offers relatively few design options. Nevertheless, the disadvantage of hardness is also characteristic of this material, which is why it is also used only in isolated cases.

— Mesh. Seats in the form of a rigid frame with fabric or synthetic mesh stretched across it. The main advantages of such structures are their light weight and good breathability. The design of the mesh allows them to be used even in executive chairs. As for the noticeable disadvantages of mesh seats, they only have slightly lower reliability and greater repair complexity compared to similar fabric seats (see above).