Comparison Atemi 2000 Pro vs DHS A6002

The style of play for which the racket is designed. For each playing style, optimal indicators of speed, spin and control (see below); The specific values of these characteristics may vary, but the general trend in models of the same style is usually clearly visible.

— Attacking. The attacking style of play requires high speed - it is this parameter that, as a rule, dominates the characteristics of rackets of this style.

— Defensive. When playing in a defensive style, the speed of the ball is relatively low, which is compensated by the abundance of technical elements such as spins and cuts. Accordingly, “defensive” rackets emphasize control (and some spin) and are also designed to absorb high ball speed (in case the opponent prefers an attacking style).

— Universal. A style of play that combines attacking and defensive elements. As a rule, all-purpose rackets have approximately equal speed and control.

Each style has its specializations. For example, attacking rackets may be designed for maximum speed - or a combination of slightly lower speed with an increased degree of control; in universal models, the ratio between speed and spin depends on which direction the emphasis in the design of the product is shifted - towards attack or defence; and so on.

Also, note that a certain style may include not only ready-made rac...kets but also bases(see “Product type”).

— Straight. The simplest form, assumes a flat surface of the handle, without extensions/contractions. For some players, this shape may well be optimal, but in general, straight handles are considered less comfortable than flared or anatomical ones. Therefore, although quite a lot of such rackets are produced, they are noticeably smaller than models with other types of handles, and they mainly belong to the initial class (1 *, 2 *), although there are rare exceptions.

— Flared. The handle of this shape expands noticeably towards the end. This makes the grip more comfortable and secure than the straight shape, while flared handles are easier and cheaper to manufacture than anatomical ones. Due to this, this option is very popular today, it is used in most rackets of all classes.

— Anatomical. This category includes handles, the shape of which is optimized for the shape of the human hand. Usually, they have characteristic notches, where the fingers of the athlete fall when held; this can improve the comfort of use and reduce fatigue. On the other hand, such handles are somewhat more complicated, and as a result, they are more expensive than straight or flared ones. In addition, they require increased attention when choosing: even a very small discrepancy between the profile of the handle and the size of the hand can cause inconvenience and reduce all the...advantages of such a racket to zero. As a result, anatomical handles are somewhat less common than conical ones.

Note that the main selection criterion for the shape of the handle is solely the personal preferences of the athlete. There are no general rules about which option is “better” or “worse”: for different people, the optimal form often turns out to be different. Therefore, before buying, it is highly advisable to try the racket in your hand and evaluate the suitability of its handle for your own preferences.

Note that the same racket model can be produced in several modifications that differ in the shape of the handle; in such cases, the characteristics indicate all available options. And the bases (see "Product type") are, by definition, produced with different shapes of handles; therefore, for this type of product, this moment is not indicated at all.

Table tennis rackets have 3 main practical characteristics: speed, spin and control. The general class of the product, the style of play (see above), the available techniques, the requirements for the player's skills, etc. depend on their values and ratio. One of the most popular designation options is on a hundred-point scale; This scale is also used in our catalogue.

The speed indicator describes how fast the ball will move after contact with the racket. High-speed values are very important for an attacking style of play.

Table tennis rackets have 3 main characteristics: speed, spin and control. The general class of the product, the style of play (see above), available techniques, requirements for player skills, etc. depend on their values and ratio. One of the most popular designation options is on a hundred-point scale; This scale is also used in our catalogue.

The higher the spin number, the more the ball will spin with the corresponding hit and the better the racket is suitable for various spinning techniques.

Table tennis rackets have 3 main practical characteristics: speed, spin and control. The general class of the product, the style of play (see above), available techniques, requirements for player skills, etc. depend on their values and ratio. One of the most popular designation options is on a hundred-point scale; This scale is also used in our catalogue.

Control describes the overall handling of a racket. Roughly speaking, this is a parameter of how easily it can be used to give the tennis ball exactly the speed, direction of flight and rotation that the athlete wants to provide. High values on the control scale will be comfortable regardless of the level of the player and the style of play; however, increasing the speed/rotation hurts control, as a “faster” or “spinning” racket is usually more demanding on the accuracy of movements. Therefore, many models for professionals and experienced amateurs, usually, are distinguished by a low degree of controllability, and “beginner” rackets, on the contrary, have high control parameters and low speed/spin.

The sponge is the bottom layer of the coating, located under the outer coating (rubber is most often used for such a coating). The thickness of the sponge determines the characteristics of the impulse that the racket transmits to the ball, and, accordingly, the characteristics of the flight of the ball after the impact; in other words, this parameter affects all three practical characteristics of the racket - speed, rotation, control. Accordingly, models for different playing styles (see above) also differ in sponge thickness.

So, a small thickness - up to 1.5 mm - is typical for protective style products, which are distinguished by low speed and good control. All-purpose rackets use sponges of the thickness of 1.5 – 1.8 mm, which provides a balance between speed and control. And thick sponges - from 2 mm - are installed in rackets for an attacking game, and the greater the thickness, the higher the speed and rotation, and the worse the control.

The presence of a case. Note that this accessory can be supplied not only as part of a set (see "Product type"), but also with a separately sold racket, but bases for rackets with cases are not sold.

The purpose of the case is obvious: it facilitates and simplifies the transportation of the racket, protecting it from unwanted contact with surrounding objects and other undesirable influences that can damage the working surface of the product. Cases can have a different design and layout: some racket is placed entirely, while others cover only the pads, leaving the handle outside. The case can be purchased separately or even made independently, but this is associated with unnecessary hassle. At the same time, the complete accessory fits optimally with the racket and does not require any extra effort.