Comparison Oclean Endurance vs Oclean X10

The number of power modes provided in the device. For flossing systems (see "Type"), this paragraph takes into account the characteristics of the irrigator; data on the toothbrush (if they differ) are indicated in the note.

It's important to distinguish between the number of power settings and the number of operating modes, as these are distinct parameters. Refer to the "Operating modes" section for details on the various modes. In this context, we emphasize that power adjustment, if available, may not be accessible in all modes. For example, in an irrigator offering two modes of operation—continuous jet and pulsation—power adjustment might only be available in the continuous jet mode.

Having multiple power settings enhances the versatility of the device. Even if a device technically offers only one operating mode, the ability to adjust the intensity of the treatment allows users to tailor the device for various tasks. For instance, in many toothbrushes, the traditional 2D brushing mode at its lowest power setting effectively serves as a gentle treatment option. However, it's worth noting that the capability to adjust power levels can somewhat increase the device's cost.

The number of brush modes provided by the device. The presence of several modes allows using the device for different procedures (for example, daily cleaning, delicate cleaning, whitening, etc.). Each such program has its own features of the working nozzle, as well as its own timer settings. The downside of such multifunctionality is the increased cost. In any case, this feature significantly expands the capabilities of the device; however, the specific set of modes may be different - it would not hurt to clarify it separately.

In this case, the mode means the general format of operation. For more information on the different formats, see "Modes" below. Note that this parameter should not be confused with the number of power settings. The latter is specified separately - see "Power modes", and in general, these characteristics are practically independent of each other. For example, a brush with one mode of operation can have several power settings. And vice versa, there may be only one power level, but several formats of operation.

Operating modes supported by the device.

Nowadays, toothbrushes offer the greatest variety of modes. In addition to traditional (so-called '2D') daily cleaning, they may include a 3D-mode, programs for sensitive and deep cleaning, polishing, whitening, gum massage, and tongue cleaning.

— Daily Cleaning (2D). The operating mode most similar to traditional (manual) toothbrushes. In this mode, the bristles move in a single plane; the trajectory can vary depending on the cleaning technology (see below). The intensity is usually medium/high, making this mode primarily for relatively healthy and not too sensitive teeth. The recommended time for daily cleaning is 2 minutes, 30 seconds for each quadrant of the mouth; relevant settings are typically provided in the timer (if available — see below). Generally, 2D cleaning is somewhat less effective than 3D (see below), but even the cheapest toothbrushes can offer this feature.

— Daily Cleaning (3D). A feature found in brushes with oscillating-rotating and sweeping technology. In these models, in addition to the primary cleaning technology, there is an up-and-down pulsation of bristles (more precisely, into the head and back). This allows cleaning in three planes, consid...erably improving efficiency compared to the 2D cleaning described above: the bristles not only process the outer tooth surface but also somewhat reach the sides and interdental spaces (although it is not a full replacement for using dental floss). The traditional downside of this feature is the relatively high cost.

— Sensitive Cleaning. A program for gentle treatment, mainly used for sensitive teeth and gums prone to bleeding. In brushes with oscillating-rotating and sweeping cleaning technology (see below), the sensitive mode usually involves reduced rotation/oscillation speed of the nozzle; in sonic and ultrasonic models, gentle treatment may be provided by decreasing the amplitude of oscillations. In any case, this mode minimizes discomfort during cleaning and the risk of gum damage — even with standard nozzles; for the most gentle effect, use this function with a sensitive teeth nozzle.

— Deep Cleaning. This name commonly refers to a cleaning with standard intensity, but extended duration — for instance, 3 minutes instead of the usual 2 minutes (45 seconds per quadrant of the mouth instead of the traditional 30 seconds). This mode allows for maximum effective tooth cleaning and removal of deposits insufficiently cleared by regular daily cleaning.

— Polishing. A mode for treating relatively clean teeth that do not require a full cleaning session. Usually, polishing is performed at a reduced frequency of oscillations (rotations) and takes significantly less time than regular treatment (e.g., 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for lightening tooth enamel and removing various stains, especially from the front teeth. It may be an extended version of the usual cleaning mode: for example, when whitening is enabled, the brush operates in a regular format for 2 minutes, then at increased intensity for 30 seconds. It's worth checking these specifics separately; also check contraindications for using this mode (especially for sensitive teeth and/or gum issues).

— Gum Massage. Gum treatment may be provided as a completely separate program or as an addition to the normal cleaning mode. This feature not only ensures effective cleaning but also strengthens the gums — useful for treating inflammation and bleeding, though it's best to consult with a doctor beforehand in such cases.

— Tongue Cleaning. A separate mode for cleaning the tongue. For many people, cleaning the tongue with an electric toothbrush causes a tickling sensation that's hard to endure for a long time. Therefore, this mode typically involves a brief duration of continuous treatment — around 20 seconds; several such 'sessions' can be made if necessary. It's also worth noting that having a tongue cleaning mode does not automatically mean a special attachment for such cleaning is included (see 'Attachments'), although such a tool is usually part of the set.

Note that in some toothbrushes, changing modes is done using 'smart' attachments: when such an attachment is installed, the device recognizes it via a built-in chip and automatically switches to the appropriate program.

The frequency of sound vibrations provided by a toothbrush with a sonic operating principle. This parameter also means the maximum pulsation frequency for toothbrushes with support for pulsating cleaning technology (see above) and for irrigators with a pulsed operating mode. For dental centers (see "Type"), data on the irrigator is usually specified here, and the pulsation frequency of the toothbrush (if this parameter is relevant for it) is indicated in a separate note

High frequency of movements and pulsations(from 40 thousand/min and higher) has a positive effect on the efficiency and quality of treatment, allowing you to quickly deal with dense plaque and even tartar. On the other hand, too intensive treatment can also be undesirable - for example, with high tooth sensitivity. All this is also relevant for irrigators - except that the operating frequencies in them are noticeably lower, such devices very rarely produce more than 2 thousand pulsations per minute. So when choosing, do not chase the maximum indicators of the frequency of movements and pulsations, but first of all it is important to take into account the individual characteristics of the user - for a full guarantee, it would not hurt to consult a dentist about this.

The presence of a pressure sensor in the device — a sensor that monitors the force with which the working nozzle is pressed against the teeth/gums.

This feature is primarily found in toothbrushes, including those that are part of flossing system units (as discussed in the "Type" section), but it can also be included in irrigators. Its primary function is to prevent potential harm to the teeth and gums caused by excessive pressure during brushing. The sensor's response can vary from one device to another; some devices emit a warning signal, while others reduce the bristle movement speed, and some may even shut off entirely in response to excessive pressure.

Having a pressure sensor in such devices can be beneficial not only for individuals with healthy teeth but also for those with heightened sensitivity or gum issues. It's a highly desirable feature for maintaining oral health. However, it's important to note that in many models, the pressure sensor is not integrated into the main body of the device but is instead part of the replaceable nozzle. Additionally, not all complete nozzle options may have this function, so it's essential to verify these details separately when choosing a device.

The presence of its own display in the design of the device.

These displays are typically small due to the compact size of the toothbrush or irrigator body. They usually offer basic functionality, capable of displaying one color and a limited set of characters. However, even with such constraints, they can convey various operational information, such as the selected mode, timer countdown, battery status, error messages, and more. As a result, these displays enhance overall convenience and visibility when using the device.

On the other hand, it's important to acknowledge that there's a growing number of models without displays, especially in the mid to high-end range. This shift is primarily driven by the widespread adoption of smartphone synchronization (as mentioned earlier), which offers several advantages over built-in screens. Firstly, the Bluetooth module required for synchronization is smaller and more cost-effective than a dedicated display. Secondly, smartphone screens and other control gadgets tend to be larger, more versatile, and easier to read compared to the small screens on toothbrush or irrigator handles. Additionally, the display on the device's handle is not visible during use, whereas a smartphone can be positioned in front of your eyes. As a result, it's worthwhile to seek out a model with this function if the ability to access data from a display is a crucial factor for you, regardless of whether you...have a smartphone or another additional device at hand.

This refers to the maximum duration a device can run continuously when powered by a fully charged battery or fresh batteries. It's worth noting that this metric may also apply to models designed for mains power, such as flossing systems that include rechargeable toothbrushes, in which case we're referring to the battery life of these toothbrushes.

It's important to note that device specifications typically indicate the maximum runtime under ideal conditions, often in the most energy-efficient mode of operation (and for models with replaceable batteries, using high-quality batteries). The actual battery life can vary depending on specific usage conditions. However, this parameter still serves as a valuable basis for comparing different models. Generally, differences in the claimed operating time correspond proportionally to the real differences in battery life. For example, if one toothbrush has a stated operating time of 20 minutes and another boasts 40 minutes, in practice, their battery life (under similar conditions) will likely differ by approximately two times.

It's important to consider that, for toothbrushes, this parameter can help estimate the number of brushing sessions you can expect on a single charge. Typically, the recommended daily brushing duration is 2 minutes. So, if a toothbrush has an operating time of 30 minutes, it's sufficient for approximately 15 cleaning sessions (or more realistically, around 14 or 13).

The time required to charge the battery from zero to 100% in a device with the appropriate power type (see above). This parameter can vary from 1 – 3 hours in relatively simple and low-power devices to a day in advanced models with capacious batteries. At the same time, the longer the maximum operating time on a charge (see above), the longer, usually, the time required for charging, although there is no hard dependence here.

In general, having fast charging capabilities improves the convenience of a device by reducing interruptions in its operation. However, there is a trade-off to consider: fast charging often means either a smaller battery capacity or a higher price due to the use of specialized technologies to speed up the charging process. When evaluating this parameter, it's essential to think about how you intend to use the device. For instance, if a toothbrush or irrigator is solely used at home by one person and comes with a charging stand, fast charging may not be a critical factor. The device remains consistently charged as it's constantly on the charger, and its battery doesn't deplete significantly during one use. The time between sessions, usually around 8 to 12 hours, is more than enough to maintain a charged battery, even for devices with slower charging. However, if you plan to use the device while traveling, where access to power outlets is sporadic, it's preferable to have minima...l charging time to ensure you can recharge quickly during your trips.

General dimensions of the device. Most manufacturers report this data only for stationary devices — irrigators of the appropriate variety and dental centers (see "Type") — because it is believed that toothbrushes (even with stands) are not so large as to be inconvenient, and not so varied in size, to pay attention to this difference.

Note that the dimensions are usually given only for the main unit, without taking into account the tools installed on it; however, the size of these instruments, again, it is not large enough to cause serious inconvenience.