Comparison MSI Stealth 18 Mercedes AMG A1VHG [18 AI S A1VHG-061PL] vs MSI Stealth 18 AI Studio A1VHG [18 AI S A1VHG-008US]

The maximum brightness that a laptop screen can provide.

The brighter the ambient light, the brighter the laptop screen should be, otherwise the image on it may be difficult to read. And vice versa: in dim ambient light, high brightness is unnecessary — it greatly burdens the eyes (however, in this case, modern laptops provide brightness control). Thus, the higher this indicator, the more versatile the screen is, the wider the range of conditions in which it can be effectively used. The downside of these benefits is an increase in price and energy consumption.

As for specific values, many modern laptops have a brightness of 250 – 300 nt and even lower. This is quite enough for working under artificial lighting of medium intensity, but in bright natural light, visibility may already be a problem. For use in sunny weather (especially outdoors), it is desirable to have a brightness margin of at least 300 – 350 nt. And in the most advanced models, this parameter can be 350 – 400 nt and even more.

The contrast of the screen installed in the laptop.

Contrast is the largest difference in brightness between the lightest white and darkest black that can be achieved on a single screen. It is written as a fraction, for example, 560:1; while the larger the first number, the higher the contrast, the more advanced the screen is and the better the image quality can be achieved on it. This is especially noticeable with large differences in brightness within a single frame: with low contrast, individual details located in the darkest or brightest parts of the picture may be lost, increasing the contrast allows you to eliminate this phenomenon to a certain extent. The flip side of these benefits is an increase in cost.

Separately, we emphasize that in this case only static contrast is indicated — the difference provided within one frame in normal operation, at constant brightness and without the use of special technologies. For advertising purposes, some manufacturers may also provide data on the so-called dynamic contrast — it can be measured in very impressive numbers (seven-digit or more). However, you should focus primarily on static contrast — this is the basic characteristic of any display.

As for specific values, even in the most advanced screens, this indicator does not exceed 2000: 1. But in general, modern laptops have a rather low contrast ratio — it is assumed that for tasks that require more advanced image characteristics, it is more...reasonable to use an external screen (monitor or TV).

The amount of heat generated by the graphics processing unit (GPU) during normal operation. TDP is expressed in watts. It allows you to evaluate the thermal characteristics of a laptop and determine its potential for working with high graphics loads. The higher the GPU TDP value, the more power the GPU consumes, which may require a more efficient cooling system to avoid overheating and ensure stable operation of the device. Laptops with higher GPU heat dissipation are better suited for gamers or graphics and video production professionals.

The capacity of the drive installed in the laptop. If there are several separate drives (for example, HDD + SSD, see "Drive type") — this item indicates the volume of the most capacious drive (in our example — HDD).

A larger drive allows you to store more data, but it also comes at a higher cost. At the same time, it is worth remembering that the price also depends on the type of media: for example, SSDs are much more expensive than hard drives of the same volume. So it is best to directly compare drives of the same type with each other. As for specific volumes, the most modest figures are typical for configurations with pure solid-state memory — SSD of one type or another or eMMC (see "Drive type"): among them you can find solutions for 240 – 360 GB or less . Hard drive capacity actually starts at 480 – 512 GB ; 1TB storage capacity is average, and the most capacious modern laptops are equipped with storage of 2TB or even more.

The size of the M.2 SSD module (see "Drive Type") installed in the laptop. Specified in the format "width x length".

This parameter primarily allows you to evaluate the amount of space allocated for the drive, and the possibility of replacing it with a module of a different size. It is worth noting here that the M.2 standard itself allows several options for length and width, but boards with a width of 22 mm are most widely used. The length of such a board usually corresponds to one of the standard options: 30 mm, 42 mm, 60 mm, 80 mm and 110 mm.

In general, the installation of a shorter module of the same width (for example, 22x42 mm instead of 22x60 mm) does not cause problems, but the possibility of using larger components should be clarified separately — not every case allows the installation of M.2 drives with a larger one than the standard module , length. As for specific dimensions, the most common in modern laptops is M.2 22x80 mm SSDs: this size is guaranteed to allow you to change the “native” drive to almost any 22 mm standard module (except for the largest, 22x110 mm — and even for them there can be a place ). There are also smaller sizes — 22x60 mm, 22x42 mm and even 22x30 mm — but much less frequently. And here it is worth saying that the shorter the length of the SSD module, the smaller its capacity, usually.

Note that modern laptops also use M.2 modules of a different width — usually 16 mm with a length of 20 mm (16x20 mm). H...owever, this is a very rare option.

The size of an additional slot for a drive (or other peripherals) with an M.2 interface provided in a laptop.

We emphasize that in this case we are not talking about the actually installed drive, but about the size of the bay (recall, there is no drive in it initially — for more details, see "Additional M.2 connector"). Knowing this size, you can estimate the maximum dimensions of the SSD module (or other component) that can fit in this bay. It is worth noting here that the most widespread nowadays are M.2 boards with a width of 22 mm, slots in laptops are usually made for this standard width. Therefore, the main indicator that determines size compatibility is length.

For bays on laptop motherboards, the length is most often 80 mm (marking 22x80 mm). This allows you to install 22 mm M.2 boards with a length of 80 mm, 60 mm, 42 mm and 30 mm — that is, all types of such boards, except for the largest, at 110 mm. The latter, however, is not a disadvantage, since 110-mm components are rarely used in laptops. If there are several additional (free) M.2 slots and they differ in size, these data are also specified in this paragraph, for example, “22x80 / 22x42 mm”.

Backlight sync technology supported by the laptop.

For lighting in general, see above; here we recall that we are talking about a laptop keyboard. And synchronization allows you to "coordinate" the operation of this system with the illumination of other components connected to the laptop — a mouse, keyboard, speakers, etc. Thanks to this, you can simultaneously turn on and off the backlight, change the brightness, create various effects, etc. Separately, it is It should be noted that synchronization is used mainly in RGB systems, which can also change the hue of the glow — this provides even more extensive possibilities. However, proper backlight matching requires all components to support the same timing technology; This item just allows you to evaluate such compatibility. At the same time, each manufacturer, usually, creates its own technology — for example, Asus has Aura Sync, MSI has Mystic Light Sync, etc. So the easiest way to achieve compatibility is to buy components of the same brand for a laptop.

The capacity of the included laptop battery in milliamp-hours (mAh).

Higher capacity allows the laptop to work longer on a charge, all other things being equal. However, keep in mind that the actual battery life will depend not only on the battery, but also on the power consumption of the laptop itself — and it is determined by both the hardware platform and the installed software. Therefore, only models with similar characteristics can be compared with each other according to this indicator. And if you need a “long-playing” laptop or laptop with very good battery life, you should choose it not by battery capacity, but by directly stated operating time.

Regarding milliamp hours, it is also worth noting that this is not a very reliable (although the most popular) unit of capacity: the actual amount of energy stored in a battery depends not only on milliamp hours, but also on the operating voltage. A more correct unit in this sense is watt-hours, for details on them, see p. "Battery capacity" below. As for specific numbers, the most modest models in this regard are equipped with batteries of 3000 – 4000 mAh and even less. 4000 – 5000 mAh can be called an average, 5000 – 6000 mAh is above average, and the most capacious laptop batteries can hold 6000 -7000 mAh or more.

Rated voltage of the battery supplied with the laptop.

In fact, most users do not need to pay special attention to this parameter. The battery is selected by the manufacturer in such a way as to ensure the battery life and power efficiency planned for this model, so when choosing, it makes sense to look at more "close to life" indicators — first of all, the maximum operating time. Voltage data is needed mainly in specific cases — for example, when looking for a spare battery or transferring capacity from one unit to another (for more details, see "Battery Capacity").