Comparison Ulanzi MT-33 vs Ulanzi MT-11

The minimum height relative to the base at which the tripod base can be mounted.

The lower the minimum height, the better the tripod is suitable for macro and product photography; in addition, the range of height adjustment available to the user depends on this indicator. Note that for models with the ability to flip the boom (see below), the minimum height is given for the traditional position of the boom, platform up. And if the claimed minimum is significantly less than the length of the tripod when folded (for example, 15 cm with a length of 50 cm), this means that the legs can “spread” to a horizontal position or close to it, thus lowering the entire structure.

The maximum height from the base on which the tripod base can be mounted.

For desktop use (see "Installation"), a large height is not required, therefore, in most of these models, this figure does not exceed 20 cm — the only exceptions are some specific monopods. Accordingly, the difference in height between different desktop structures in most cases does not matter much. But in the floor models, the most "undersized" have a maximum height of about 40 – 50 cm, and the highest ones are able to open up to 2.5 m and even higher. In such cases, the choice should take into account the specifics of use. So, it makes sense to specifically look for a model at 150 – 160 cm if it is fundamentally important to install the camera at eye level (eye level is usually about 10 cm lower than a person’s height). At the same time, most camcorders and many cameras have swivel screens that allow you to comfortably look at the device from top to bottom; and even in the absence of such a screen, bending down to the level of the camera is not so difficult. And it makes sense to pay attention to tripods with a height of 170 cm and above mainly in those cases when shooting over heads is planned — for example, reports from public events.

The ability to attach various additional equipment to a tripod — a flash with a reflector or another light source, a light metre, a gadget like a smartphone, etc. This feature will be useful for professional use, where a camera alone is not enough — in particular, for studio shooting. In some cases, a tripod is the optimal location for additional equipment. At the same time, the mounts for auxiliary devices themselves may not be included in the delivery package, this point should be clarified separately.

The ability to remove the tripod head and replace it with another if necessary. This makes the tripod more versatile: for example, you can shoot panoramic images using a 2D head (see "Type of head"), and at the right time you can replace it with a ball head, which is more suitable for operational shooting. Detachable head is considered mandatory for professional tripods.

In tripods with this function, the head has a special plate (platform) with a mounting screw for the camera, installed in the mounts, which ensure its quick removal and re-installation on a tripod. This design increases the efficiency of work: it is enough to screw the platform to the camera once, and installing / removing the camera (together with the platform) will be much faster and easier than if you had to screw it back to the tripod itself every time. Removable platform is considered mandatory for professional tripods.

The main material used in the construction of the body or legs (depending on the type) of a tripod.

— Plastic. The main advantage of plastic is its low cost, due, among other things, to ease of processing and suitability for creating parts of complex shape. In addition, this material can be flexible, have any colour, and even become transparent. On the other hand, its strength is significantly lower than other tripod materials; it is more than enough to work with light weight, however, plastic is not suitable for supporting massive equipment and creating long supports that are subject to significant bending loads due to the large length. Therefore, the main scope of this material today are clamps and small table stands, including flexible design (see "Type").

— Aluminium. Aluminium-based alloys have a combination of high strength and low weight, making them well suited for the construction of tripods of any format — including and classic full size. The cost of this material, however, is somewhat higher than that of plastic and steel, but not by much, and the mentioned advantages more than cover this drawback. Because of this, this material is the most popular in modern tripods, it is widely used in almost all types and price categories.

— Steel. Steel is characterized by high strength — even higher than that of...the aluminium alloys described above, at a slightly lower cost. At the same time, this material has a rather large weight. On the one hand, this contributes to stability, on the other hand, it makes it difficult to carry from place to place. And although the latter is relevant mainly for floor tripods (see "Installation"), however, even in compact desktop models, steel is still rarely used.

— CFRP. The most advanced of the materials used for modern tripods. Carbon fibre, or carbon fibre, is a composite composition of carbon fibers filled with a filler — usually a special resin. In terms of strength characteristics, this combination is comparable to steel, while this material weighs very little, which is especially useful for full-size tripods. Its main disadvantage is the high cost, which is why professional premium models remain the prerogative of carbon fibre. In addition, carbon fibre requires fairly careful handling due to its sensitivity to point impacts — cracks easily appear from them.

— Metal. This option is indicated in cases where the manufacturer, for one reason or another, did not specify the composition of the metal in the characteristics. Most often, this refers to aluminium or steel, the properties and features of the use of both are described above; however, other types of metal may occur. Anyway, when assessing the reliability and durability of such a tripod, it is best to focus on its price category.

— Carbon. Another name for the CFRP described above; used by some manufacturers for the sake of brevity and "solidity of sound".