Comparison Vitals Master AZT 3603a SmartLine vs Dnipro-M DTC-200BC Dual

The capture width provided by the unit, in other words, the width of the strip of land cultivated in one pass. In fact, this size corresponds to the width of the working nozzle.

The large working width is useful when processing large open spaces, as it allows you to finish the job in a small number of passes. On the other hand, for hard-to-reach places, relatively narrow tools are better suited, able to go where a wider unit will not fit. In addition, the width of the tool directly affects the weight and price.

In general, it makes sense to compare in terms of working width only units of the same type (see above). However, it is worth noting here that trimmers do not differ so much from each other — most models capture from 25 to 45 cm (and a wide processing band is provided by moving the nozzle from side to side). As for the other types, in the most modest models the capture width does not exceed 40 cm, in the heaviest and most powerful it can be 56 – 60 cm or even more(in mini tractors — up to 1.5 m).

The width (diameter) of the trimmer knife characterizes the size of the paddle knife (or saw blade). Such a nozzle has a smaller capture width than a fishing line, however, it allows you to mow more dense thickets, including shrubs.

The diameter of the fishing line supplied with the trimmer (more precisely, with a reel attachment, see "Tips").

In modern models, this parameter can be from 1 to 4 mm. At the same time, a thicker fishing line handles better with dense thickets, but it works rougher, the treated lawn is not particularly even, and for the effective operation of such a nozzle, a fairly powerful engine is needed. On the other hand, a fine line provides a clean and neat cut, but is not suitable for heavy vegetation and large stems. Thus, thick fishing line is usually equipped with powerful units designed for "launched" lawns with an abundance of thick stems. Thin, on the other hand, is found mainly in low-power electric trimmers with a lower engine location, designed for neat lawns with regularly cut grass.

We also recall that many trimmers have the ability to replace the standard reel with another one that differs in line thickness.

— Adjustment of an inclination of a bar. The ability to tilt the bar or the working head relative to the bar. The setting will come in handy for mowing grass in hard-to-reach places. Trimmers with this function are much more convenient to work under swings, benches and garden furniture. Also, by adjusting the inclination of the rod, you can adjust the grip of the trimmer to the height of the user.

- Telescopic rod. The possibility of increasing the length of the trimmer by lengthening the bar. Due to the design features, this solution is available only for models with a lower engine and helps to maximally adjust the device for a person of any height.

- Collapsible bar. The ability to disassemble the trimmer bar into several parts. This feature greatly simplifies storage and transport: it is easier to pack, carry and transport components folded side by side than a solid long rod. Theoretically, this design is less reliable than non-separable, however, trimmers are usually not subjected to such high loads that this is noticeable.

- Shoulder strap. Strap for carrying the trimmer on the shoulder - including during operation. This design significantly simplifies the operator's task and reduces fatigue: carrying on the shoulder is not as tiring as holding it in the hands of weight. Note that in models without a sho...ulder strap, it may be possible to purchase it separately; however, it is easier (and often cheaper) to buy a tool with this accessory right away.

— Restrictive bracket. The bracket acts as a limiter and is designed to protect high (necessary) vegetation from mowing. Those. you can put forward a small structural element at the base of the bar, which, approaching the bushes, will move them away, thereby not cutting them off. The bracket will also be appropriate when mowing a site with a fence, a decorative landscape with many elements that can be damaged during mowing, or they themselves can “shorten” the fishing line once again by breaking off its ends.

- Swivel head. Possibility of rotation of a working nozzle of a trimmer on a bar. Typically this function is used to change the cutting system from a horizontal position to a vertical position. Cutting in a vertical plane can be useful, for example, for leveling edges and forming borders on lawns.

- Edging roller. The roller is necessary for a neat "haircut" between the lawn and the sidewalk. It is found in models with a swivel head and is designed for more comfortable work. Since the device does not need to be suspended, it is much easier to frame flower beds, decorative elements on the lawn, borders, etc., relying on the roller.

- Support rollers. Special rollers mounted on the cutting head of the trimmer. Thanks to these rollers, you can rest the head on the ground and roll the tool in front of you - this is more convenient than carrying it "on yourself". Another advantage is that the rollers keep the working attachment at the same height, which means that mowing is as accurate as possible, almost like using a conventional lawn mower (with all the advantages of a trimmer). The main disadvantages of models with rollers are the high cost, as well as the increased weight, which makes it difficult to work “off the ground”.

The maximum speed that the engine in an electric mower can run at (see "Engine type").

It makes sense to compare according to this indicator only engines of the same power. In general, higher rpm improves performance but reduces torque. Conversely, a relatively slow engine will be inferior to a “fast” one in overall speed, but it will better cope with dense dense vegetation. So it’s worth choosing by engine speed, taking into account what is more important to you — speed or efficiency in difficult conditions.

The presence of a soft start system in the lawn mower engine.

The design features of electric motors are such that when power is applied directly, the start occurs very abruptly — both in a mechanical and electrical sense. Firstly, the engine itself spins up in a jerk, in a very short time, which increases the wear of its parts. Secondly, at the moment of start-up, there is a sharp jump in current strength, which creates significant loads on the power grid (or the batteries of the unit). The soft start system eliminates these phenomena: it limits the starting current, allowing the motor to accelerate smoothly and preventing voltage surges.

On the other hand, additional electronic circuits affect the cost, sometimes quite significantly. So there are few models with this feature nowadays, and you should pay attention to them mainly in cases where the mentioned advantages are of fundamental importance — for example, if the device is purchased for a house with weak wiring that does not tolerate voltage surges.

The name of the battery platform supported by the device. A single battery platform is used to combine various power tools of the same brand (drill, grinder, saw, etc.) into one line. Devices on the same platform use interchangeable batteries and chargers. Thanks to this, for example, there is no need to select a battery for each individual model of a power tool, because one purchased as a spare battery can be used in various power tools, depending on the situation or as needed. Batteries of the same platform basically differ from each other except perhaps in capacity.

Nominal voltage of the battery used in the unit with the corresponding engine type (see above). Theoretically, a higher voltage allows you to achieve more power, but in fact there is no direct relationship between these points. In addition, manufacturers choose batteries to deliver the intended power, rotational speed, and other performance. Therefore, in the selection and normal use of the unit, this parameter has a secondary, reference value; it may be needed mainly for some specific tasks, for example, searching for a spare battery or a “non-native” charger, or comparing different batteries by capacity (see below).

The name of the battery that is compatible with the device. It helps to buy a spare or find a suitable one in case of a breakdown of the main one.