USA
Catalog   /   Sound & Hi-Fi   /   Musical Instruments   /   Pianos & Keyboards   /   Digital Pianos

Comparison Yamaha DGX-670 vs Roland FP-60

Add to comparison
Yamaha DGX-670
Roland FP-60
Yamaha DGX-670Roland FP-60
Compare prices 41Compare prices 1
TOP sellers
Main
Bluetooth
Bodyportableportable
Keys
Number of keys88 шт88 шт
Sizefull sizefull size
Mechanicsmalleusmalleus
Sensitivity adjustment
Rigidityweightedweighted
Specs
Polyphony256 voices288 voices
Built-in timbres630 шт351 шт
Auto accompaniment
Accompaniment styles263 шт
90 шт /two variations/
Tempo change5 – 50010 – 500
Metronome
Sequencer (recording)
Built-in compositions
Effects and control
Timbres layering
Keyboard split
Reverberation
 /10/
Chorus
Transposition
Fine tuning
More featuressound management system, general correctiontuning selection, equalizer
Connectors
Inputs
Mini-jack (linear)
USB to device (type A)
Mini-jack (linear)
USB to device (type A)
Connectable pedals2 шт3 шт
Outputs
USB to host (type B)
USB to host (type B)
Headphone outputs1 шт2 шт
Linear outputs2 шт
General
Built-in acoustics12 W26 W
Number of bands22
Displaycolourmonochrome
Power consumption15 W5 W
Dimensions (WxHxD)1397x151x445 mm1343x125x313 mm
Weight21.4 kg16.5 kg
In box
music stand
pedal
 
music stand
pedal /damper/
PSU
Color
Added to E-Catalogmarch 2021november 2017

Polyphony

The number of voices supported by the digital piano — more precisely, the maximum number of voices that the instrument can play at the same time.

This parameter should not be confused with the number of notes that can be played simultaneously on the keyboard. The fact is that in many timbres, several voices (tone generators) are used for each note at once — this is the only way to achieve a more or less reliable sound. Thus, the required number of voices can be many times higher than the number of notes — for example, the simplest chord of 3 notes may require 9 or even 12 voices. In addition, tone generators are used to play auto accompaniment parts and built-in songs (see below), and here the number of voices can already be measured in tens.

In light of all this, polyphony of less than 90 voices is typical mainly for relatively simple and inexpensive instruments that are not designed for complex tasks. The smallest number found in modern digital pianos is 32 voices. It is desirable for a more or less solid instrument to have at least 96 voices, and in top models this figure can reach 256.

Built-in timbres

The number of built-in sounds provided by the Digital Piano.

Despite the name, digital pianos are extremely rarely designed to imitate the sound of only a piano — the electronic hardware allows them to provide other timbres of sound. In addition, even the piano has its own varieties — for example, among the grand pianos there are 6 main classes, from large concert to miniature. So the built-in sounds can cover different kinds of pianos, as well as other instruments and sound effects.

The abundance and variety of timbres in digital pianos as a whole is not as great as in synthesizers, however, in this category there are very “charged” models, with a hundred timbres or more (in the most multifunctional, this number can exceed 900). However, it is worth specifically looking for a “multi-instrumental” model if you do not intend to be limited to the sound of the piano and would like to have more freedom of choice. It is worth remembering that a specific set of timbres can be different.

If the instrument is bought exclusively as a piano, then here, on the contrary, it is worth paying attention primarily to solutions with a small number of timbres. Such models are not only cheaper than "universals" — they can also sound better (due to the fact that there are few timbres and the manufacturer can carefully approach the sound quality of each built-in "instrument").

Accompaniment styles

The number of Auto Accompaniment Styles (see above) originally stored in Digital Piano memory.

Different auto accompaniment styles differ from each other in the same way that different melodies differ from each other — in tempo, time signature, rhythmic pattern, set of instruments used, etc. Accordingly, the more styles initially available in the instrument, the wider the choice of the musician and the higher the probability of finding the option that best suits a particular situation. However even numerous styles does not guarantee that among them there will be a suitable one; in addition, we note that with the same number of styles, their specific set in different instruments can also be different. However, custom styles can be provided for this case (see below).

Summarizing, we can say this: if you plan to work intensively with auto accompaniment, in addition to the number of styles, it will not hurt to clarify their specific range.

Tempo change

The range over which the tempo of the sound played by the instrument can change. It can be either a built-in melody or a part recorded on a sequencer, or an auto accompaniment, a tutorial or a metronome. For more information on all of these features, see the corresponding glossary entries. Here we note that a change in tempo is often required in fact — for example, to speed up an initially "sluggish" accompaniment or slow down a training programme that is difficult to master at the original tempo.

Tempo is traditionally indicated in beats per minute. The classical, "academic" range covers options from 40 bpm ("grave", "very slow") to 208 bpm ("prestissimo", "very fast"), however, in modern digital pianos, the working range of tempos is often significantly wider.

Chorus

The presence of the chorus effect in the digital piano.

Initially, this effect was developed as an attempt to simulate the choral sound of several instruments of the same type. Even a perfect choir never plays 100% in sync, which is what the creators of the chorus tried to reproduce. This effect works as follows: several copies are taken from the main signal, which are played along with it — but not strictly simultaneously, but with a small (up to 30 ms) delay, selected randomly for each individual signal. This really allows to imitate the effect of polyphony to a certain extent, however, such sound is still far from a full-fledged choir. However, the chorus itself is quite interesting as an additional effect.

More features

Additional features and sound customization options provided by the instrument in addition to those listed above. In this paragraph, usually, various original proprietary technologies and solutions are indicated; the specific meaning of these functions is best specified in the documentation for the tool.

Connectable pedals

The largest number of pedals that can be connected to the Digital Piano at the same time.

Pedals are an indispensable element of equipping a traditional piano, respectively, they are also necessary for electronic analogues of this instrument. However, in stationary devices (see "Body") the pedals are made built-in (see above), so this option is found only in portable models. Also note that if a stationary digital piano has 3 pedals as standard — like in a real piano — then portable digital pianos often have fewer. This is due to the fact that a full set of three pedals is rarely required in fact, and in many cases just one is enough (especially since many instruments allow you to reconfigure its functions).

In general, it makes sense to specifically buy an instrument with three connected pedals mainly for demanding professional musicians who value the full functionality of the pedals (or the ability to tie an extended set of functions to the foot control). In other cases, this parameter is not particularly important.

Headphone outputs

The number of headphone outputs provided in the design of the digital piano.

Headphones can come in handy in situations where it is inconvenient or undesirable for one reason or another to use the digital piano's built-in speakers — for example, if you need to keep quiet and not disturb others with music, or vice versa, the environment is too noisy and it is difficult to hear the sound of the instrument. At the same time, many digital pianos have two headphone outputs, which allows two people to use the “ears” at the same time. This feature can be useful, for example, when playing 4 hands on one keyboard, or when teaching (the second pair of headphones in such cases is used by the teacher).

The outputs of this type themselves most often use a 3.5 mm mini-Jack or 6.35 mm Jack connector. The first option is the most popular in modern headphones; the Jack connector, in turn, is somewhat more reliable, and the “ears” with a mini-Jack plug can be connected to such a jack using a simple adapter.

Linear outputs

The number of line outputs provided in the design of the digital piano.

The line output allows you to send the sound from the instrument to external audio equipment. In this case, the sound is transmitted in an analogue format, and to play it, it is enough to pass it through a power amplifier; and active acoustics can generally be connected directly to the line output. The outputs themselves can use different types of connectors, but most often they are 3.5 mm mini-Jack or 6.35 mm Jack, compatible with most audio equipment either directly or through the simplest adapters.

Multiple line outputs allow you to connect multiple signal receivers to the instrument at once — for example, speakers with an amplifier for playback and an external recorder for recording. However, digital pianos rarely have more than 2 line outputs — more, taking into account the specifics of the use of such instruments, is simply not required.
Yamaha DGX-670 often compared