USA
Catalog   /   Home & Renovation   /   Security Systems   /   DVR & NVR Recorders

Comparison Hikvision DS-7616NXI-K2 vs Hikvision DS-7732NI-K4

Add to comparison
Hikvision DS-7616NXI-K2
Hikvision DS-7732NI-K4
Hikvision DS-7616NXI-K2Hikvision DS-7732NI-K4
Outdated ProductOutdated Product
TOP sellers
Main
Bandwidth 160 Mbps. Perimeter protection.
Typedigital NVRdigital NVR
Camera connection16 channels32 channels
Features
Features
 
motion response
face recognition /1 channel for video, 4 for images/
mobile app
PTZ
motion response
 
 
Connectors
RCA audio input11
RCA audio output11
USB 2.022
USB 3.2 gen11
HDMI11
Max. HDMI resolution3840x2160 (4K)3840x2160 (4K)
VGA1
/maximum 1920x1080 px./
LAN12
LAN speed1 Gbps1 Gbps
Alarm input416
Alarm output14
RS-485
RS-232
Video recording
Bandwidth160/160 Mbps256/160 Mbps
Resolution (all channels)1920x1080 px
Video compression formatH.265+, H.265, H.264+, H.264H.265, H.264, MPEG4
Max. resolution (IP)
12 MP (~4000x3000 pixels) /12 MP/
4096x2160 px
Drives
Number of SATA24
Max. total capacity20 TB
24 TB /4x6TB/
General
Power supply12В100 – 240В
Power consumption15 W20 W
Operating temperature-10 °C ~ +55 °С-10 °C ~ +55 °С
Maximum humidity90 %90 %
ONVIF
CMS
Dimensions385x315x52 mm445x390x70 mm
Weight
1 kg /<1 kg/
5 kg
Added to E-Catalogmarch 2023september 2017

Camera connection

Possibilities for connecting cameras available in the registrar.

For analogue DVRs and digital NVRs (see "Type") in this case, everything is simple: the number of video channels corresponds to the largest number of incoming video signals that can be connected to the device. Such a signal can come both from a camera and from an intermediate device — for example, a quad that combines a picture from 4 cameras. But in hybrid HVRs, the meaning of this paragraph is more specific. For these recorders, this specifies the maximum number of inputs that the device can handle in AHD only mode (i.e., analogue cameras only, no IP cameras). Data on hybrid mode (AHD+IP), as well as for using only IP cameras, are given separately for such recorders (see below).

Numerous channels ( 32 channels, 64 channels and even 128 channels) allows you to create an extensive video surveillance system based on the registrar without using additional equipment (for example, the same quads). On the other hand, this characteristic significantly affects the price, and for living conditions, registrars for 4, 8 or 16 cameras are quite enough.

Features

PTZ support. Compatibility of the recorder with cameras that have the PTZ function — “pan, tilt, zoom”, that is, the ability to rotate and tilt the lens, as well as zoom in / out. PTZ support allows you to control these functions through the DVR. In analogue cameras, the RS-485 port is used for its operation (see "Additional connectors").

Responding to movement. A function that allows the DVR to recognize movement in the frame. Specific ways of using this function can be different: automatic start of recording, setting a timestamp (if the video is being recorded continuously), signaling an alarm output, notifying the operator, etc. Note that motion sensors can also be installed in the surveillance cameras themselves; however, the presence of this function in the recorder eliminates the need to specifically look for such cameras (which usually cost a lot).

Face recognition. This term refers to the extended possibilities for working with the faces of people caught in the frame. Recorders with this function, usually, are able not only to determine the presence of a face in the frame, but to recognize its characteristic features, save the resulting “portraits” and compare them with the database stored in memory. The latter, in turn, allows you to identify people and opens up a number of additional features. A specific set of such features should b...e specified separately, here we will give a few examples. So, in many models, the face recognition system allows you to quickly search for a person in the video archive, eliminating the need for the user to personally view large volumes of video materials. Using such a system, you can record the time of arrival and departure of employees to work, as well as automatically save information about the visits of third-party visitors. Facial recognition can be added to the lock on key cards — and an attacker will not be able to open such a lock, even if he takes possession of the card. There are also more complex and advanced features — for example, the creation of groups of employees with different access rights, with access restriction and/or an alarm when an outsider appears in a prohibited area for him.

PoC power. An analogue of the PoE technology described above, used in traditional surveillance cameras (so-called AHD). Allows you to supply power to such a camera from the registrar through the same coaxial cable that is used to transmit the video signal; this greatly simplifies the connection and increases the reliability and security of the entire system. So, when installing the camera, it is enough to lay only one wire, while its operation does not require accumulators / batteries, which can sit down at the most inopportune moment.

Wi-Fi. In registrars, the built-in Wi-Fi module is most often used for two tasks: to work with IP cameras that support such communication, and to connect the registrar itself to a local network (or even the Internet) via a wireless router / access point. And in models with a mobile application (see below), Wi-Fi can also be used for direct communication with the control gadget. Anyway, such a connection allows you to do without fuss with wires and connectors. The disadvantages of this feature include perhaps a slight increase in price compared to analogues without Wi-Fi, but this moment often turns out to be almost invisible against the background of the total cost of the registrars themselves.
Also, the specific supported communication standard can be specified in the characteristics — usually Wi-Fi 4 (802.11n) or Wi-Fi 5 (802.11ac). In this case, the differences between them are most often not fundamental: modern Wi-Fi modules, usually, support several standards at once, so there are no problems with compatibility, and the connection speed is usually more than sufficient to work as intended.

Wi-Fi ready. This marking means that the recorder does not have a built-in Wi-Fi module (see above), but can use such a connection when an external adapter is connected (usually not included in the standard package). Theoretically, this configuration should provide additional convenience: the user can choose whether he needs Wi-Fi functionality in this particular registrar, and if in doubt, you can purchase the device itself without overpaying for wireless capabilities, and buy the adapter later if necessary . However, in fact, Wi-Fi ready models are extremely rare these days: most buyers decide whether they need wireless when planning their surveillance system, and built-in Wi-Fi modules are not that expensive, especially compared to the total cost of recorders.

— Mobile app. The ability to work with the registrar through a mobile application installed on a smartphone, tablet or other similar gadget. In this case, specific formats for connecting to a controlling gadget can be different: direct connection via Wi-Fi, work via a local network, or even remote access via the Internet from anywhere in the world; Often multiple options are supported. All these details should be specified separately, as well as the specific functionality of the mobile application. However, usually, this functionality is quite extensive, it provides access, if not to all, then at least to the most important functions of the registrar. So, from a smartphone / tablet, you can view footage and live broadcasts from cameras, copy (and sometimes delete) recordings, change many settings, etc. Control applications are usually released for both iOS and Android, so they can be install on almost any modern consumer-grade mobile gadget.

Support for USB modems. The ability to use an external modem connected via USB to transfer data using the 3G or 4G mobile standard. This gives independence from wires and allows the registrar to be used even where there are no wired computer networks — of course, if there is coverage. Models with this feature usually have wired interfaces, and support for a 3G / 4G modem plays the role of a failover — a backup option in case of problems with the main connection. Note that the specific type of supported mobile network depends mainly on the modem used (the compatibility of the recorder with different models will not hurt to clarify separately, but most often this is not a problem).

— Remote control. The presence of a remote control in the delivery set of the registrar. It is often more convenient to control the device from the remote control than from a computer over the network or from your own control panel.

USB 3.2 gen1

The number of USB 3.2 gen1 ports in the design of the registrar. This interface is used to connect various peripheral devices: USB drives for copying files or updating firmware, keyboards, mice, etc.

Specifically, USB 3.2 gen1 is the successor to USB 2.0. It supports higher data transfer (up to 4.8Gbps) and higher power supply.

LAN

The total number of LAN ports (RJ-45) provided in the design of the registrar for connecting to an external network.

LAN (RJ-45) is a standard computer network connector. In this case, they can be found both in traditional DVRs that work only with analog cameras, and in NVRs and HVRs. As a rule, the registrar is equipped with one port of this type, however, there are exception models with two or more ports.

Note that many NVRs are supplemented with RJ-45 connectors for connecting cameras and powering them using PoE. Since these ports are not intended for connection of the registrar with an external network, in this case they are not taken into account, but are indicated separately (see the corresponding paragraph).

Alarm input

The number of alarm inputs provided in the design of the registrar.

Alarm inputs allow the recorder to respond to various events and signals from other elements of the security system. For example, a door opening sensor can be connected to such an input, and upon a signal from it, the registrar will turn on the camera above this door. This ensures the automation of the security system and makes it less dependent on the human factor.

Alarm output

The number of alarm outputs provided in the design of the registrar.

Alarm outputs are used to transmit signals from the recorder to other elements of the security system — an alarm siren, electronic locks, spotlights, etc. Thus, the system can automatically respond to events recorded by the registrar — for example, block the doors when moving in the frame.

RS-485

A physical interface for managing and monitoring various aspects of a video surveillance system. As a rule, the RS-485 connector is used in recorders to control PTZ cameras, connect keyboards, matrix switchers and other similar equipment.

RS-232

The presence of an RS-232 service interface in the recorder (also known as a COM port). Through such a connector, it is usually possible to remotely control the device’s operating parameters from a computer or specialized equipment using appropriate software. Also, the RS-232 port can be used to update the recorder firmware.

Bandwidth

The maximum data stream in Mbit/s that the NVR is capable of processing when recording and displaying. The throughput parameter is specified as the maximum incoming/outgoing speed, or as the sum of incoming and outgoing streams (total throughput). It is calculated in such a way that the throughput exceeds the total flow of all IP cameras connected to the DVR, and another 25–30% is put in reserve for playing video or viewing it via network access.
Hikvision DS-7616NXI-K2 often compared
Hikvision DS-7732NI-K4 often compared