Number of keys
The greater the number of keys — the wider the range of the instrument, the lower and higher notes you can take on it right during the game, without resorting to tricks like octave shift (see below). By comparison, a full size piano keyboard has 88 keys. However, in synthesizers, such an amount is rare, because. the instrument would have turned out to be too bulky and expensive, and not every musician, even a professional one, needs such an extensive range. Thus, 88-key keyboards are used primarily in high-end workstations (see "Type"). For ordinary synthesizers, the standard is
49, 61 or 76 keys ( there are also options for
73 keys) — this is usually quite enough (while the "golden mean" option is considered to be
61 keys). And small children's models can have 32 keys.
Learning mode
The presence
of a learning mode in the design of the synthesizer.
The purpose of this function is clear from the name. It is most often based on the following principle: the synthesizer itself tells the student which keys to press, displaying the keyboard on the display or highlighting the necessary keys using the backlight (if available, see above). Of course, at different levels of learning, the format of such prompts will also be different: for example, at the very beginning, the synthesizer highlights the necessary notes until they are pressed, and at the final stage it highlights them at the tempo at which you need to play the melody, and evaluates the accuracy of the student pressing the desired keys. There are also other features and nuances of learning — for example, the mode of separate learning of parts for the left and right hands, when the instrument itself plays one part and tells the student how to play the second. In addition, a metronome function is practically mandatory for a synthesizer with this mode (see below).
Regardless of the specific functionality, this mode will be very useful for those who are just developing their keyboard playing skills.
Linear outputs
The number of line outputs provided in the design of the synthesizer.
The line output is used to transmit the sound produced by the synthesizer to external devices. At the same time, unlike the MIDI output, a “ready” sound is transmitted through such a connector — an analogue line-level audio signal that can be connected to another audio device — for example, to a power amplifier or active speakers for playback, to a computer or mixing console for recording, etc. Keep in mind that the line outputs can use different types of connectors — for example, 3.5 mm mini-Jack or 6.35 mm Jack; Specifically, these connectors are described in more detail in the “Inputs” section, but the matter is not limited to them.
Multiple analogue inputs make it possible to connect the synthesizer to several external audio devices at the same time — for example, to an amplifier for playback and a recorder for recording.
Built-in acoustics
Rated power of the built-in acoustics of the synthesizer.
This indicator characterizes, first of all, the volume at which the instrument's built-in speakers can sound. At the same time, one should not forget that in most cases such speakers are intended rather for individual use — so that the music can be heard by the musician himself and the people in close proximity to him. With this application, high power is not needed for normal hearing; and if you still need a loud sound, you can connect the instrument to an external speaker.
Therefore, it makes sense to pay attention to the power of the
built-in acoustics if the synthesizer is planned to be used for more serious tasks than individual listening, and if external acoustics may not always be available.
Number of bands
The number of bands provided in the synthesizer's built-in speaker system. A band in this case can be called a separate set of speakers responsible for its part of the frequency range. For example, a system with separate bass and treble speakers would be called a two-way system.
The meaning of this division is due to the fact that for different frequencies the requirements for speakers will also be different. Accordingly, the allocation of its own speakers for each frequency band can significantly improve the sound quality. At the same time, it is worth remembering that in synthesizers, the built-in acoustics are not intended for high-quality sound reproduction, but rather to give a general idea of \u200b\u200bwhat the instrument is currently playing. Therefore, even in the most advanced models, more than two bands are not found, and for the entry-level and intermediate level, one is often enough.
