Comparison 3F Ul Gear Floating Cloud 2 15D vs Hannah Hawk 2

The total weight of the tent is including the frame and other accessories.

This parameter depends primarily on the purpose (see above), and after that — on seasonality, capacity, and additional functions. For example, in trekking and expedition models, the weight usually does not exceed 5 – 7.5 kg, and the lightest of these products can weigh 2 – 3 kg or even less, while being full-fledged tents for 2 people or even more. However, for a trekking tent, such a small weight with a capacity of more than 2 people usually means that this model is designed exclusively for the summer. For most camping tents, the weight starts at 6 kg, although among them there are also quite light products — by 4 – 5 kg, 3 – 4 kg, or even less (in such cases, light weight can also mean a purely summer specialization). And the most capacious and/or multifunctional models can have a weight of 10 – 15 kg, 15 – 20 kg and even more; in this weight category, you can mainly find tents, camping tents for many people and fishing tents for carp fishing (see "Destination").

When choosing a tent according to this indicator, it is worth considering that it does not always make sense to chase the maximum weight reduction. Yes, the...light tent is the most convenient to carry; on the other hand, weight reduction inevitably affects one or several other characteristics at once. So, most often, lighter models are either more expensive or smaller in size and less roomy and functional than their heavier counterparts. And sometimes weight reduction also negatively affects the security (including moisture resistance) and the overall reliability of the product. Therefore, it makes sense to specifically look for the lightest tent possible in cases where weight reduction is of key importance; a typical example is long trips, in which all the equipment has to be carried “on oneself” for a long time. And even in such cases, it is worth remembering other important characteristics. For example, for use in late autumn, when frosts are likely, it is better to choose a heavier tent with winter seasonality than a light model that is not designed for winter conditions.

The vestibule is a kind of "entrance hall" in front of the entrance to the main compartment (s) of the tent.

The specific design and purpose of such a "hallway" may be different. So, in small two-layer tents, the space between the inner and outer layers in front of the entrance plays the role of a vestibule (for this, the outer canopy is stretched at a greater angle relative to the vertical than the inner one). The dimensions of such a compartment are small, it is designed mainly for storing individual items, such as shoes. In larger models, the vestibule is made in the form of a full-fledged compartment, which differs from the main compartment only in the absence of a bottom (although there are exceptions). Such a compartment can be located between two sleeping compartments; and in some tents two vestibules are provided at once.

Anyway, such equipment increases the useful area of \u200b\u200bthe tent and provides additional comfort when using it. Tambour can be used to store equipment, often quite bulky; with an open entrance, it provides additional protection for the main volume of the tent from rain, sun and wind; and in a large vestibule(150 cm long or more), you can even organize additional sleeping places (if the weather permits) or even an auxiliary room such as a kitchen, dining room, administrative area, etc. " below.

The length of the vestibule provided in the tent.

See above for more details on the vestibule. As for its dimensions, the length of the vestibule is measured along the same side along which the length of the entire tent is measured; and the width of this compartment usually corresponds to the overall width of the tent, and it does not need to be specified separately in the specifications. At the same time, we note that due to such measurement rules, the length of the vestibule is often less than its width; this is quite normal in this case.

The specific ratio between the dimensions of this compartment in different tents may be different. However, in general, a longer vestibule is usually larger and more capacious than a shorter one. When choosing, it should be taken into account that a large and spacious additional compartment increases overall comfort, but it significantly affects the price and weight of the tent (not to mention its overall dimensions). So when choosing for this parameter, it is worth considering the real conditions and features of the operation of the tent. We only note that in order to organize additional beds, it is worth paying attention to vestibules with a length of at least 150 cm — usually, they can accommodate additional places at least across, and often along the tent.

Models with this feature actually consist of two tents, one located inside the other. The outer tent is usually made of dense waterproof material, while the inner tent is made of lightweight, moisture-wicking fabric. This design provides good thermal insulation and protection from moisture, including condensation: most of it settles on the outer tent, preventing it from penetrating inside. Many two-layer tents allow for the separate setup of only the inner tent, which can be useful in warm weather. The downside of this option is the increased size and weight compared to single-layer tents.

— Inner tent with mesh. An option of two-layer tents with an inner mesh tent. Essentially, this mesh protects the main tent space from mosquitoes and other insects, and when set up without the outer tent, you can enjoy the view of the starry sky in warm, clear weather.

The number of separate sleeping quarters provided in the design of the tent. Note that for models with 1 bedroom, this parameter in our catalog may not be specified at all, but with a larger number of bedrooms, it must be indicated.

In this case, only the main compartments, originally intended for overnight stays and best isolated from the environment, are considered sleeping quarters. Vestibules (see above) are not taken into account in the calculation, even if the size of the vestibule allows organizing an additional bed (s) in it.

Most modern tents have one sleeping area — this allows you to minimize the size and weight, and in most cases does not cause any particular inconvenience. However, there are models that have more "bedrooms"; in some cases, it can reach 4. At the same time, we emphasize that we can talk about separate sleeping areas only when each such zone is separated from the others by a vestibule or at least a solid non-removable wall. But a removable partition (see "Bedroom with a partition") in this case does not turn one sleeping compartment into two (although it does provide some degree of insulation).

Anyway, having several sleeping areas will be useful if people living in a tent need to be separated for one reason or another. For example, inside you can separate the "male" and "female" parts, in order to avoid ambiguous situations — or vice versa, provide married couples with their own...sleeping quarters. There are other options for using tents for more than 1 bedroom — for example, one compartment can be allocated for storage for bulky equipment, or a first-aid post with a separate closed room for examinations and manipulations can be organized.

This item refers to the total number of entrances to the tent. In most cases, their number also describes the possibility of entering the sleeping area. However, there are models with a large vestibule, in which the input is provided from different sides. Such abundant entry/exit options allow you to use the tent in various situations. For example, focusing on the position of the sun, it will be relevant to open the western or eastern side; landscape conditions will not interfere with the installation of the tent, since one of the exits will remain accessible in any case. Well, for a large company at a campsite, vacationers will not interfere with each other.

The number of bedroom entrances provided in tent design.

It is worth clarifying that if there are several bedrooms in the structure (see "Sleeping areas"), then in this case it is not the total number of entrances that is taken into account, but the number of entrances per bedroom. For example, if the tent has 2 sleeping areas, each with 1 input, then the characteristics will indicate 1 input to the bedroom.

In other words, if the design states 2 entrances to the bedroom, this means that each bedroom has two exits (regardless of the total number of bedrooms). Such a design is convenient primarily because you can leave the sleeping slot in the most convenient way, if necessary, without disturbing your sleeping neighbors. On the other hand, a design with one input provides a higher degree of thermal and moisture insulation; such tents are better suited for particularly unfavorable conditions.

The arcs are connected using a connector (hub). Most often, there is only one, but there are variations when arc-stands are attached to the "main" arc. The hub structure (HUB) unites the entire tent frame into one whole, makes the tent more reliable and stable, simplifies the installation of the structure, and increases the accuracy of the geometry of the installed tent. It is impossible to put up a tent with a HUB structure crookedly, even if you deliberately try to mount the structure poorly. The main idea of hubs is to mount the arcs and guides as vertically as possible. In this case, the tent becomes extremely roomy.

The number of poles provided in the frame of the tent. For hemispherical types (see "Shape") for 2-3 people, not intended for extreme conditions, 2 poles are considered quite sufficient; larger and/or reinforced models may have more poles. In the case of half-barrels, this amount is directly related to the length of the tent.