USA
Catalog   /   Large Appliances   /   Integrated Appliances   /   Garbage Disposals

Comparison Teka TR 550 vs Teka TR 50.2

Add to comparison
Teka TR 550
Teka TR 50.2
Teka TR 550Teka TR 50.2
Compare prices 1
from $180.00
Outdated Product
TOP sellers
Power0.55 hp0.5 hp
Number of revolutions1430 rpm
Chamber capacity980 mL980 mL
Grinding stages11
Chamber materialplasticplastic
Auto-reverse
Overload protection
Dimensions (HxD)318x173 mm318x173 mm
Weight7.2 kg7.1 kg
Manufacturer's warranty1 year
Added to E-Catalogmay 2020february 2014

Power

This refers to the electric motor power of the waste disposal unit, which determines its efficiency and ability to handle large volumes of waste and solid particles. Higher power means faster processing, but it also leads to increased energy consumption and cost. Therefore, it is important to consider specific usage conditions when selecting a grinder based on its power. So, for small volumes and relatively soft waste, engines up to 0.5 hp are enough, and for more serious tasks, more powerful units are already desirable.

The power consumption and the power of the motor are related, and the formula to convert between them is 1 hp = 735 W. The power ratio is important in determining the energy efficiency of the waste disposal unit, and a larger difference between these values indicates lower efficiency and greater energy waste. However, some manufacturers may provide the peak power of the engine instead of the nominal power, which is not a reliable indicator of efficiency since the waste disposal unit can only operate in this mode for a short period. It is important to consider these factors when choosing a device based on power consumption and efficiency.

Number of revolutions

The motor shaft's nominal speed is a crucial factor in the operation of the waste disposal unit, as it determines the speed of processing. Models with higher nominal speeds can process waste faster than those with lower speeds, provided that their power and other features are equal. However, high speed can also lead to increased noise levels and a reduced ability to handle solid particles.

Overload protection

Protective system is installed in waste disposal units to prevent damage when the load on the tool becomes critical, such as when hard or large waste gets stuck. Typically, the protection system shuts off the power to the motor, allowing the user to address the issue and resume work. However, in more powerful models, the system may boost the motor's power for a brief period as an initial measure. If the problem persists, the unit will shut down to prevent damage.
Teka TR 50.2 often compared