USA
Catalog   /   Automotive   /   Car Audio   /   Car Speakers

Comparison JBL Stage1 61F vs JBL Stage1 41F

Add to comparison
JBL Stage1 61F
JBL Stage1 41F
JBL Stage1 61FJBL Stage1 41F
Outdated ProductOutdated Product
TOP sellers
Application areacarcar
Typecoaxialcoaxial
Size6.5" (16.5 cm)4" (10 cm)
Number of bands22
Specs
Max. power200 W125 W
Frequency range55 – 20000 Hz75 – 20000 Hz
Impedance4 Ohm4 Ohm
Sensitivity91 dB90 dB
Added to E-Catalogjuly 2022july 2022
Glossary

Size

The size of the speakers of the acoustic system; in speakers with different driver sizes (component and coaxial, see "Type"), the size is determined by the diameter of the largest (woofer) driver. The size of the speaker determines primarily its ability to work with low frequencies. It is believed that acoustics up to 4 "is practically not suitable for low frequencies (regardless of the frequency range), 5-6" refers to the average level, and speakers of 6" or more even allow you to do without a subwoofer. Also, the size affects the installation options. So , some cars may provide seats for acoustics of a certain size — this limits the choice.And for large acoustics, there may not always be a place in cars with cramped interiors.

Max. power

The maximum power of a short-term (up to several seconds) incoming signal that the speaker can withstand without physical damage. Just like the nominal power, it matters for the selection of acoustics for an amplifier (or vice versa): it is believed that the maximum power of the speakers should be at least 2 times higher than the maximum power of the signal source.

Frequency range

The total audio frequency range reproduced by all speaker speakers.

Obviously, this range should not be too narrow, so that the acoustics do not cut off the lower and/or upper frequency limits of the reproduced sound. At the same time, the human ear perceives sound within 16 Hz - 22 kHz, and it simply does not make sense to provide speakers with a wider frequency range. We also recall that in mid-frequency acoustics and tweeters, reproducible frequencies are limited due to specialization (for more details, see "Type"). And the overall sound quality will depend not only on this indicator, but also on a number of other features.

Sensitivity

This parameter determines the volume of the sound of a particular speaker when a certain standard signal is fed to it. Typically, this is considered a 1 W signal with a frequency of 1000 Hz. The higher the sensitivity, the less the speaker is demanding on the power of the amplifier. So, it is believed that for acoustics connected directly to the car radio, the sensitivity should be 80 dB or more; for less sensitive systems it is recommended to use a separate amplifier.
JBL Stage1 61F often compared
JBL Stage1 41F often compared