USA
Catalog   /   TVs & Video   /   TV Mounts & Stands

Comparison 2E 1MCBUSB vs 2E 1MGS

Add to comparison
2E 1MCBUSB
2E 1MGS
2E 1MCBUSB2E 1MGS
Outdated ProductOutdated Product
TOP sellers
Main
The mounting design has a USB hub with two USB 3.0 connectors
Typedesktop mountdesktop mount
Installationuniversaluniversal
Specs
Minimum size17 "19 "
Max. size43 "32 "
Max. weight18 kg9 kg
Adjustments
for curved TV
tilt
turn
depth adjustment
slide
rotation
height adjustment
for curved TV
tilt
turn
depth adjustment
slide
rotation
height adjustment
Angles and dimensions
Upward tilt angle40 °45 °
Downward tilt angle40 °70 °
Turn angle180 °360 °
Rotation angle180 °360 °
VESA
75x75mm
100x100 mm
200x200mm /with complete adapter/
75x75mm
100x100 mm
 
General
USB hubUSB 3.2 gen1 2 pc
Cable management
Color
Added to E-Catalogmay 2021may 2021

Minimum size

The minimum TV screen size that can be mounted on the stand/mount. It is usually indicated for structures with mounts, for stands this parameter is irrelevant (for more details, see "Type"). The parameter is not absolutely accurate, because technically, TVs with a smaller size can fit the mount; however, in general, it allows to evaluate the scope of a particular model of mount/stand.

Max. size

The maximum size of the TV screen that can be installed on the stand/mount. Like the minimum size (see above), it is in some way a conditional indicator — TVs with a larger size can also fit for the mount, and then the main determining parameter will be the maximum weight (see below).

Max. weight

The maximum weight of the TV that can be installed on the mount/stand; more specifically, it is the maximum weight that the mount/stand can support for an indefinitely long time without any negative consequences. Unlike the screen size described above, this parameter is accurate and should not be exceeded: perhaps the stand/mount will not break immediately under excess weight, but this can happen at any time, and such a breakdown is not covered by the warranty.

It is worth considering that for classic stands with several shelves (see "Type"), the maximum wheight is usually indicated for the entire structure as a whole and is the sum of the loads for each individual shelf. Thus, the maximum weight of the TV is not limited by the total maximum wheight, but by the maximum wheight for one shelf. This does not apply to stands with mounts; they usually list the maximum wheight on the mount, in which case it corresponds to the maximum weight of the TV.

The screen size is directly related to the maximum wheight (after all, a large TV weighs more). Typically, for screens up to 24", structures with a maximum wheight of about 5-6 kg are usually quite enough, for a 32" device, about 12 kg may be needed, large 55" screens reach a maximum weight of about 25-30 kg, and in the case of plasma panels, these figures increase by 1.5-2 times However, anyway, before choosing, you should clarify the weight of the specific TV model for which the stand/mount is selected.

Upward tilt angle

The maximum upwards tilt angle from the vertical of the installed screen. The larger the tilt angle, the wider the adjustment possibilities, however, in fact, an angle of more than 5° is rarely required.

Downward tilt angle

The maximum downward tilt angle from the vertical for the installed screen. As with the upward tilt angle, the larger this angle, the wider the adjustment possibilities; however, downward tilt is usually required more frequently (the TV may be installed under the ceiling), and its angle can be as high as 15-20°.

Turn angle

The angle within which the screen installed on the mount can rotate. Measured from far left to far right. In modern models, it can reach 180°.

Rotation angle

The angle within which the screen installed on the mount can rotate. Rotation refers to turning around a horizontal axis perpendicular to the screen; see "Adjustments" for details. And the angle is usually indicated from one extreme position to another.

According to this parameter, two categories of mounts can be distinguished. In one of them, the rotation angle is small — about 10 – 15 ° — and this feature is mainly intended to compensate for inaccuracies made during the installation of the structure: even if the mount hangs slightly unevenly, rotation allows you to set the screen straight. The second variety is models with a rotation angle of 180° and above (up to 360°); they allow user to rotate the screen from landscape to portrait and vice versa.

VESA

VESA is generally accepted standard for most modern screens (TVs, monitors, plasma panels) and is found in all types of stands/mounts, except for classic stands (see "Type"), where the TV is placed on its own stand. Any such mount has 4 screws arranged in the shape of a rectangle (square). However, the size of this rectangle can be different, it depends primarily on the weight, and, accordingly, the size of the screen. The smallest mount today is 50x50 mm, it is designed for very miniature models; 100x100 mm can already hold TVs of about 24", 200x200 mm — 32", and in larger models, the size of the mount can reach 800x400 mm. Many mount/stand models have holes for several VESA standards.

The following sizes of VESA mounts are currently on the market: 50x50 mm, 75x75 mm, 100x100 mm, 100x200 mm, 200x100 mm, 200x200 mm, 200x300 mm, 200x400 mm, 300x200 mm, 300x300 mm, 300x400 mm, 400x200 mm , 400x300 mm, 400x400 mm, 500x400 mm, 600x400 mm, 600x600 mm, 700x400 mm, 800x400 mm, 800x600 mm, 800x800 mm, 900x400 mm, 900x500 mm, 900x600 mm, 1000x500 mm, 1000x600 mm.

USB hub

A set of additional USB ports provided in the design of the stand or mount. Brackets with a USB hub allow you to covertly lay wires, they are also used to connect flash drives and various peripherals. In some cases, the hub has an autonomous power source, so you can power all kinds of USB gadgets from it. Typically, a USB hub includes two or four USB 3.2 gen1 ports.
2E 1MCBUSB often compared
2E 1MGS often compared