Comparison Ugreen SC200 200 W vs Fossibot SP200 200 W
Add to comparison |  |  |
|---|---|---|
| Ugreen SC200 200 W | Fossibot SP200 200 W | |
| Outdated Product | Compare prices 1 | |
| TOP sellers | ||
XT60 connector. Optimal sun ray angle indicator | ||
| Features | portable | portable |
| Type | monocrystalline | monocrystalline |
Specs (STC) | ||
| STC Power (Pmax) | 200 W | 200 W |
| Nominal voltage (Vmp) | 19 В | 18 В |
| Nominal power (Imp) | 10.5 А | 11.1 А |
| Open-circuit voltage (Voc) | 23 В | 21.6 В |
| Short circuit current (Isc) | 11 А | 13.3 А |
| Efficiency | 23 % | 23.4 % |
Features | ||
| MC4 connector |  |  |
| Folding design | | |
| Support foot | | |
| Suspension system | | |
| Waterproof | IP67 | IP67 |
| Operating temperature | -10 °C ~ +60 °C | -10 °C ~ +65 °C |
General | ||
| Dimensions | 2380x540x41 mm | 2400x640 mm |
| Folded size | 640x540x70 mm | 640x531 mm |
| Weight | 8.4 kg | 8 kg |
| In box | cables (XT60–XT60, MC4–XT60) | cable |
| Added to E-Catalog | november 2023 | august 2023 |
Compare Ugreen SC200 and Fossibot SP200
Price comparison
You may be interested in
My comparisons
Ugreen SC200 often compared
Glossary
Specs (STC)
Standard Test Conditions (STC) are standard test conditions that reflect the operation of a solar panel under ideal conditions. As part of the tests, the weather of a clear sunny day with an air temperature of +25 °C, no wind, solar intensity of 1000 W/m² and an emission spectrum relative to air mass of 1.5 is simulated. The surface of the solar cell must be placed strictly perpendicular to the rays from the celestial body. Note that in real operation of the solar panel, such conditions are extremely rare. However, in general, the characteristics of the STC allow us to evaluate the "passport" parameters of the energy storage device.
Nominal voltage (Vmp)
The voltage reading on the voltmeter during a solar panel test at the nominal power level according to the STC method. This parameter, Vmp, stands for Voltage at Maximum Power and is measured in volts. It helps determine which type of batteries the panel is designed for — either 12 V or 24V.
Nominal power (Imp)
Ammeter reading during solar panel testing under STC conditions. The value of the rated current Imp (Current at Maximum Power) is measured in amperes.
Open-circuit voltage (Voc)
The voltage generated by the solar battery in idle mode, that is, without connecting the load. Behind the abbreviation Voc stands for Voltage Open Circuit.
Short circuit current (Isc)
The current value under the condition of zero voltage (Short Circuit Current).
Efficiency
Percentage of the maximum solar panel power to the incident radiation power produced. The efficiency parameter allows you to determine how efficiently the panel PV module converts solar energy into direct electric current.
MC4 connector
MC4 connectors are used for connecting solar panels to each other and for crimping the ends of power cables. Such connectors have a sealed waterproof design, suitable for outdoor use. MC4 connectors are available in female and male versions. They provide long-term stability of solar panels and resistance to climatic influences.
Operating temperature
The temperature range in which the solar module functions normally. Exceeding the specified norms in any of the directions leads to a decrease in the productivity of energy generation, accelerated degradation of the panel, and the appearance of microcracks on its surface. For most solar panels, the operating temperature range is -40°C to +85°C.
Dimensions
Dimensions of the solar panel in unfolded form.