Comparison Navitel R9 vs Navitel R700 GPS Dual

The type of connector used in the recorder to power it. First of all, you should pay attention to this item if you plan to change the registrar with ready-made wiring for one or another type of connector ( miniUSB, microUSB, USB-C, DC 12V). Thus, the replacement of the registrar rests simply on installing a new one without re-changing the cable.

Model of the processor used in the dashcam

The term "video chip" is used mainly for devices with classic capabilities, "processor" — for advanced models with an abundance of non-standard functions. However, anyway, we are talking about the same component — the main computing unit, the characteristics of which directly affect the capabilities of the recorder as a whole. Knowing the model of the processor, you can find detailed data on it and evaluate how satisfied you are with a device based on such electronics. Of the most advanced modern chips, one can name, in particular, Ambarella A7L, Ambarella A12, Novatek NTK96655, Novatek NTK96660 and HiSilicon Hi3516.

— Speed on video. The ability to display data on the current speed of the car on the video being shot - usually in the form of numbers in one of the corners of the frame. As a rule, the device receives speed information from the built-in GPS sensor (see below). This function can be especially useful when analyzing ambiguous situations - for example, as additional evidence that the driver did not violate the speed limit.

— GPS module. Built-in GPS satellite navigation module, which allows you to determine the current coordinates of the device. The specific ways in which this information can be used may vary depending on the other functionality of the registrar. Thus, it is data from GPS that is used to display speed on video (see above), as well as for the operation of the GPS informer and GPS navigator described below. There are other options, sometimes quite original - for example, if you have a 3G/4G modem, a beacon mode may be provided ( GPS tracker - see below).

— GPS informant. A function that provides the driver with various useful information related to the current location. As the name suggests, the location itself is determined using GPS. One of the most popular ways to use an informant is to warn of approaching traffic cameras, stationary post...s and speed control systems that are not detected by a traditional radar detector. In addition, other similar functions may be provided - for example, a message about an area with a high accident rate or a separate large hole on the road. To operate the GPS informer, a database of relevant objects is entered into the device’s memory; When purchasing, it doesn’t hurt to clarify what exactly this database contains, how fresh it is, and whether it allows for updating and manually adding points.

— GPS navigator. The device can operate as a full-fledged GPS navigator. For this, in addition to the GPS module itself, the design provides built-in maps, as well as a fairly large display to display them. This allows you to do without purchasing and using a separate navigator, but this function is not particularly popular in modern DVRs. Firstly, it significantly affects the cost of the device; secondly, a regular smartphone or tablet with GPS is often enough to navigate on public roads; thirdly, recorders most often have rather modest navigation capabilities and are often inferior even to smartphones/tablets, not to mention specialized devices.

— GPS tracker. Another function found in recorders with a GPS module (see above). A GPS tracker allows the device to operate in beacon mode, constantly transmitting data about the location of the car to one or another recipient - for example, taxi service dispatchers, the customer of cargo transportation, etc. Such beacons are also sold as separate devices, but it is easier (and sometimes cheaper) to buy and install a recorder with this function. In any case, it is worth considering that a 3G/4G modem is usually used to transfer data (see below) - so to use the tracker you will have to buy a SIM card and regularly pay for mobile communications.

— GLONASS. The device supports the GLONASS navigation system, the Russian analogue of the GPS described above. Most often, this function is provided in addition to the GPS module: simultaneous use of two systems improves the speed and accuracy of positioning, and also provides an additional guarantee in case of failures in one of them.

—Galileo. European satellite navigation system, created as an alternative to American GPS. Note that it is under the control of civilian departments, not the military. With a full fleet of 24 active satellites, the system provides an accuracy of up to 1 m in public mode and up to 20 cm with the GHA service. Working in conjunction with GPS, Galileo provides more accurate position measurements, especially in densely populated areas.

— Radar detector. A sensor that reacts to the emission of a police radar and warns the driver that the speed may be recorded by the device. Dash cams with this function are classified into a separate category — combo devices (see "Type"). Let's recall that radar detectors are also available as separate devices, however, a combo device takes up less space when installed. On the other hand, the "anti-radar" functionality in combined dash cams is generally somewhat less extensive than in standalone radar detectors. And combo devices are quite expensive (although often cheaper than a pair of a separate dash cam and a radar detector with similar capabilities). It should be emphasized that having this function does not relieve the obligation to adhere to the speed limits prescribed by traffic rules.

— Signature detection. A function of the radar detector described above that improves recognition accuracy and reduces the likelihood of false alarms. To achieve this, samples (signatures) of the emissions of the most popular radar models are stored in the device's memory, and when a signal is detected, the device compares it with the data in memory. In this way, you can quite accurately determine whether the received signal is radar emission (and which one) or merely an outside interference. The drawbacks of detectors with signature recognition include relatively high cost, slightly increased triggering time,...and inability to "recognize" radars not stored in memory (however, some models allow signature database updates).

— Parking mode. A special mode that allows recording extraordinary events on video while the vehicle is parked; it uses a G-sensor for operation (see "Shooting functions"). In parking mode, the dash cam is in "sleep" mode, and if the G-sensor detects an impact, full recording is activated. Videos from the buffer are "attached" to the start of the recording, allowing not only the moment of the incident to be recorded but also a few seconds before it.

— Motion sensor. A dash cam function based on detecting movement in the camera lens. Thus, if the dash cam "understands" that there is movement in the frame, automatic recording takes place. This allows the dash cam to be set to automatically turn on when movement starts, as well as to record possible incidents, thefts, car hijackings in parking areas that come into the device's field of view.

— Voice control. The ability to control the dash cam through voice commands. The specific list of such commands (and supported languages) can vary depending on the model. However, in any case, this function contributes to driving safety: it allows you to keep your hands on the wheel and not get distracted from the road while controlling the dash cam.

— Gesture control. The ability to control the device using gestures. Note that the capabilities of such control in dash cams are significantly limited: typically, a sensor is used that responds to hand movement in front of the device and is capable of performing only one specific action. Nevertheless, even this possibility provides additional convenience and safety (compared to pressing buttons and especially navigating menus): a hand movement takes fractions of a second, and the driver is hardly distracted from the road. As for specific functions implemented through gesture control, they may include protecting the recorded clip from being overwritten, saving a snapshot, turning off the radar detector sound (see above), etc. In some models, such a function is rigidly set in the settings and cannot be reconfigured, while in others, you can choose from several options.

— Wi-Fi module. The Wi-Fi technology is mainly known as a method of wireless Internet access, but it can also be used for direct connection with another device. The ways of using this technology in dash cams can vary, depending on the functionality. For instance, some models can update map markers for a GPS navigator and GPS informer database through such a connection (see above); others allow uploading recorded videos directly to the Internet (for example, to YouTube); and the most advanced devices with this feature have touch screens and can even be used as full-fledged tablets when removed from the mount, with the ability to browse web pages and install various applications. There are also quite specific features — for example, streaming recorded or captured video to a smartphone or tablet, sharing mobile Internet with other devices (if a 3G/4G module is available), and so on. It is worth noting that the number of public Wi-Fi access points is constantly increasing, they are available at most major gas stations, and are often provided in certain areas of large cities (parks, historical and business districts, etc.). Therefore, accessing the World Wide Web from a dash cam without removing it from the car can be much easier than it seems at first glance.

— 3G/4G modem. A 3G or 4G mobile communication module. Primarily intended for data transmission — in simpler terms, for mobile Internet use; voice calls for dash cams are considered redundant and, as a rule, are not supported. The speed of connection in modern mobile networks is often comparable to that through Wi-Fi; thus, the applications of 3G/4G connectivity can be quite diverse, depending on the specific model. However, three functions are most frequently encountered: downloading information about traffic jams and other relevant data (updates for GPS informers, weather forecasts, etc.); functioning as a GPS tracker (if this feature is available — see above); and as a Wi-Fi hotspot, sharing mobile Internet with other devices (with a built-in Wi-Fi module, of course). Comparing 3G/4G and Wi-Fi, mobile communication is available almost everywhere; however, it comes with costs.

— Bluetooth. Having a built-in Bluetooth module in the dash cam. This technology is used for direct wireless connections with other devices; its application can vary, depending on the functionality of a particular dash cam. One of the most popular applications is streaming audio to a Bluetooth-compatible car stereo or the driver's headset: this can include various notifications from the navigator, radar detector, etc., signals from the "Anti-Sleep" system (see above), and in some models — even music from the built-in player. Another popular use form is file exchange with a smartphone, laptop, or other similar device (primarily for copying recorded materials). Besides this, other more specific usage modes for Bluetooth might be envisioned. It is worth noting that most dash cams with this function operate on Android (see the corresponding point), so the range of options is quite extensive — essentially limited by the range of compatible apps.

— Speaker. A built-in speaker installed in the dash cam housing. This speaker can be used to play, for example, audio during recorded video playback, voice prompts from the GPS navigator/informer, radar detector signals (see above), etc. However, keep in mind that the speaker’s volume might be relatively low, and listening via the speaker in a noisy environment might be challenging.

The maximum video resolution supported by the optional DVR camera. Depending on the design and configuration, we can talk about both a remote camera and a camera for filming the interior (see above for both); this nuance should be clarified separately.

The higher the resolution, the more detailed the image from the camera will be, the more small details will be normally visible on it. On the other hand, high detailing affects the volume of materials to be filmed and the requirements for the “hardware” of the registrar (and, accordingly, affects the cost).

In general, additional cameras of modern recorders can be divided into the following categories:

— SD. "Standard" resolution (as opposed to HD — "high resolution"). A rather modest frame size, which at the same time allows you to significantly save memory for video recording and is suitable even for low-cost recorders. Specific resolution options include, but are not limited to, 628x582, 640x480, and 720x480.

— HD 720p. The traditional, most popular resolution for this video recording standard is 1280x720. In addition to it, registrars also found 960x720 (aspect ratio 4:3) and reduced in height 1280x480. HD is the most modest of today's high-definition standards, but still provides pretty decent detail.

— Full HD 1080p. The "classic of the genre" for this standard is the resolution of 1920x1080, however, there are other values in registrars, including very speci...fic ones — such as 1440x1080 (4:3 aspect ratio) and 1920x540 (halved vertical resolution). This is a fairly solid indicator even for the main camera of the registrar, and there is no need to talk about additional ones.

— Super HD. Not a particularly popular standard in video technology, which, nevertheless, has found application in video recorders. Most often provides a resolution of 2304x1296, which provides even more

Viewing angle of the additional dashcam camera. Depending on the design and configuration, it may refer to either an external camera or an interior camera (see above for both); this nuance should be clarified separately. The viewing angle can be specified both horizontally and diagonally, which is why models with the same figures in the specifications may slightly differ in their actual field of view. However, in this case, this difference is not critical.

In theory, a wider viewing angle allows for capturing a larger area, but individual details in the frame become smaller. Additionally, wide-angle lenses can cause geometric distortions at the edges of the image; the DEWARP technology (see "Features") used to eliminate them is usually not used in additional cameras.

AV connector for connecting an additional remote camera to the DVR, which can be used to provide a view of the rear hemisphere or filming what is happening inside the vehicle.