Comparison FIRST Austria FA-5126-9 vs Lund 68272
Add to comparison |  |  |
|---|---|---|
| FIRST Austria FA-5126-9 | Lund 68272 | |
| Outdated Product | Outdated Product | |
| TOP sellers | ||
| Type | dehydrator (horizontal dryer) | dehydrator (horizontal dryer) |
| Drying levels | 6 pcs | 6 pcs |
| Tray size | 275x250 mm | 325x300 mm |
| Tray height | 35 mm | 35 mm |
| Power consumption | 500 W | 500 W |
Specs | ||
| Thermostat |  | |
| Mesh for herbs and spices | 1 | 1 |
| Temperature range | 35 – 70 °C | 35 – 70 °C |
| Location of the fan (heater) | rear | rear |
| Control | touch controls | push-button |
| Shutdown timer | | |
| Overheat protection | | |
| Tray material | stainless steel | stainless steel |
| Cable length | 1.2 m | |
| Dimensions | 275x290x410 mm | 310x450x340 mm |
| Weight | 5.2 kg | |
| Added to E-Catalog | may 2023 | june 2022 |
Compare FIRST Austria FA-5126-9 and Lund 68272
You may be interested in
My comparisons
FIRST Austria FA-5126-9 often compared
Glossary
Tray size
Horizontal dimensions of one dryer tray.
For round models, this paragraph usually indicates the diameter (for example, “Ø250”), for other cases — the length and width. Anyway, the information about the size allows you to estimate the total area and, accordingly, the capacity of the device. At the same time, note that a larger size affects the dimensions and weight of the structure, and also requires more heating power (ceteris paribus).
For round models, this paragraph usually indicates the diameter (for example, “Ø250”), for other cases — the length and width. Anyway, the information about the size allows you to estimate the total area and, accordingly, the capacity of the device. At the same time, note that a larger size affects the dimensions and weight of the structure, and also requires more heating power (ceteris paribus).
Control
The control panel of a fruit dehydrators.
— Control knob. Mechanical control is carried out using rotary knobs and switches. Most parameters in such devices are set and controlled manually. In this case, the control elements are connected to the working parts of the dryer directly, without additional electronic circuits. This option is simple, reliable and low cost; however, it is only suitable for the most basic functions, but dehydrators for fruits, vegetables and mushrooms usually do not require more. But the obvious disadvantage of mechanical control is low accuracy: for example, a mechanical timer most often gives an error of a couple of minutes, which in some cases can be critical.
– Push-button. Push-button control is based on electronic circuits. Such systems are more accurate than mechanical ones (for example, the timer in such dryers can usually be set with an accuracy of several seconds), and more options and modes are provided. On the other hand, such control is more complex and more expensive than mechanical control.
– Touch. A type of electronic control with touch switches. Compared to push-button models, it provides a high level of comfort in operation, and looks more modern and aesthetically pleasing. Touch control is found mainly in top models of dehydrators.
— Control knob. Mechanical control is carried out using rotary knobs and switches. Most parameters in such devices are set and controlled manually. In this case, the control elements are connected to the working parts of the dryer directly, without additional electronic circuits. This option is simple, reliable and low cost; however, it is only suitable for the most basic functions, but dehydrators for fruits, vegetables and mushrooms usually do not require more. But the obvious disadvantage of mechanical control is low accuracy: for example, a mechanical timer most often gives an error of a couple of minutes, which in some cases can be critical.
– Push-button. Push-button control is based on electronic circuits. Such systems are more accurate than mechanical ones (for example, the timer in such dryers can usually be set with an accuracy of several seconds), and more options and modes are provided. On the other hand, such control is more complex and more expensive than mechanical control.
– Touch. A type of electronic control with touch switches. Compared to push-button models, it provides a high level of comfort in operation, and looks more modern and aesthetically pleasing. Touch control is found mainly in top models of dehydrators.