Comparison Xiaomi MiJia T500 vs Oclean One Smart Sonic

The number of power modes provided in the device. For flossing systems (see "Type"), this paragraph takes into account the characteristics of the irrigator; data on the toothbrush (if they differ) are indicated in the note.

It's important to distinguish between the number of power settings and the number of operating modes, as these are distinct parameters. Refer to the "Operating modes" section for details on the various modes. In this context, we emphasize that power adjustment, if available, may not be accessible in all modes. For example, in an irrigator offering two modes of operation—continuous jet and pulsation—power adjustment might only be available in the continuous jet mode.

Having multiple power settings enhances the versatility of the device. Even if a device technically offers only one operating mode, the ability to adjust the intensity of the treatment allows users to tailor the device for various tasks. For instance, in many toothbrushes, the traditional 2D brushing mode at its lowest power setting effectively serves as a gentle treatment option. However, it's worth noting that the capability to adjust power levels can somewhat increase the device's cost.

Operating modes supported by the device.

Toothbrushes have the greatest variety of modes these days. In addition to the traditional (so-called "2D") daily cleaning, they can feature a 3D mode, delicate and deep cleaning programs, polishing, whitening, gum massage, and tongue cleaning. Irrigators, in turn, in addition to the standard format of operation with a continuous stream of water, most often provide a pulsation and/or spray mode.

Here is a detailed description of the most popular options found in brushes:

— Daily cleaning (2D). The operating mode is closest to traditional (manual) toothbrushes. In this mode, the bristles of the brush move in one plane; the trajectory of movement may vary, depending on the cleaning technology (see below). The intensity of action in this case is usually medium/high, so this operating format is intended mainly for relatively healthy and not too sensitive teeth. The recommended daily cleaning time is 2 minutes, 30 seconds for each quadrant of the oral cavity; the corresponding settings are usually provided in the timer (if available - see below). In general, 2D cleaning is somewhat less effective than 3D (see below), but this option can b...e provided even in the most inexpensive toothbrushes.

— Daily cleaning (3D). A function found in brushes with reciprocating-rotating and reciprocating-sweeping technology. In such models, in addition to the main cleaning technology, the bristles pulsate up and down (more precisely, into the head and back). Thanks to this, cleaning is carried out in three planes at once, which significantly improves efficiency compared to the 2D cleaning described above: the bristles not only treat the outer surface of the teeth, but also to a certain extent capture the sides and interdental space (although such cleaning is not a full-fledged replacement for the use of dental floss). The disadvantage of this function is traditional - relatively high cost.

— Gentle cleaning. A gentle cleaning program used mainly for sensitive teeth and gums prone to bleeding. In toothbrushes with reciprocating-rotating and reciprocating-sweeping cleaning technology (see below), the gentle mode most often provides for a reduced rotation/oscillation speed of the nozzle; in sonic and ultrasonic models, gentle cleaning can be ensured by reducing the amplitude of oscillations. In any case, this mode maximally eliminates discomfort during brushing and the likelihood of gum damage - even when using standard nozzles; and for the most gentle effect, it is best to use this function with a nozzle for sensitive teeth.

— Deep cleaning. Most often, this name refers to cleaning with standard intensity, but with an increased duration — for example, 3 minutes instead of the usual 2 minutes (45 seconds for each quadrant of the mouth instead of the traditional 30 seconds). This mode allows you to clean your teeth as effectively as possible and remove dirt for which regular daily cleaning is not enough.

— Polishing. A mode for treating relatively clean teeth that do not require full-scale cleaning. As a rule, polishing is performed at a reduced frequency of oscillations (rotations) and takes significantly less time than conventional treatment (for example, 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for whitening tooth enamel and removing various stains, primarily from the front teeth. It can be an extended version of the regular cleaning mode: for example, when turned on for whitening, the brush works in the regular format for 2 minutes, and then for 30 seconds in the high-intensity mode. These nuances should be clarified separately; it also does not hurt to clarify the contraindications for using this mode (especially with sensitive teeth and/or gum problems).

— Gum massage. Gum treatment can be provided as a completely separate program, or as an addition to the usual cleaning mode. This function provides not only effective cleaning, but also strengthening of the gums — it can be useful for treating inflammation and bleeding, although in such cases you should first consult a doctor.

When using irrigators, the gum massage effect is achieved by delivering a pulsating jet of variable intensity or by spraying a water-air mixture (a cloud of small droplets). For more information on these modes, see below.

— Tongue cleaning. A separate mode for cleaning the tongue. Many people find that cleaning their tongue with an electric toothbrush causes a tickling sensation that is difficult to tolerate for a long time. In light of this, this mode usually provides for a short duration of continuous treatment — about 20 seconds; if necessary, such “sessions” can be carried out several times. It is also worth mentioning that the presence of a tongue cleaning mode in itself does not mean that the kit includes a special attachment for such cleaning (see “Attachments”), although most often such a device is included in the kit.

It should be noted that in some toothbrushes, the mode change is carried out using “smart” attachments: when such an attachment is installed, the device recognizes it by the built-in chip and automatically switches to the appropriate program.

In turn, in irrigators the features of the main modes are as follows:

— Pulse. The pulse mode of the irrigator means the supply of cleaning fluid in the form of a pulsating stream. Such a flow effectively removes plaque and food debris, helps to thoroughly clean the space between the teeth, under the braces and periodontal canals (especially in hard-to-reach places).

— Jet (single-stream). Classic, most popular format of work: permanent jet with permanent pressure. Provides sufficient efficiency for most tasks for which irrigators are used, while being extremely easy to implement and can be provided even in the most inexpensive models.

— Pulsating. Water supply with variable pressure. This mode is especially effective for removing dirt from the interdental space, under braces and in other hard-to-reach places.

— Spray (atomizer). In this mode, a mixture of water and air is supplied through the nozzle, due to which, instead of a regular stream, a cloud of small drops flying at high speed is obtained at the outlet. This mode is great for gum massage and general cleaning of the oral cavity.

The frequency of sound vibrations provided by a toothbrush with a sonic operating principle. This parameter also means the maximum pulsation frequency for toothbrushes with support for pulsating cleaning technology (see above) and for irrigators with a pulsed operating mode. For dental centers (see "Type"), data on the irrigator is usually specified here, and the pulsation frequency of the toothbrush (if this parameter is relevant for it) is indicated in a separate note

High frequency of movements and pulsations(from 40 thousand/min and higher) has a positive effect on the efficiency and quality of treatment, allowing you to quickly deal with dense plaque and even tartar. On the other hand, too intensive treatment can also be undesirable - for example, with high tooth sensitivity. All this is also relevant for irrigators - except that the operating frequencies in them are noticeably lower, such devices very rarely produce more than 2 thousand pulsations per minute. So when choosing, do not chase the maximum indicators of the frequency of movements and pulsations, but first of all it is important to take into account the individual characteristics of the user - for a full guarantee, it would not hurt to consult a dentist about this.

The presence of a pressure sensor in the device — a sensor that monitors the force with which the working nozzle is pressed against the teeth/gums.

This feature is primarily found in toothbrushes, including those that are part of flossing system units (as discussed in the "Type" section), but it can also be included in irrigators. Its primary function is to prevent potential harm to the teeth and gums caused by excessive pressure during brushing. The sensor's response can vary from one device to another; some devices emit a warning signal, while others reduce the bristle movement speed, and some may even shut off entirely in response to excessive pressure.

Having a pressure sensor in such devices can be beneficial not only for individuals with healthy teeth but also for those with heightened sensitivity or gum issues. It's a highly desirable feature for maintaining oral health. However, it's important to note that in many models, the pressure sensor is not integrated into the main body of the device but is instead part of the replaceable nozzle. Additionally, not all complete nozzle options may have this function, so it's essential to verify these details separately when choosing a device.

Additional items supplied with the device (in addition to the base and attachment set).

The most popular types of such items nowadays are charging stand, accessory stand, UV sanitizer and case ; Here is a more detailed description of each option:

— Charging stand. A battery charging device designed as a stand serves the dual purpose of recharging the battery and offering added convenience for storing the device. It's worth noting that this function can apply to dental centers, even if they primarily operate on mains power (as indicated in the "Type of power" section). In such cases, the toothbrush included with the dental center typically runs on batteries, and the charging stand is typically integrated directly into the main unit of the dental center for ease of use.

— Stand for accessories. A device designed to hold various accessories, primarily interchangeable nozzles, can come in different designs. For example, in toothbrushes and portable irrigators, this device is often integrated into a charging stand, which includes both a charging socket and open compartments for accessories. In irrigators and fixed-layout dental centers, these compartments are usually built into the main unit or the lid of the water tank. In this case, the compartments are typically covered with lids for hygiene reasons, making it...a more hygienic option. Regardless of the design, having a dedicated stand for accessories enhances the convenience of storing them.

— UV sanitizer. A device that uses ultraviolet (UV) radiation for disinfecting the device, particularly replaceable nozzles, is typically designed as a distinctive container. In some models, this container also serves as a cover or case. The disinfection process effectively eliminates the majority of pathogenic bacteria and viruses, all without the need for additional chemicals and ensuring safety as the radiation remains confined within the container. However, it's important to note that UV disinfection is not effective against regular dirt and debris, so having this function doesn't eliminate the need to clean the nozzle through washing.

— Case / cover. The device comes with a storage and carrying container, which can be either a hard case or a soft cover. Hard cases offer better protection, while soft covers are more compact and can be rolled up when not in use. Regardless, both of these accessories are highly convenient for storage and transportation. They safeguard the contents from dirt and damage, and in many cases, provide space to store additional accessories, reducing the risk of losing them. While you could use makeshift packaging for the same purpose, the provided container is typically more practical.

This refers to the maximum duration a device can run continuously when powered by a fully charged battery or fresh batteries. It's worth noting that this metric may also apply to models designed for mains power, such as flossing systems that include rechargeable toothbrushes, in which case we're referring to the battery life of these toothbrushes.

It's important to note that device specifications typically indicate the maximum runtime under ideal conditions, often in the most energy-efficient mode of operation (and for models with replaceable batteries, using high-quality batteries). The actual battery life can vary depending on specific usage conditions. However, this parameter still serves as a valuable basis for comparing different models. Generally, differences in the claimed operating time correspond proportionally to the real differences in battery life. For example, if one toothbrush has a stated operating time of 20 minutes and another boasts 40 minutes, in practice, their battery life (under similar conditions) will likely differ by approximately two times.

It's important to consider that, for toothbrushes, this parameter can help estimate the number of brushing sessions you can expect on a single charge. Typically, the recommended daily brushing duration is 2 minutes. So, if a toothbrush has an operating time of 30 minutes, it's sufficient for approximately 15 cleaning sessions (or more realistically, around 14 or 13).

The time required to charge the battery from zero to 100% in a device with the appropriate power type (see above). This parameter can vary from 1 – 3 hours in relatively simple and low-power devices to a day in advanced models with capacious batteries. At the same time, the longer the maximum operating time on a charge (see above), the longer, usually, the time required for charging, although there is no hard dependence here.

In general, having fast charging capabilities improves the convenience of a device by reducing interruptions in its operation. However, there is a trade-off to consider: fast charging often means either a smaller battery capacity or a higher price due to the use of specialized technologies to speed up the charging process. When evaluating this parameter, it's essential to think about how you intend to use the device. For instance, if a toothbrush or irrigator is solely used at home by one person and comes with a charging stand, fast charging may not be a critical factor. The device remains consistently charged as it's constantly on the charger, and its battery doesn't deplete significantly during one use. The time between sessions, usually around 8 to 12 hours, is more than enough to maintain a charged battery, even for devices with slower charging. However, if you plan to use the device while traveling, where access to power outlets is sporadic, it's preferable to have minima...l charging time to ensure you can recharge quickly during your trips.

An indicator showing the battery charge level.

This function is predominantly found in battery-powered devices (as mentioned in the "Type of power" section). Implementing a charge indicator with replaceable batteries is challenging but occasionally seen. The specifics of this feature and how it operates can vary. The simplest form of a charge indicator is composed of LEDs. For instance, a green light might indicate a normal charge level, yellow signals a low charge, red signifies the need for charging, and blinking typically indicates that charging is in progress. More advanced indicators exist as well, such as those with their own displays that can show the specific charge level using a battery icon or even as a percentage. Regardless of the design, this feature simplifies monitoring battery status and reduces the risk of finding yourself with a dead battery at an inconvenient time.

The total weight of the device is an important consideration. In the case of stationary irrigators and dental centers (as mentioned in the "Type" section), weight isn't a significant factor since the main unit is placed on a stand or wall, and you don't have to hold it. In fact, for some of these models, weight may not even be specified. However, when it comes to toothbrushes or portable irrigators, the device's weight becomes a crucial factor. A heavy device can strain your hand and make it challenging to use during teeth brushing or other procedures. It's generally recommended that the weight of a portable device should not exceed 200 g, and lighter is often better. It's worth noting that in models that come with stands (as discussed earlier), the total weight is typically provided, accounting for both the main unit and the stand. The weight of the main unit alone is usually around 1.5 to 2 times less than the total weight.