Comparison Waterpik Aquarius Designer Series WP-676 vs Waterpik Aquarius Professional WP-660

General device type. In addition to classic toothbrushes (including those sold in the form of sets), nowadays you can find hygienic mouthwash devices — irrigators — as well as multifunctional flossing systems that combine the capabilities of a brush and an irrigator. Here are the features of each of these options:

— Toothbrush. These devices are designed for traditional toothbrushing using special bristles, essentially serving as electric versions of manual toothbrushes. While various models can differ significantly in terms of bristle movement (for more details, see "Cleaning Technology"), they share several common features. On the positive side, they are highly effective at cleaning the visible surfaces of teeth, surpassing irrigators in this regard. Some models are even capable of removing dense plaque and tartar with ease. Additionally, brushes are incredibly user-friendly and familiar to most people. However, they have limitations when it comes to cleaning the interdental spaces, even with specialized nozzles. To achieve the highest quality teeth cleaning, it's often necessary to use these devices in combination with an irrigator and/or dental floss. It's also worth noting that brushes with overly hard bristles or intense brushing can potentially damage the gums, particularly if they are already sensitive or inflamed. While the likelihood of such issues is re...latively low, it is higher compared to using irrigators.

— Set of toothbrushes 2 pcs. A set typically consists of two electric toothbrushes, which are often identical in terms of their characteristics (though exceptions exist). For detailed information about the toothbrushes themselves, please refer to the previous sections. Such a set can be particularly convenient for couples or households, and some options even offer brushes in "male" and "female" colors, like black and pink. Purchasing this set is not only more convenient than buying the brushes separately, but it is often more cost-effective as well, especially since there is usually only one charger included for the pair of brushes.
As for sets with unequal toothbrushes, they may include, for example, models with different types of nozzles, or an adult and a children's toothbrush.

— Irrigator. Irrigators are devices that clean the teeth and oral cavity by directing a high-pressure jet of water. This procedure effectively removes debris, food particles, and massages the gums, promoting gum health and preventing various oral issues. Irrigators can access areas where regular toothbrushes may struggle, making them suitable for cleaning braces and providing intense yet safe gum massages compared to bristle-based brushing. However, irrigators may not clean the visible surfaces of teeth as effectively as toothbrushes. Therefore, it's recommended to use an irrigator after regular brushing. Brushing can tackle more persistent dirt, while the water jet can address hard-to-reach spots that bristles might miss. Nevertheless, the spaces between teeth still require dental floss for thorough cleaning.
Separately, we note that irrigators can be both portable and stationary. The second type is more bulky and not suitable for travel, but stationary devices are equipped with capacious water tanks, have an almost unlimited operating time (thanks to mains power) and, usually, are more powerful than portable solutions.

— Flossing system. lossing systems are versatile devices that combine the functions of both toothbrushes and irrigators, as discussed in previous sections. This combination is particularly convenient because toothbrushes and irrigators have slightly different purposes, and having both can be beneficial. However, flossing systems come in various designs. Some models feature a universal handle that can switch between brushing and irrigating, depending on the nozzle used. Another common configuration is a rechargeable toothbrush paired with a stationary irrigator that also serves as a stand and charger. Alternatively, some sets include two separate devices, each with its own independent power source. Specific details about the flossing system's design should be checked separately.
In general, flossing systems are quite expensive, but most often they are still cheaper than separately purchased toothbrush and irrigator with similar characteristics.

The cleaning technology used by the toothbrush (see Type).

Nowadays, you can mainly find brushes with reciprocating-rotating, reciprocating-sweeping, and sonic cleaning technologies; the first two options can also be supplemented with pulsating technology. The main difference between these methods is the nature of the bristles' movement; here is a more detailed description of each option:

— Reciprocating-rotating. The traditional way of moving bristles in brushes with round heads. As the name suggests, such a head rotates back and forth at a small angle during operation. This technology is considered somewhat more advanced than reciprocating-sweeping — in particular, it provides better treatment of the interdental space and other similar places. True, such brushes are still not as effective as sonic ones — but they are also noticeably cheaper.

— Reciprocating-sweeping. Historically, this is the first technology used in brushes with oval attachments. The bristles in models with this operating principle oscillate left and right, like the twigs of a broom — hence the name. Classic reciprocating-sweeping brushes are simple in design, but not very effective. As a result, there are few such models these days, mostly budget devices, and most brushes with oval heads use more advanced sonic technology.

—...Pulsating. Usually this term refers to the operating format in which the bristles move up and down relative to the surface of the nozzle, in other words — they go deep into the head and extend back. This technology is almost never used in its pure form; it usually complements a reciprocating-rotating or reciprocating-sweeping head, providing the ability to 3D clean (see “Modes”). But if the 3D mode is not declared in the toothbrush, it is worth separately clarifying what is meant by pulsating technology. So, in some models we are actually talking about a whitening mode, when for maximum intensity of action the device does not work constantly, but in separate pulses; in others, the term “pulsating” actually refers to the sound mode of operation.

— Sonic. A cleaning technology that involves oscillating bristles with a small amplitude at a high frequency — up to 40 thousand oscillations per minute; this speed corresponds to the frequencies of audible sound, hence the name. This method of operation is considered more advanced than the reciprocating-rotating and especially the reciprocating-sweeping technology. Thus, due to the high speed of oscillations, sonic brushes create a fine homogeneous foam from paste, saliva and air during cleaning — this foam easily penetrates even hard-to-reach places; in addition, the vibration itself is effective in affecting plaque, including in the interdental space.

The number of brush modes provided by the device. The presence of several modes allows using the device for different procedures (for example, daily cleaning, delicate cleaning, whitening, etc.). Each such program has its own features of the working nozzle, as well as its own timer settings. The downside of such multifunctionality is the increased cost. In any case, this feature significantly expands the capabilities of the device; however, the specific set of modes may be different - it would not hurt to clarify it separately.

In this case, the mode means the general format of operation. For more information on the different formats, see "Modes" below. Note that this parameter should not be confused with the number of power settings. The latter is specified separately - see "Power modes", and in general, these characteristics are practically independent of each other. For example, a brush with one mode of operation can have several power settings. And vice versa, there may be only one power level, but several formats of operation.

Operating modes supported by the device.

Toothbrushes have the greatest variety of modes these days. In addition to the traditional (so-called "2D") daily cleaning, they can feature a 3D mode, delicate and deep cleaning programs, polishing, whitening, gum massage, and tongue cleaning. Irrigators, in turn, in addition to the standard format of operation with a continuous stream of water, most often provide a pulsation and/or spray mode.

Here is a detailed description of the most popular options found in brushes:

— Daily cleaning (2D). The operating mode is closest to traditional (manual) toothbrushes. In this mode, the bristles of the brush move in one plane; the trajectory of movement may vary, depending on the cleaning technology (see below). The intensity of action in this case is usually medium/high, so this operating format is intended mainly for relatively healthy and not too sensitive teeth. The recommended daily cleaning time is 2 minutes, 30 seconds for each quadrant of the oral cavity; the corresponding settings are usually provided in the timer (if available - see below). In general, 2D cleaning is somewhat less effective than 3D (see below), but this option can b...e provided even in the most inexpensive toothbrushes.

— Daily cleaning (3D). A function found in brushes with reciprocating-rotating and reciprocating-sweeping technology. In such models, in addition to the main cleaning technology, the bristles pulsate up and down (more precisely, into the head and back). Thanks to this, cleaning is carried out in three planes at once, which significantly improves efficiency compared to the 2D cleaning described above: the bristles not only treat the outer surface of the teeth, but also to a certain extent capture the sides and interdental space (although such cleaning is not a full-fledged replacement for the use of dental floss). The disadvantage of this function is traditional - relatively high cost.

— Gentle cleaning. A gentle cleaning program used mainly for sensitive teeth and gums prone to bleeding. In toothbrushes with reciprocating-rotating and reciprocating-sweeping cleaning technology (see below), the gentle mode most often provides for a reduced rotation/oscillation speed of the nozzle; in sonic and ultrasonic models, gentle cleaning can be ensured by reducing the amplitude of oscillations. In any case, this mode maximally eliminates discomfort during brushing and the likelihood of gum damage - even when using standard nozzles; and for the most gentle effect, it is best to use this function with a nozzle for sensitive teeth.

— Deep cleaning. Most often, this name refers to cleaning with standard intensity, but with an increased duration — for example, 3 minutes instead of the usual 2 minutes (45 seconds for each quadrant of the mouth instead of the traditional 30 seconds). This mode allows you to clean your teeth as effectively as possible and remove dirt for which regular daily cleaning is not enough.

— Polishing. A mode for treating relatively clean teeth that do not require full-scale cleaning. As a rule, polishing is performed at a reduced frequency of oscillations (rotations) and takes significantly less time than conventional treatment (for example, 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for whitening tooth enamel and removing various stains, primarily from the front teeth. It can be an extended version of the regular cleaning mode: for example, when turned on for whitening, the brush works in the regular format for 2 minutes, and then for 30 seconds in the high-intensity mode. These nuances should be clarified separately; it also does not hurt to clarify the contraindications for using this mode (especially with sensitive teeth and/or gum problems).

— Gum massage. Gum treatment can be provided as a completely separate program, or as an addition to the usual cleaning mode. This function provides not only effective cleaning, but also strengthening of the gums — it can be useful for treating inflammation and bleeding, although in such cases you should first consult a doctor.

When using irrigators, the gum massage effect is achieved by delivering a pulsating jet of variable intensity or by spraying a water-air mixture (a cloud of small droplets). For more information on these modes, see below.

— Tongue cleaning. A separate mode for cleaning the tongue. Many people find that cleaning their tongue with an electric toothbrush causes a tickling sensation that is difficult to tolerate for a long time. In light of this, this mode usually provides for a short duration of continuous treatment — about 20 seconds; if necessary, such “sessions” can be carried out several times. It is also worth mentioning that the presence of a tongue cleaning mode in itself does not mean that the kit includes a special attachment for such cleaning (see “Attachments”), although most often such a device is included in the kit.

It should be noted that in some toothbrushes, the mode change is carried out using “smart” attachments: when such an attachment is installed, the device recognizes it by the built-in chip and automatically switches to the appropriate program.

In turn, in irrigators the features of the main modes are as follows:

— Pulse. The pulse mode of the irrigator means the supply of cleaning fluid in the form of a pulsating stream. Such a flow effectively removes plaque and food debris, helps to thoroughly clean the space between the teeth, under the braces and periodontal canals (especially in hard-to-reach places).

— Jet (single-stream). Classic, most popular format of work: permanent jet with permanent pressure. Provides sufficient efficiency for most tasks for which irrigators are used, while being extremely easy to implement and can be provided even in the most inexpensive models.

— Pulsating. Water supply with variable pressure. This mode is especially effective for removing dirt from the interdental space, under braces and in other hard-to-reach places.

— Spray (atomizer). In this mode, a mixture of water and air is supplied through the nozzle, due to which, instead of a regular stream, a cloud of small drops flying at high speed is obtained at the outlet. This mode is great for gum massage and general cleaning of the oral cavity.

The pressure of the water supplied by the irrigator (see "Type") to the operating nozzle. Usually, this pressure can be adjusted within a certain range, since different situations and purposes require different processing intensity. The wider this range, the more versatile the device.

The lower limit of the pressure range in modern irrigators is around 30 kPa; similar values are set for procedures for sensitive teeth, for certain gum diseases and in other cases where the most gentle treatment is required. 400 – 500 kPa is considered an average level, and 600 – 650 kPa is considered high, such indicators allow for deep cleaning (see "Functions"). And higher values are rare, and they are used mainly when cleaning the tongue. However, it is best to consult with a dentist before purchasing an irrigator and choose a model for working pressure based on the recommendations received.

The length of the hose provided in the design of the irrigator or stationary type flossing system.

These devices typically consist of a main unit with a water tank and an irrigator handle connected to the unit through a hose. The hose's length typically falls within the range of 40 to 100 cm, and the convenience of using the device directly relates to this length. On one hand, a longer hose provides greater freedom of movement and reduces the risk of accidentally tipping over the main unit when moving the handle. On the other hand, an excessively long hose can become tangled under the arms and cause other inconveniences. When choosing based on this factor, it's important to consider the device's installation setup. For instance, if you plan to place the irrigator right next to the sink, an overly long hose may not be necessary. However, if you need to position the main unit at a considerable distance from the procedure area, a longer hose may be essential for optimal usage.

Additional items supplied with the device (in addition to the base and attachment set).

The most popular types of such items nowadays are charging stand, accessory stand, UV sanitizer and case ; Here is a more detailed description of each option:

— Charging stand. A battery charging device designed as a stand serves the dual purpose of recharging the battery and offering added convenience for storing the device. It's worth noting that this function can apply to dental centers, even if they primarily operate on mains power (as indicated in the "Type of power" section). In such cases, the toothbrush included with the dental center typically runs on batteries, and the charging stand is typically integrated directly into the main unit of the dental center for ease of use.

— Stand for accessories. A device designed to hold various accessories, primarily interchangeable nozzles, can come in different designs. For example, in toothbrushes and portable irrigators, this device is often integrated into a charging stand, which includes both a charging socket and open compartments for accessories. In irrigators and fixed-layout dental centers, these compartments are usually built into the main unit or the lid of the water tank. In this case, the compartments are typically covered with lids for hygiene reasons, making it...a more hygienic option. Regardless of the design, having a dedicated stand for accessories enhances the convenience of storing them.

— UV sanitizer. A device that uses ultraviolet (UV) radiation for disinfecting the device, particularly replaceable nozzles, is typically designed as a distinctive container. In some models, this container also serves as a cover or case. The disinfection process effectively eliminates the majority of pathogenic bacteria and viruses, all without the need for additional chemicals and ensuring safety as the radiation remains confined within the container. However, it's important to note that UV disinfection is not effective against regular dirt and debris, so having this function doesn't eliminate the need to clean the nozzle through washing.

— Case / cover. The device comes with a storage and carrying container, which can be either a hard case or a soft cover. Hard cases offer better protection, while soft covers are more compact and can be rolled up when not in use. Regardless, both of these accessories are highly convenient for storage and transportation. They safeguard the contents from dirt and damage, and in many cases, provide space to store additional accessories, reducing the risk of losing them. While you could use makeshift packaging for the same purpose, the provided container is typically more practical.

The cable length for connecting the device to the power source is an important consideration. It's worth noting that this specification may also apply to battery-powered models (as mentioned in the "Type of power" section), where it refers to the cable for connecting the charger stand or the device itself to a power outlet.

Typically, shorter cable lengths (up to 1 m) are common for battery-powered models that don't require a direct connection to the power source for operation. Some of these models don't even include charging stands and are intended to be charged outside the bathroom. In contrast, longer cables are primarily found in devices powered by mains electricity designed for stationary use. In these devices, the power cord can be nearly 2 meters in length. This design allows for the cord to be extended outside the bathroom if needed because not all bathrooms have electrical sockets, and using extension cords in such humid environments is generally discouraged.

General dimensions of the device. Most manufacturers report this data only for stationary devices — irrigators of the appropriate variety and dental centers (see "Type") — because it is believed that toothbrushes (even with stands) are not so large as to be inconvenient, and not so varied in size, to pay attention to this difference.

Note that the dimensions are usually given only for the main unit, without taking into account the tools installed on it; however, the size of these instruments, again, it is not large enough to cause serious inconvenience.