Comparison Bosch WQG 245AP PL vs Bosch WTW 8546K PL

The internal volume of the dryer drum.

A larger drum can accommodate more laundry, but there is no rigid dependence here: models with the same volume may differ in maximum load. It is because to process a large mass of laundry, one need not only a capacious drum but also an engine of appropriate power. At the same time, in a larger drum, the same mass of laundry will dry more efficiently than in a small one, because laundry will be more freely distributed over the drum, crumpled less, and warm air will better penetrate the folds of the fabric. As a result, for the same drum volume, a model with a smaller load will be more efficient and performant than a model with a larger load. On the other hand, a volumetric drum takes up more space and the dimensions of the dryer are largely determined by the dimensions of the drum.

The number of preset drying programmes. Such programmes are often optimized for a specific type of fabric: linen, silk, synthetics, etc. The more drying programmes, the more versatile and easier the dryer is to use. However, a specific set of modes in different models may be different, and even a large variety of programmes does not guarantee that one of them will be suitable. So before buying, it is advisable to specify not only the quantity but the list of claimed programmes.

This function of the dryer prevents the formation of the crease on the laundry as much as possible, which facilitates subsequent ironing. Of course, anti-crease function does not give a full guarantee against creasing, but it noticeably makes life easier for the user. Especially when working with fabrics like linen or in cases where the things themselves are not particularly wrinkled but can crumple with inaccurate drying.

This function allows you to pre-load laundry into the dryer and set the start time so that drying ends at the most convenient time, for example, when you will be at home and can immediately unload the laundry to avoid unnecessary creases on it. The range and accuracy of the timer adjustment can be different, but even in the simplest models, time can be set within a few hours in increments of 10-15 minutes — this is quite enough for most cases.

Quick dry programme that dries in a relatively short time. It saves time, but the laundry wears out more than during normal drying and is not suitable for delicate types of fabric.

Only condenser dryers have such a tank (see "Drying type"). The larger the tank, the less often you have to get rid of the accumulated liquid. At the same time, in most models, the volume of the condensate tank is standard — about 5 – 6 litres: this is considered the best compromise between capacity and dimensions.

The shape and design of the door used in the dryer.

— Round. The round door is made of opaque material. In general, round openings and covers for them are simpler and cheaper to manufacture than rectangular ones, which is why they are much more common. With similar dimensions, they have a smaller area. However, the round loading hatch is made quite large and does not cause problems if it is necessary to place a large object such as a duvet cover or sheet in the dryer. Opaque doors are as simple and cheap as possible but not very convenient. They do not allow you to see the contents of the machine when the door is closed. And this is important for many users (see below for more details).

— Round with glass. A round-shaped door with an insert made of transparent material — usually plexiglass or other similar plastic (ordinary glass is less reliable and is not used in dryers). The general features of the round door are described above, and the transparent insert allows you to see the contents of the drum without opening the lid — including observing the drying process itself. Such an observation provides more general comfort and reassurance than any practical benefit; however, even these moments are important when using household appliances. In addition, there are quite practical situations in which transparent inserts can come in handy — for example, when you need to make sure that unnecessary things do not get into the drum and it would be inconvenient...to interrupt the programme and open the hatch. Such doors are somewhat more expensive than opaque ones, but the advantages described are often decisive. As a result, this option is the most popular in modern dryers.

— Rectangular. Rectangular opaque door. A door of this shape gives the user more space to load laundry than a round one; theoretically, this can be useful for numerous items, especially large ones. At the same time, this advantage is not decisive, rectangular doors are somewhat more expensive, and an opaque door is also not very convenient, at least from a psychological point of view (and often from a practical one). Because of this, this option is extremely rare.

— Rectangular with glass. Rectangular door with a transparent insert made of plexiglass or other similar material. Doors with glass are somewhat more user-friendly than opaque ones (see "Round with glass" above for more on this), so this option is more common than opaque rectangular doors. However, this form is still more expensive than the round one and is used much less frequently.

The direction in which the door of the dryer opens.

Most users are right-handed, so from this point of view, the best option is leftward opening — the free space for loading and unloading laundry is just under the right hand. However, specifically in dryers, the rightward opening is noticeably more common. It is because such units usually complement washing machines and are most often installed side by side. And in most washers, the door opens just to the left (again, based on convenience for right-handed people). Therefore, it is most convenient to place the dryer on the right and equip it with a hatch that opens to the right — this will allow you to overload the laundry from washer to dryer with minimal effort and time. And vice versa, if the door in the washing machine opens to the right, then it is better to choose a dryer with a leftward opening and install it on the left.

Sometimes both machines are installed as a column — a dryer on top of a washing machine. In such cases, the hatches of both machines should open in one direction — this is more convenient both from the point of view of ergonomics and purely psychologically. Moreover, if the "column” adjoins the wall sideways, then the opening should also occur towards the wall; otherwise, the laundry will have to be loaded and unloaded through the space between the open hatch and the wall, which can be very inconvenient....

Note that in some dryers both opening options are claimed. It usually means that the door has a reversible mount, and the direction of opening can be chosen at your discretion. However, this feature does not hurt to clarify before buying.