Comparison Alpine MRV-M500 vs Alpine MRV-M250

Clear Table
Add to comparison
	Alpine MRV-M500	Alpine MRV-M250
	$159.00 Compare prices 1	from $234.47 Outdated Product
all specs only differences
TOP sellers	Amazon.com $159.00 Buy in shop	Find prices on Amazon.com Find prices on eBay.com
Class	D	D
Number of channels	1 /mono/	1 /mono/
Specs
Channel power (@2-ohms)	500 W	250 W
Channel power (@4-ohms)	300 W	150 W
Resistance adjustment
Max. power	1100 W	550 W
Max. impedance	4 Ohm	4 Ohm
Frequency range	7 – 400 Hz	7 – 400 Hz
Signal-to-noise ratio	105 dB	105 dB
Functions	high voltage input /4 channel/ Bass Boost function low pass filter (LPF)	high voltage input /4 channel/ Bass Boost function low pass filter (LPF)
General
Backlight
Dimensions	200x200x55 mm	190x200x55 mm
Weight	1.8 kg	1.5 kg
Added to E-Catalog	november 2013	november 2013

Channel power (@2-ohms)

Rated power output by the amplifier per channel when a load (speakers) is connected to it with a nominal impedance of 2 ohms. For details, see "Nom. channel power (at 1 Ohm)”.

Channel power (@4-ohms)

Rated power output by the amplifier per channel when a load (speakers) with a nominal impedance of 4 ohms is connected to it. For details, see "Nom. channel power (at 1 Ohm)”.

Max. power

The highest output power provided by the amplifier. It is worth noting that this indicator is not standardized, and different manufacturers may mean different values \u200b\u200bfor it — for example, the highest power of short-term, in a fraction of a second, peaks (power surges), the highest power that the amplifier can transfer for several seconds, or even the power at which the device will fail. Therefore, it makes no sense to compare different models with each other in terms of maximum power. But when choosing acoustics for an amplifier (or vice versa), this parameter can be very useful: it is desirable that the maximum power of the speaker be at least twice as high as that of the amplifier. This will reduce the risk that a power surge will damage the speakers.