Comparison Oclean X Pro Elite vs Oclean Air 2

The number of operating modes provided in the device. For flossing systems (see "Type"), this paragraph takes into account the characteristics of the irrigator; data on the toothbrush (if they differ) are indicated in the note.

The mode in this case means the general format of operation, as explained in more detail in the "Modes" section below. It's important not to confuse this parameter with the number of power settings, which are discussed separately in the "Power modes" section. These characteristics are generally distinct from each other. For instance, a toothbrush with one operating mode may have multiple power settings, and conversely, there can be just one power level with several operating formats.

Anyway, the presence of several modes significantly expands the functionality of the brush/irrigator, allowing the device to be used for different procedures (or for several users with different needs in terms of oral hygiene). The flip side of this versatility is the increased cost. In addition, note that with the same number of modes, a specific set of these modes in different models may be different; so before buying, be sure to clarify how the capabilities of the selected model meet your requirements.

The number of power modes provided in the device. For flossing systems (see "Type"), this paragraph takes into account the characteristics of the irrigator; data on the toothbrush (if they differ) are indicated in the note.

It's important to distinguish between the number of power settings and the number of operating modes, as these are distinct parameters. Refer to the "Operating modes" section for details on the various modes. In this context, we emphasize that power adjustment, if available, may not be accessible in all modes. For example, in an irrigator offering two modes of operation—continuous jet and pulsation—power adjustment might only be available in the continuous jet mode.

Having multiple power settings enhances the versatility of the device. Even if a device technically offers only one operating mode, the ability to adjust the intensity of the treatment allows users to tailor the device for various tasks. For instance, in many toothbrushes, the traditional 2D brushing mode at its lowest power setting effectively serves as a gentle treatment option. However, it's worth noting that the capability to adjust power levels can somewhat increase the device's cost.

Modes of operation supported by the device.

Toothbrushes nowadays offer a wide range of modes beyond the traditional daily cleaning (often referred to as "2D" mode). You can find toothbrushes with options like the advanced 3D mode, as well as programs for gentle and deep cleaning, polishing, whitening, gum massage and tongue cleaning. On the other hand, irrigators typically offer different modes in addition to the standard continuous water jet. These additional modes often include pulsation and spray options.

Here is a detailed description of the most popular options found in brushes:

— Daily cleaning (2D). The "2D" mode of operation in toothbrushes closely resembles the traditional manual toothbrush experience. In this mode, the bristles of the brush move in a single plane, and the exact movement pattern may vary depending on the cleaning technology used. The intensity of brushing is typically medium to high, making it suitable for individuals with relatively healthy and not overly sensitive teeth. The recommended daily brushing time is 2 minutes, with 30 seconds allocated to each quadrant of the mouth. These corresponding settings are usually available in the timer function, if the toothbrush is equipped...with one. While "2D" brushing is somewhat less effective than "3D" (as mentioned below), it's a feature that can even be found in more affordable toothbrush models.

— Daily cleaning (3D). This feature, available in brushes with reciprocating-rotating and reciprocating-sweeping technology, involves bristle pulsation in addition to the standard cleaning motion. The pulsating movement, which goes deep into the brush head and back, enables cleaning in three dimensions simultaneously. This greatly enhances efficiency compared to the 2D cleaning mentioned earlier. These bristles not only address the outer tooth surfaces but also reach the sides and interdental spaces to some extent (though it's not a complete replacement for dental floss). However, it's worth noting that this advanced functionality typically comes at a higher cost.

— Gentle cleaning. The gentle treatment program, typically used for sensitive teeth and gums prone to bleeding, is common in brushes with reciprocating-rotating and reciprocating-brushing technologies. In these brushes, the gentle mode often involves reducing the nozzle's rotation or vibration speed. In sonic and ultrasonic models, gentler treatment is achieved by reducing vibration intensity. Regardless of the technology, this mode aims to minimize discomfort during brushing and the risk of gum damage, even when using standard nozzles. For the gentlest effect, it's advisable to use this function with a nozzle designed for sensitive teeth.

— Deep cleaning. Most often, this name means cleaning with a standard intensity, but an increased duration — for example, 3 minutes instead of the usual 2 minutes (45 seconds for each quadrant of the mouth instead of the traditional 30 seconds). This mode allows you to effectively clean your teeth and remove dirt, for which normal daily brushing is not enough.

— Polishing. A mode for treating relatively clean teeth that do not require a full-length cleaning. Usually, polishing is carried out at a reduced frequency of vibrations (rotations) and takes noticeably less time than conventional processing (for example, 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for whitening tooth enamel and removing stains, especially from the front teeth, is often an extended version of the regular brushing mode. For example, in a whitening mode, the brush might operate normally for 2 minutes and then switch to increased intensity for 30 seconds. Specific details about this mode, including any contraindications (especially for individuals with sensitive teeth or gum issues), should be checked separately.

— Massage gums. Gum treatment can be offered either as a separate program or as an add-on to the regular brushing routine. In the latter case, it typically involves a standard 2-minute toothbrushing program followed by activating an additional mode. This function not only ensures effective cleaning but also contributes to gum strengthening. It can be beneficial for addressing issues like inflammation and bleeding gums, although consulting a dentist is advisable in such cases.

— Cleaning the tongue. A separate mode for tongue cleaning is available in many electric toothbrushes. Brushing the tongue with an electric toothbrush can often cause discomfort due to tickling, so this mode typically offers a brief cleaning session lasting about 20 seconds. If needed, you can perform multiple sessions. It's important to note that the presence of a tongue cleaning mode doesn't necessarily mean that a specialized nozzle for tongue cleaning is included in the kit (as discussed in the "Nozzles" section), although it's commonly included.

It should be noted that in some toothbrushes, the mode change is carried out due to “smart” nozzles: when such a nozzle is installed, the device recognizes it by the built-in chip and automatically switches to the appropriate programme.

In turn, in irrigators, the features of the main modes are as follows:

— Jet (monoflow). The classic, most popular working format: a constant jet with a constant pressure. Provides sufficient efficiency for most tasks for which irrigators are used, while being extremely simple to implement and can be provided even in the most inexpensive models.

— Pulsating. Water supply with variable pressure. This mode is especially effective for removing dirt from the interdental space, under braces and in other hard-to-reach places.

— Spray. In this mode, a mixture of water and air is fed through the nozzle, due to which, instead of the usual jet, a cloud of small droplets flying at high speed is obtained at the exit. This mode is great for massaging the gums and general cleaning of the mouth.

The frequency of sound vibrations provided by a brush with a sonic or ultrasonic principle of operation (see "Cleaning technology").

A high oscillation frequency (from 40 000/min and above), ositively impacts the efficiency and quality of oral processing. In fact, brushes that generate more than 40,000 oscillations per minute are often referred to as ultrasonic brushes, although true ultrasound starts at much higher frequencies. However, it's important to note that these high-speed brushes tend to come with a higher price tag. It's also worth mentioning that for specific tasks, such as delicate treatment of sensitive teeth, relatively lower frequencies may be more suitable. Therefore, when choosing an oral care device, it's essential not to prioritize the maximum oscillation frequency but rather consider the individual needs of the user(s). Consulting a dentist for personalized recommendations is a prudent approach.

It's important to clarify that in this context, a full cycle of bristle movement is defined as one complete oscillation, which includes both the forward and backward motion. Some manufacturers employ a marketing tactic where they list their brush's operating frequency not in terms of complete oscillations but as the number of movements per minute, counting only half of the cycle — either the forward or backward motion. This can lead to impressive-sounding numbers in product specifications since the count of...movements is double the count of oscillations. However, the primary performance metric remains the number of complete cycles or oscillations, and that's the value provided in this section of our catalog.

The presence of an automatic frequency control in a toothbrush (sold separately or included in the delivery of the dental centre — see "Type").

This feature is exclusively present in sonic and ultrasonic toothbrush models, as mentioned in the "Cleaning Technology" section. The fundamental idea behind it is that the toothbrush automatically adjusts its oscillation frequency based on the selected mode. However, the specific implementation can vary. Some models operate only at predetermined frequency settings, while others offer manual adjustment of this parameter. There are also different control methods, such as the use of "smart" nozzles that trigger the corresponding mode automatically when attached. Regardless of the approach, automatic frequency control simplifies the user's experience by eliminating the need for unnecessary adjustments.

The presence of a pressure sensor in the device — a sensor that monitors the force with which the working nozzle is pressed against the teeth/gums.

This feature is primarily found in toothbrushes, including those that are part of flossing system units (as discussed in the "Type" section), but it can also be included in irrigators. Its primary function is to prevent potential harm to the teeth and gums caused by excessive pressure during brushing. The sensor's response can vary from one device to another; some devices emit a warning signal, while others reduce the bristle movement speed, and some may even shut off entirely in response to excessive pressure.

Having a pressure sensor in such devices can be beneficial not only for individuals with healthy teeth but also for those with heightened sensitivity or gum issues. It's a highly desirable feature for maintaining oral health. However, it's important to note that in many models, the pressure sensor is not integrated into the main body of the device but is instead part of the replaceable nozzle. Additionally, not all complete nozzle options may have this function, so it's essential to verify these details separately when choosing a device.

The ability to synchronize the device with a smartphone, tablet or other similar gadget. It is found mainly in toothbrushes, but can also be used in other types of devices (see "Type").

Synchronization with an external gadget, typically via Bluetooth, requires the installation of a dedicated application. The functionality of this app determines the available features when using the toothbrush with a smartphone or tablet. However, these functions extend well beyond what the toothbrush can do on its own, thanks to the smartphone or tablet's screen capabilities. Common features include displaying a timer countdown and the ability to customize the timer settings if the default values don't meet the user's preferences. The application also typically provides other relevant information, such as the selected brushing program and battery charge status. Some toothbrushes with this feature can even assess the overall effectiveness of each brushing session, process this data within the app (like tracking trends over time), and sometimes transmit this information over the internet, allowing for remote consultations with a dentist.

While in the past, the primary drawback of models offering smartphone synchronization was their high price, nowadays, even low-cost-friendly toothbrushes come with this feature. Additionally, some models go the extra mile by including dedicated smartphone holders for added convenience.

The presence of its own display in the design of the device.

These displays are typically small due to the compact size of the toothbrush or irrigator body. They usually offer basic functionality, capable of displaying one color and a limited set of characters. However, even with such constraints, they can convey various operational information, such as the selected mode, timer countdown, battery status, error messages, and more. As a result, these displays enhance overall convenience and visibility when using the device.

On the other hand, it's important to acknowledge that there's a growing number of models without displays, especially in the mid to high-end range. This shift is primarily driven by the widespread adoption of smartphone synchronization (as mentioned earlier), which offers several advantages over built-in screens. Firstly, the Bluetooth module required for synchronization is smaller and more cost-effective than a dedicated display. Secondly, smartphone screens and other control gadgets tend to be larger, more versatile, and easier to read compared to the small screens on toothbrush or irrigator handles. Additionally, the display on the device's handle is not visible during use, whereas a smartphone can be positioned in front of your eyes. As a result, it's worthwhile to seek out a model with this function if the ability to access data from a display is a crucial factor for you, regardless of whether you...have a smartphone or another additional device at hand.

Possibility of mounting the device on the wall.

The design of the mount for these devices depends on the device type (as mentioned earlier) and how it's typically used. In the case of most toothbrushes, which are typically self-powered, they come with a wall-mounted stand that also functions as a charger. Some irrigators and dental centers follow a similar setup, but many of these devices are designed for stationary use and have a larger main unit to which a handle with a nozzle attaches. In such models, the wall mount is designed to accommodate the entire main unit.

Wall installation offers a significant advantage by saving shelf space, which is particularly beneficial in tight spaces. However, this installation method entails additional preparatory work, which can be somewhat challenging. Furthermore, not all wall mounts facilitate easy removal and installation of the device, making it less suitable for situations where you frequently need to take the toothbrush or irrigator with you on trips.