Qty per pack
The number of individual batteries supplied in the kit.
Buying a multi-cell kit is convenient when you need more than one battery, but it is especially justified when you need several batteries for one device. In such cases, it is desirable that these cells are identical in characteristics and condition (it is not recommended to use fresh batteries in conjunction with discharged ones); Batteries from one set usually satisfy these requirements.
Capacity
The rated capacity of a battery is the amount of energy it can store.
This parameter directly determines how long the power supply can operate with a particular load. However, when assessing capacity, there are two things to consider. First, the capacitance rating is usually specified for a specific discharge power. So, for salt and alkaline full-size batteries (see “Technology”), this power is measured in tens of milliamps. But if it is significantly exceeded (on the order of hundreds of milliamps), the actual capacity of the battery may decrease significantly compared to the declared one. Therefore, for example, it is not recommended to use disposable batteries in digital cameras - the power consumption in such equipment can exceed 1000 mAh, and NiMh batteries cope best with such a load. And miniature silver-zinc batteries of the “300” series (SR) are available in two versions - for high and low discharge power; CR series button batteries can have a similar low-power version (for more details on both, see “Size”). More detailed information on discharge currents for different types and sizes of batteries/accumulators can be found in special sources; and in some cases (mainly for lithium-ion batteries) it is directly specified in the characteristics (see “Nominal discharge power”, “Maximum discharge power”).
The second caveat is that the actual energy reserve depends not only on the number of milliamp-hours declared, but also on the operating voltage;...so you can only compare by numbers in mAh batteries/accumulators with the same voltage (in extreme cases, with a similar voltage, for example, 3 V and 3.6 V). However, other comparisons are rarely required in practice.
Charge cycles
The number of charge cycles that the battery can withstand without noticeable deterioration in performance.
The charge cycle refers to the period of time from one complete discharge of the battery to another, when the battery is first fully charged and then discharged to zero. In practice, this method of operation is relatively rare - much more often the batteries are charged under-discharged, and sometimes the process has to be stopped before the charge is replenished to 100%. In addition, the number of charge cycles is usually indicated for ideal operating conditions: a “native” charger, a relatively low load during operation, compliance of the ambient temperature with operating parameters, etc. Therefore, the number of cycles indicated in the specifications is quite approximate, and in practice it is unlikely that you should expect a 100% exact match. Nevertheless, by this parameter it is quite possible to evaluate the durability of the battery and compare it with analogues.
Protection board
Built-in electronic circuit that protects the battery from operating conditions.
This function is found mainly in lithium-ion batteries (see “Technology”). This is due to the fact that such batteries have fairly strict charging and discharging rules; violation of these rules (primarily overcharging and overdischarging, as well as overcurrent) can lead not only to battery failure, but also to fire and even explosion. To avoid such troubles,
protection boards are used: they primarily control the charge level, as well as charging and discharging power.
This feature is highly recommended if the battery is to be used in a device that does not have its own battery controller. A striking example is electronic cigarettes with mechanical battery mods, in which the atomizer coil is connected to the battery virtually directly. Without a protection board, the customer must carefully control the operating mode himself - and this is not so easy, given the absence of any additional indicators in the same “mechanical mode”.
On the other hand, it is worth considering that this function affects not only the cost, but often also the dimensions of the battery - it can increase its length by several millimeters beyond the nominal size. For example, 18650 elements with a protection board are not 65 mm long, but about 68 mm. In some cases, this can create problems with installation, or even make it impossible. So if the device fo
...r which the battery is purchased has its own protection circuits, the optimal choice for such a load would be a regular, “unprotected” power source.
