Comparison MPM MPZ-01 vs Gorenje VS120W

The length of the welding slat for sealing bags provided in the vacuum sealer. In fact, this is the maximum seam length that the device can create; the size of the open side of the package should not exceed this length, otherwise it will not be possible to vacuum and seal the package normally. If bags in rolls are used for packaging, the length of the welding slat corresponds to the maximum width of the roll. And powerful industrial models have large slats on which several packages can be placed at once.

Rated power consumption of the device. Usually, the characteristics indicate the average power in normal operation; peak values can be much higher, but this mode does not last long.

On the one hand, the efficiency and speed of vacuuming directly depend on the power consumption, on the other hand, the consumption of electricity. And heavy high consumption industrial-grade devices may require a three-phase connection (see "Power supply").

Programs integrated into a vacuum sealer. The functionality of the device depends on their quantity. However, it's important to clearly understand the purpose of your device, as there's no need to overpay for unused modes. According to the general principle of the device's operation (vacuum pumping), all devices have a basic program. It is intended for dry products. This program is ideal for storing cereals, nuts, dried fruits, pasta, tea, coffee, spices, and other loose or solid products. Operating in this mode allows you to extend the storage period without the risk of oxidation, preserving the aroma and crispness of the products without excess moisture in the packaging. More specific modes are described below: — Moist (moisture-containing products). A program for packing moderately moist products, such as marinated meat, fresh fruits, raw vegetables with juice, or ready-to-cook foods. This mode creates an almost full vacuum, but with slight adjustment to the pumping speed to avoid moisture being drawn into the pump. This is the optimal choice when the product contains a small amount of liquid but is not swimming in it.

— Liquid (liquid products). This program is very similar to the one described above but is intended for packaging very juicy or liquid products, such as soups, sauces, stews. In this mode, the vacuum sealer operates even more carefully: the vacuum is minimal or controlled inte...rmittently to avoid active suction of liquid. It is often accompanied by immediate sealing without achieving a full vacuum.

— Canister (vacuum sealing containers). The ability to use the device for sucking air from containers with special valves. It is practically obligatory for manual sealers (see "Purpose"), but can also be found in other types — typically, a special hose is used, attached to the container.

— Marinate. This mode is designed for accelerated marinating of products under vacuum. Unlike the regular vacuuming mode, the Marinate program often operates in a cyclic mode: the vacuum is created, then briefly released, and the process repeats several times. This simulates the "breathing" of the product and significantly speeds up marinating — a process that usually takes several hours can be reduced to 15–30 minutes. The Marinate mode is especially useful before grilling, roasting, or frying, allowing dishes to quickly gain a rich taste without long waiting times. This mode most often uses a special vacuum container rather than regular bags.

Special bags designed for single-use vacuum packaging of products. They are made from a multi-layer material, usually a combination of polyethylene and nylon, and come in various sizes (e.g., 15×20 cm, 20×30 cm, 25×35 cm, etc.). Disposable bags are suitable for packaging meat, fish, vegetables, fruits, bulk products, and prepared meals. Once sealed, the bag cannot be reused for vacuuming, as resealing compromises its airtightness and may lead to air leakage.

Control panel device of the vacuum sealer.

— Button-based. A classic control system of the vacuum sealer using physical buttons on the body. This solution is considered reliable and intuitively understandable, especially for users who prefer simplicity and tactile feedback. Each function (vacuuming, sealing, stopping, etc.) has a separate button, which simplifies operation and reduces the likelihood of errors.

— Touch-based. A modern format for controlling the vacuum sealer using a touch-sensitive panel. Instead of physical buttons, flat touch zones with backlight or pictograms are used. This interface makes the device more stylish, easy to clean, and modern in appearance.