Comparison Cyclone MP-1024 BA vs Prology CMX-240

Tape recorders with a shortened body.

In this case, shortened means a case that has a shallower depth than classic radio tape recorders equipped with CD drives. Due to this, such models are quite compact, which, in particular, simplifies installation and facilitates wiring. Of course, CD / DVD discs are not supported in principle by such radio tape recorders, but this is not a serious drawback — nowadays there are quite enough alternatives to such media. Also note that the shortened layout does not affect the mounting size (see above) — it can be 1 DIN or 2 DIN, and standard solutions are even larger.

The maximum size of the memory card or USB stick (see "Media type") that the radio can work with normally.

High-capacity drives require fairly high processing power and may use special technologies that are not supported by all radios. This is the reason for the limitation on the volume of supported media.

The number of bands in the radio equalizer.

In this case, the band means a separate part of the frequency range, the volume of which can be adjusted using the equalizer independently of the other parts. The more bands the equalizer has, the more accurately it allows you to adjust the overall sound of the car radio acoustics. However, note that multi-band equalizers are quite difficult to set up, therefore they are recommended primarily for experienced users.

The number of fixed settings (presets) provided in the car radio equalizer.

The presence of such settings can greatly simplify the adjustment: choosing the right preset is easier than manually adjusting each EQ band. At the same time, presets are often selected by the manufacturer for certain genres of music and have the appropriate names — "Rock", "Pop", "Jazz", etc.; this simplifies the task even more. And the more fixed settings in the device, the wider the choice of the user. In some radio tape recorders, in addition to pre-flashed ones, user presets are also provided — they can be programmed in advance and turned on in the same way as the preset ones.

The rated sound power produced by the radio amplifier for each audio channel.

Nominal is the highest average (rms) sound power at which the amplifier operates without overload and is able to operate for an unlimited time. This is the main indicator characterizing the overall sound volume of the radio; individual power surges can be much higher than the nominal value, but they are short-lived; here we are talking about a constant signal level. In addition, compatibility with specific speakers depends on this indicator: the rated power of the speaker system must be no lower than that of the amplifier, otherwise the speakers may be damaged at high volumes. However, the spread is not so great; there are radios with an output power of 40 W, 45 W, 50 W, 55 W, 60 W and more.

Optimal amplifier power settings depend on a number of factors, ranging from the number of channels to the personal preferences of listeners. Detailed information on this topic can be found in special sources; In short, we can say that the higher the power per channel, the louder the sound the radio can produce.

The number of line outputs (see above) provided in the design of the radio. It should be noted that usually these outputs use RCA connectors (“tulip”), and the analog format allows only one audio channel to be transmitted through one such. Therefore, to work with a stereo signal, two RCA connectors are required, and just a pair of such jacks is considered to be one line output - a set designed for one set of stereo speakers. The main difference between this interface and the same RCA used to connect speakers (see above) is that the line output receives a signal from a preamplifier that is unsuitable for feeding to passive acoustics. Such a signal must be sent to active speakers or an external amplifier (whereas the speaker is connected to the output of a power amplifier designed for passive speakers).

The function of accelerated charging of external devices - for example, smartphones - from the USB port of the radio. The general principle of this procedure is that increased power is supplied to the gadget; but its specific features may be different. For example, some models provide a separate USB port intended only for fast charging, while others use the same connector to which flash drives are connected. In addition, the radio may support special fast charging technologies; they speed up the process even more, but only work with compatible devices; for other gadgets, accelerated charging may not be available at all. It doesn’t hurt to clarify all these nuances before purchasing.