Comparison Xiaomi Smart Camera C400 vs Xiaomi Smart Camera C300

— LAN. The LAN (Ethernet) interface was originally designed to build wired computer networks. Cameras with such a connector, as a rule, also work as network devices. The advantage of this option over the Wi-Fi described below is a higher actual throughput, over BNC — the ability to connect without additional equipment, directly to a standard network router used for a regular computer network. Of the disadvantages, one can note only the need to pull a wire, but this point is common to all wired connection options. In terms of other features, LAN is the most convenient, due to which it has become widespread in modern surveillance cameras.

— Wi-Fi. Wi-Fi connection was originally a wireless analogue of the LAN described above and was used to connect to computer networks. When working in such networks, this connection is similar to LAN in the sense that it allows the camera to work through a regular router (of course, supporting Wi-Fi). At the same time, Wi-Fi is more convenient due to the absence of wires, but with an abundance of other wireless devices connected to the router, the channel throughput and image quality can significantly deteriorate. Note that recently it has also been possible to use this connection in Direct mode - for direct connection of the camera to another device, for example, connecting the camera to a smartphone (see "Design and capabilities -...P2P"). However, this option is less common.

— BNC. Abbreviation for Bayonet Neill Concelman. A bayonet-type connector, usually used to transmit an analog video signal. Refers to professional video interfaces; special equipment is required to work with such a camera. However, cameras with this type of connector are usually in the lower price range. This is due to the limited connectivity options via BNC — it can only transmit a video signal, which limits the functionality of such cameras compared to models that work via LAN or Wi-Fi (see above).

— Aviation port. It is a round multi-pin connector designed for reliable connection of cameras. Such ports provide a stable connection even in conditions of vibration and high humidity, due to which it is used in car video surveillance systems. Power, video signal and control (for example, for PTZ cameras) can be transmitted through one aviation port, which simplifies installation and reduces the number of required cables.

— 3G / 4G. Connecting to the Internet via 3G / 4G mobile networks; as a rule, this requires installing a SIM card from a mobile operator in the camera. The speed of such networks allows, among other things, to broadcast video in fairly high resolution. So such a connection (of course, if there is coverage) is well suited not only as a backup option in case of Internet outages, but also as the main communication channel if there is no fixed Internet connection at all. A typical example of the second situation is monitoring a country house located “far from civilization”, but in an area with reliable mobile phone reception. In both cases, you can contact the camera via the Internet from anywhere on the planet.

Camera sensor resolution in megapixels (millions of pixels).

The higher the resolution of the matrix, the higher the video resolution can be (see below), the more detailed the image is capable of providing the camera. At the same time, note that as the number of megapixels increases (without changing the size of the matrix), the size of each individual pixel decreases, which increases the likelihood of noise and deterioration in the overall image quality. Therefore, high resolution in itself is not necessarily a sign of high quality — a lot depends on other things, for example, on the size of the matrix (see above).

As for specific values, in the most modest matrices it does not exceed 1.3 MP, which corresponds to the maximum HD resolution. 2 MP sensors allow for already Full HD resolution (usually 1920x1080 or 1600x1200), 3 MP, 4 MP, 5 MP and 6 MP are capable of better resolution, but still do not reach 4K, which is typical for 8 MP.

The maximum video resolution that the camera can capture.

The higher the resolution of the video, the more details you can see on it, the less details will be blurry. On the other hand, high resolution means large volumes of video materials, which, accordingly, requires capacious media for their storage and fast communication channels for broadcasting video in real time. Yes, and this indicator significantly affects the cost of the camera.

Aperture of the lens installed in the camera.

Aperture characterizes the degree of attenuation of the light flux when passing from the front lens of the lens to the matrix. It is denoted as the ratio of the diameter of the active aperture of the lens to the focal length, while the size of the active aperture is designated as f and is taken as a unit — for example, f / 1.4 or f / 2.0. Moreover, the smaller the number in the designation, the higher the aperture (in our example, the second lens will be darker than the first). And for lenses with a variable focal length (see "Focal"), the actual aperture, usually, changes with a change in focal length; for such models, either the range of aperture values, or its maximum value, can be indicated.

By itself, this parameter characterizes, first of all, how light the image taken through the lens turns out, all other things being equal. High values are important, first of all, when shooting in low light conditions: a fast lens allows you to get a fairly high-quality image without increasing the sensitivity of the matrix, which is fraught with noise and “blurring” of the picture. On the other hand, the actual quality of camera operation (including in dark conditions) also depends on many other factors — the type and size of the matrix, signal processing features, etc. Therefore, aperture in most cases is more of a reference than a practically significant parameter.

The ambient temperature range in which the camera can be used normally.

All modern surveillance cameras normally tolerate temperatures typical for houses / apartments, offices and other premises with similar mild conditions. Therefore, it is worth paying attention to this parameter, first of all, if the device is planned to be used outdoors — or in a room where the temperature does not differ much from the street temperature or, for technical reasons, should be low (freezer warehouse, refrigerated car, etc. ). In such cases, the lower temperature threshold is especially important: for example, almost all outdoor cameras have the ability to work in cold temperatures below 0 °, but among indoor models such features are much less common. However, frost-resistant devices(with an allowable temperature of -40 °C and below) can also be found not only among outdoor cameras, but also among “internal” cameras.

As for the upper temperature limit, it is usually not lower than +40 °C, which is quite enough for using the camera in a temperate climate. In some models, this limit reaches +50 °C and even +60 °C, making them suitable even for hot countries. However, note that we are talking exclusively about use in the shade; the possibility of working under direct sunlight should be clarified separately.