Range of flight
The distance that a quadcopter can travel in the air on one full battery charge. Simply put, this is the drone's range in kilometers. Note that smaller, lighter drones tend to have a more limited flight range compared to larger, more powerful models. In the latter, it can reach 30 km or more. Also, the maximum flight distance is often influenced by weather factors and the load carried by the copter.
Maximum flight time
Maximum flight time of a quadcopter on one full battery charge. This indicator is quite approximate, since it is most often indicated for ideal conditions - in real use, the flight time may be less than stated. However, by this indicator it is quite possible to evaluate the general capabilities of the copter and compare it with other models - a longer declared flight time in practice usually means higher autonomy.
Note that for modern copters, a flight time
of 20 minutes or more is considered a good indicator, and in the most “long-lasting” models it can exceed 40 minutes.
Horizontal speed
The highest speed that a quadcopter can achieve in horizontal flight. It is worth considering that in most cases this parameter is indicated for optimal operating conditions: a fully charged battery, low air temperature, minimum weight, etc. However, it is quite possible to rely on it both when choosing and when comparing different models of copters with each other.
Note that quadcopters were originally designed as stable and maneuverable aerial platforms, and not as high-speed vehicles. Therefore, you should specifically look for
a fast quadcopter only in cases where the ability to quickly move from place to place is critical (for example, when the device is supposed to be used for video recording of fast-moving objects over large areas).
Viewing angles
The viewing angle provided by the standard quadcopter camera; for optics with adjustable zoom, usually, the maximum value is taken into account.
The viewing angle is the angle between the lines connecting the centre of the lens to the two opposite extreme points of the visible image. Usually measured along the diagonal of the frame, but there may be exceptions. As for the specific values of this parameter, in modern copters they can range from 55 – 60 ° to 180 ° and even more. At the same time, a wider angle (ceteris paribus) allows you to simultaneously fit more space into the frame; and a narrower one covers a smaller space, however, the objects that are in the frame look larger, it is easier to see individual small details on them. So when choosing by this parameter, you should consider what is more important for you: wide coverage or an additional zoom effect.
Smartphone mount
The presence of a mount for a smartphone or tablet on the quadcopter control panel.
This feature allows you to fix the electronic gadget in such a way that in the process of controlling the machine, its screen is constantly in front of the operator's eyes. This function is relevant primarily for live broadcasts from the device (see "Live broadcast (FPV)"). At the same time, the mount for the gadget can be found both in quadrocopters that initially have FPV mode, and in models that are not equipped with cameras (in which the possibility of live broadcasting depends on the characteristics of the installed camera). However, note that the size of the mount and its compatibility with various electronic devices may be different, so before buying it's ok to clarify what exactly can be installed on the remote control.
Information display
The presence of an information display on the quadcopter control panel.
Note that this feature should not be confused with the FPV broadcast screen (see below). The information display is usually a simple segment display capable of displaying numbers, individual letters, and, on some models, a limited set of special icons. However, even such equipment significantly expands the capabilities of the remote control and allows the operator to receive a lot of additional information: battery charge, signal level, range, flight altitude, etc. At the same time, the auxiliary screen is inexpensive and can be used even in low-cost models. And in advanced drones, it may well complement the broadcast display: separating data into different screens contributes to ease of control.
Display for broadcast FPV
A special display that can display the image from the drone's camera in the live broadcast (FPV) mode.
The display for FPV broadcasting is usually placed on the remote control: this allows you to view the image from the camera without being distracted from the control. At the same time, the specific design of such a screen may be different: in some models it is built directly into the remote control, in others it is placed on a special mount and can be removed (or even work separately from the remote control). However, anyway, this feature means that viewing live broadcasts from the copter is available in the original configuration, for this you do not need to look for additional devices such as smartphones or tablets.
An alternative to the display in some drones is an FPV broadcast helmet. It has its advantages (see below), but the traditional screen is cheaper, moreover, it is easier and more versatile to use: so, it can be viewed without problems even with glasses, and the image can be seen by several people.
USB charging
The ability to charge the quadcopter battery from a standard USB port. This charging method is convenient primarily due to the prevalence of USB: such ports are available in the vast majority of modern computers and laptops, corresponding adapters for 230 V sockets and car cigarette lighters are available, and portable power banks use USB as standard connectors. Thus,
models with USB charging have very extensive connectivity options and are not limited to the "native" charger. And although the power of such charging is relatively low, however, for most copters, even this is quite enough.
Dimensions
General dimensions of the device. A fairly obvious parameter; we only note that for models with a folding structure (see above), in this paragraph, the dimensions in the working (unfolded) position are given, and the dimensions in the folded form are specified separately.