USA
Catalog   /   Camping & Fishing   /   RC Models   /   RC Cars

Comparison Remo Hobby Mmax Brushless 1:10 vs Remo Hobby 9EMU Brushless Ultimate Edition 1:8

Add to comparison
Remo Hobby Mmax Brushless 1:10
Remo Hobby 9EMU Brushless Ultimate Edition 1:8
Remo Hobby Mmax Brushless 1:10Remo Hobby 9EMU Brushless Ultimate Edition 1:8
Outdated ProductOutdated Product
TOP sellers
Main
Chassis deck is made of metal and plastic.
Model scale1:101:8
Purpose (class)stuntshort-course
TypesUV (monster)truggy
Age14+
Specs
Motorfor injectorsfor injectors
Driveall-wheelall-wheel
Shock absorbersoil-filled
Features
waterproof
metal main pair
metal deck chassis /+ plastic/
waterproof
metal main pair
metal deck chassis
Power source
Power sourceLi-Ion batteryLi-Pol battery
Battery voltage7.4 V7.4 V
Battery capacity3.3 Ah4.2 Ah
Battery model2S2S
Transmitter
Radio frequency2.4 GHz2.4 GHz
Power source4хАА8xAA
General
Wheel diameter118 mm110 mm
Front track310 mm296 mm
Rear track310 mm296 mm
Base length285 mm324 mm
Ground clearance (ride height)45 mm72 mm
Materialplasticplastic
Dimensions (LxWxH)445x310x195 mm
568x193 mm /LxW/
Weight2100 g2320 g
Added to E-Catalogjuly 2019july 2019

Model scale

The scale allows you to estimate the overall dimensions of the model — it describes the ratio of its dimensions to the dimensions of a full-size machine of a similar type (see below). For example, the length and width of a full-sized buggy average about 4 m and 2 m, respectively; this means that for a radio-controlled model on a scale of 1:10, these parameters will be 10 times smaller — about 40 cm and 20 cm (plus or minus).

Miniature scales are considered to be 1:24 or less ( 1:28 and 1:32), while in the largest scales it reaches 1:6( 1:5) — such models are not much smaller than children's cars (however, they are not intended to replace them). A small size is considered optimal for use in residential areas, a large one — in open areas. Most road models (see 'Type') are available in 1:10 scale, SUVs in 1:8, and larger scales are found in advanced internal combustion engine models (see 'Engine'). The most common scale options are 1:14, 1:16 and 1:18, which are found in both the low-cost and high-end segments.

Purpose (class)

- Stunts. Cars of this class are designed for driving and performing various tricks, mainly related to acrobatic performances, jumping and overcoming obstacles. They are characterized by being an off-road type (usually a “monster” or truggy, see below), a powerful engine, high ground clearance, large wheels and reinforced suspension.

Short course. Short-course models are off-road vehicles (buggies, truggies, “monsters”, see below), specialized for cross-country speed racing. They offer good crash and jump protection, a rugged design, a rigid body that covers most of the sensitive parts, and shock absorbers designed to withstand heavy loads.

Drift. Drifting competitions on radio-controlled models involve passing an asphalt track at maximum speed with the constant use of a controlled drift. Based on this, drift cars must have rear-wheel drive, a locking rear differential, and tires with a shallow pattern that are stiffer than most other models. It is worth noting that their appearance can much more accurately replicate real cars than in the case of ring models.

- Ring. A variety of road-type models (see below), designed for passing on flat roads with a hard surface (like asphalt) for a while. A distinctive feature of most of these cars is the smooth, “sleek” shape of the body to ensure aerodynamics (or to...simulate it if the maximum speed is low).

Let us note that professional models intended for competitions and serious car racing usually have one of the specializations listed above. If the class is not specified, the machine most likely belongs to the entry-level and has a purely entertainment purpose (although such models can also have quite advanced characteristics).

Type

Highway. Also known as "touring". These are cars that outwardly copy passenger cars — both ordinary production cars and tuned ones, and even special cars like NASCAR cars. They can have a ring or drift purpose (see above), in general, they have high speed and good handling.

Buggy. Full-size buggy-type vehicles are light all-wheel drive vehicles for off-road driving, primarily sand, with a characteristic body structure (angular panels, open frame elements, safety arcs) and suspension (wheels are most often noticeably moved to the side on the suspension arms). Radio-controlled buggies have a similar design. The body, however, is often stylized as racing cars, but this type of specialization is primarily off-road — for example, many short-course models (see "Destination") are specifically buggies.

Truggy. This class is in many ways similar to the buggies described above, but differs from them in larger wheel diameters, longer suspension arms and increased ground clearance (see below). This may slightly reduce the speed, but increases the throughput; truggies are used for both short-course and trick riding (see Purpose/Class).

SUV (monster). As the name implies, such models copy monster trucks — cars stylized as pickup trucks, the most striking feature of which are huge wheels, powerful engines and corr...esponding chassis features (large suspension travel, high ground clearance). Like the full-size originals, radio-controlled monster trucks are in many ways similar to buggies (see above), and differ from them only in the described features. "Monsters" are relatively poorly suited for high-speed driving, but they have high cross-country ability, due to which models for tricks and short courses are found in this type (see "Destination (class)").

Rally. Such cars are a cross between "touring" and full-fledged SUVs. Outwardly, they are similar to road models, but have significantly more suspension travel, more powerful engines and improved mud protection. At the same time, rally cars are not designed for full-fledged off-road driving, overcoming significant bumps, etc.; their maximum is a dense coating like packed sand or fine gravel.

Crawler. A specialized type of radio-controlled cars designed to overcome obstacles. Externally, the crawlers are somewhat similar to the “monsters” described above, but differ from them in a higher suspension height, which provides a characteristic silhouette: a body raised high on long “legs”. This design allows crawlers to cope with difficult obstacles — like stone scree with steep slopes. Note that the speed characteristics of this category of cars are quite modest, because. the emphasis in them is primarily on high cross-country ability.

Changeling. Models of cars that even turned over will be able to continue moving. At the same time, from different sides, the body of the machine may look different. Such models have good cross-country ability and are considered stunt models (see "Purpose (class)").

Age

The minimum age for which this radio-controlled model is suitable. These recommendations are rather conditional, but it is still not recommended to deviate from them. "Adult" 14+ models with a lot of adjustments, moving parts and power simply will not be able to master a young rider of preschool and maybe even school age. At the same time, models for the younger age category ( 3+, 4+, 5+) may not be interesting and boring for older children ( children 6 and 8+). It is also worth noting that radio-controlled cars are not always children's toys and there are models for modeling, racing — professional use.

Shock absorbers

Type, model and other features of shock absorbers installed in the car. For details on the meaning of this parameter, see "Motor model".

Power source

The type of power source used in a machine with an electric motor (see “Motor”).

- AA. Replaceable elements of a standard size, popularly known as “pen-light batteries”. The main advantage of battery-powered cars over battery-powered cars is the ability to quickly replace dead batteries. On the other hand, the power of such power supply is quite modest, so they are found mainly in models for younger people.

- AAA. Such elements are almost completely similar to the AA described above and outwardly differ from them only in their reduced size (which is reflected in their common name - “little finger”).

- Ni-Mh. Specialized batteries made using nickel-metal hydride technology like other batteries ( Li-Pol, Li-Ion, Ni-Cd, LiFePO4, branded) are superior to replacement batteries in capacity and compactness and are better suited for powerful electric motors. Ni-Mh batteries themselves are notable primarily for their ability to withstand high charge and discharge currents without consequences - the first is important given the “gluttony” of electric motors, the second has a positive effect on the charging speed. In addition, such batteries are resistant to low temperatures, do not h...ave a “memory effect”, and are relatively inexpensive. At the same time, they are inferior to Li-Pol elements in terms of capacity (with the same dimensions).

- Li-Pol. Specialized batteries made using lithium-polymer technology. For more information on specialized batteries in general, see above (Ni-Mh). Li-Pol technology itself makes it possible to create batteries with high capacity, small size and weight, and without the “memory effect,” however, it is quite expensive.

- Ni-Cd. A relatively old battery manufacturing technology, the predecessor of the Ni-Mh described above. The common features of these technologies are resistance to high charge and discharge currents, low temperatures, and low cost. True, nickel-cadmium batteries are subject to the “memory effect” - a decrease in capacity when charging an incompletely discharged battery; however, this can be corrected by using advanced chargers and following operating instructions. But the clear disadvantage of this option is considered to be environmental unsafety during production and disposal; This is typical for all batteries, but it is most relevant for Ni-Cd cells, so they are used less and less.

— Li-Ion. Batteries made using lithium-ion technology and not belonging to any of the universal standard sizes (like AA). Lithium-ion batteries are practically not subject to the “memory effect”, are easy to use and charge fairly quickly. Their disadvantages include a higher price and less resistance to high and low temperatures.

— LiFePO4. Lithium iron phosphate batteries are actually a modification of lithium-ion batteries (see the corresponding paragraph), developed to eliminate some of the shortcomings of the original technology. They are notable above all for their high reliability and safety: the likelihood of a battery “exploding” when overloaded is reduced to almost zero, and in general LiFePO4 can cope with high peak loads without any problems. In addition, they are quite resistant to cold and maintain operating voltage almost until discharge. The main disadvantage of this type is its slightly smaller capacity.

— Branded battery. This category includes all specialized batteries (see subparagraph “Ni-Mh” above), for which the manufacturer did not indicate the manufacturing technology. We also note that if “ordinary” specialized batteries can be standard and can be used in different models of radio-controlled equipment, then branded batteries often have an original design and are designed only for cars from one manufacturer.

Battery capacity

The capacity of the battery supplied with the electric motor model (see "Motor"). Indicated only for variants using original batteries (see "Battery type"), measured in ampere-hours: 1 Ah corresponds to the capacity at which the battery is capable of delivering a current of 1 A for 1 hour.

The higher the capacity of the battery, the longer, usually, the “device” is able to work without recharging. However, the practical time of operation on a charge is largely determined by other characteristics of the machine — scale, purpose (see both points above), weight, model and engine power, etc. Therefore, in most cases, this parameter plays a purely reference role, and it is only possible to compare the battery capacity among themselves with machines that do not have any significant differences in other characteristics.

Power source

The type and number of batteries required for the operation of the model control panel.

— AA. Replaceable cells, known in everyday life as "finger-type batteries". They can be produced not only in the form of disposable batteries, but also in the form of rechargeable batteries. In both cases, they are available in a wide range of items that differ in price and quality, which gives freedom of choice; batteries are sold almost everywhere and are inexpensive. The power and capacity of AA elements are relatively small, but in most cases they are quite enough for normal operation of the transmitter for quite a long time. Usually, modern remotes require several of these batteries — usually 2, 4 or 6.

— AAA. Replaceable cells, known as "mini finger" or "little" batteries. From the AA batteries described above, they differ only in their smaller size and, accordingly, in their capacity; the rest are completely similar. They are mainly used in remotes for inexpensive entertainment models: such remotes do not require a lot of energy, but compactness is sometimes crucial.

— PP3. Replaceable batteries of a characteristic rectangular shape, with a pair of contacts on one of the ends. They have a nominal voltage of 9 V. Such elements are quite popular in "entertainment" models designed for children — not least because only one battery is enough for the remote control.

— Accumulator. In this case, a specialized battery is meant, either of an original d...esign, or in a size that is not related to replaceable elements. These power supplies can be far superior to battery packs in terms of power and capacity, but they are not cheap, and such advanced features are rarely needed in fact. Therefore, battery remotes are found mainly among large-scale professional-level models, with increased requirements for the range and reliability of the transmitter on the remote control.

Wheel diameter

The diameter of the wheels that the machine is equipped with.

In inexpensive " children's " or "entertainment" cars, the size of the wheels, usually, is not indicated at all — this parameter is relevant primarily for professional modellers who pay attention to all the nuances of the design. In general, larger wheels handle various bumps and obstacles better, while smaller ones allow you to achieve higher accelerations and top speeds. Accordingly, for high-speed racing it is better to choose smaller wheels, and for driving on rough terrain and overcoming obstacles — more. Detailed recommendations on a specific wheel diameter for different situations can be found in special sources.
Remo Hobby Mmax Brushless 1:10 often compared