Comparison Asus ROG Raikiri Pro vs Microsoft Xbox Elite Wireless Controller Series 2

The way to connect the manipulator to the gaming device.

In general, such methods are divided into wired(in a conventional or serial format), wireless(radio, Bluetooth, or even both at once) or combined(a combination of wired and wireless formats in one model). Here is a more detailed description of the different options:

— Wired. The classic wired connection is a very popular option, especially among PC/Mac controllers and desktop consoles (see "Platform Compatibility"). But for portable gadgets, it is practically not used (and for AppleTV it is not used in principle). A wired connection is usually carried out via a USB connector, but other options are possible (again, depending on the supported platforms). The main disadvantage of controllers of this format is the limited freedom of movement; this is especially true when playing on a large screen, when you need a considerable distance from such a screen for comfortable viewing. On the other hand, wired accessories are noticeably lighter and cheaper than wireless ones, and the vast majority of such models receive energy from a USB port or a network (see "Power"), so the operating time is unlimited (although there are some exceptions). And the length of the cable is not so often critical: for example, a steering wheel or joystick mounted on a table right in front of the computer usually does not need a lon...g cable, and accessories for desktop consoles usually make the cable quite long.

— Wired serial. A variation of the wired connection described above, in which the controllers are connected in a “chain” through one port: one manipulator is connected to the gaming device, and the second to the first manipulator. In general, this is a rather rare option, used only in some paired sets of gamepads (see "Device type"). However, in some cases, such a connection turns out to be more convenient than the traditional one: it allows you to reduce the number of wires stretching to the set-top box.

— Wireless. The main advantage of all types of wireless connection is obvious: the absence of a cable, which limits mobility and can create inconvenience. And for motion controllers (see "Device type"), this option is, in fact, the only possible one at all (otherwise it would be at least problematic to use such a manipulator). In addition, it is wireless communication (for a number of reasons) that is most convenient for working with portable gadgets — smartphones and tablets. At the same time, the range of such a connection is usually sufficient to work at least within a large living room, and more often at greater distances. On the other hand, wireless controllers are noticeably more expensive than their wired counterparts. In addition, most of them use autonomous power (batteries or accumulator), which limits the time of continuous operation. And although this time can be quite significant, and batteries (and some batteries) can be quickly changed, you still cannot do without interruptions in work, and the charge may end at the most inopportune moment. The exception is some models with mains power, but they have a wire, in turn, “binds” the device to the outlet. As for specific methods of wireless communication, nowadays there are such options:

• bluetooth. Connecting via Bluetooth is convenient primarily because many modern gaming devices initially have built-in modules for such a connection. The list of such devices includes, in particular, almost all desktop consoles, smartphones, tablets and laptops, as well as many advanced PCs (including all Mac computers). Thus, the controller can be made compatible with numerous different devices, and most often no additional adapters are needed for the connection itself. However, if necessary — for example, for a desktop computer without Bluetooth — such an adapter can be purchased separately. With all this, the connection is carried out in the radio range and does not require direct visibility, and its range in open space is standardly at least 10 m (and often much more).
• Radio. Non-Bluetooth radio connection (see above). The specific features of such a connection largely depend on compatibility with gaming platforms (see above). For example, native radio standards are used by many desktop consoles, and connections to such devices are often made directly, without additional equipment. In turn, controllers with the ability to work on a PC (Mac) are equipped with special adapters, usually connected via USB (in this case, such models can also support a direct connection to the game console). But for mobile gadgets, this method of communication is not used — in this case, the Bluetooth described above is more justified.
• Bluetooth / radio. Ability to work in any of the options described above. All such controllers are made immediately for several platforms — consoles (of a particular series), mobile devices and computers; the specific combination of these options can be any, but there is always more than one. However such versatility significantly affects the cost, so in general there are very few models with such a connection. However, if we take not variety, but the total number, then this method is not as rare as one might think — for example, it is provided in the “native” gamepad for Xbox Series S / X consoles of the 2020 model.

— Combined. The combination of a wired connection with support for wireless standards — Bluetooth, radio, sometimes both at once. The features of each of these options are detailed above. And the combined format of work theoretically provides maximum versatility, allowing you to choose the best connection method for different situations. However, in fact, the specifics of the work of such accessories may be different — depending on the compatible platforms and even the features of individual models. For example, some combination controllers use different connection methods for different devices — for example, wired for a PC and radio for a desktop console. Others work mostly wireless, with the cable used to recharge the battery while playing (or when you need to save battery for later). Still others may combine these formats, etc. Anyway, such nuances should be clarified separately. The same goes for general connection features: for example, the "wired / radio" option in a device for PC and consoles can mean both the presence of a wireless USB adapter and the inability to wirelessly connect to computers.

The length of the cable provided in the design or delivery set of the wired or combined controller (see "Connection").

In general, the meaning of this parameter is obvious: a longer cable gives more freedom of movement, but can create inconvenience at short distances. In fact, the length of the wire is important mainly in cases where a wired connection is used to play on a large screen: for comfortable viewing, it is desirable to be at a fairly large distance from such a screen. However, even in this case, a relatively short cable can be compensated for by the length of the wires going from the console (or other gaming device) to the screen, or even by connecting the set-top box to the screen wirelessly (many modern models have this capability). If the controller is used for a computer, this parameter can be ignored: the system unit or laptop is usually located in close proximity to the user, and even a fairly short wire is enough to connect.

The total number of buttons provided in the design of the manipulator.

The more buttons — the more additional features you can "tie" to the manipulator, the lower the likelihood that during the game you will have to turn to other controls (for example, a PC keyboard). However, many game consoles (see "Platform Compatibility") provide a certain minimum number of buttons for a compatible gamepad — a smaller number simply would not allow full use of all the functions of the console. For example, the original PlayStation 4 controller has 11 buttons.

Note that the D-Pad (see below) is not included in this calculation: it is considered a specific control, although it is based on buttons.

The presence of the D-Pad manipulator in the controller design; the type of such a manipulator can also be specified here.

D-Pad is used to move the character, cursor, etc. in strictly defined, standard directions. In some cases, this can be more convenient than using analogue levers that tilt to either side (see below). As for the varieties, nowadays there are such options:

— 4-position. The classic D-Pad, which appeared at the dawn of game consoles and does not lose popularity nowadays. Available as a set of 4 buttons in a distinctive cross-shaped layout, or as a single solid "multi-sided" button. Anyway, such a device provides 4 fixed directions: up, down, right, left. But to move diagonally, you need to select 2 corresponding directions at once; this is not always convenient, so in this regard, 4-way D-Pads are considered somewhat less practical than the 8-way ones described below. On the other hand, they are also quite functional, while being simpler in design, reliable and inexpensive; and strictly diagonal movements are not required as often as horizontal and vertical ones. So this type of D-Pads can be found even in accessories for the latest generations of game consoles.

— 8-position. A variation of the D-Pad, in which 4 standard directions (2 horizontal, 2 vertical) are supplemented by 4 intermediate — diagonal. In this case, we are usually talking about full-fledge...d fixed positions of the manipulator; in other words, to move diagonally, you need to click not on two standard directions, but on one intermediate one. The classic design of this type of D-Pad is a multi-sided button, which is the most suitable option in this case. However, this variety also includes some solutions for 4 separate buttons — provided that these buttons are placed very close, and pressing two at once with one finger is not difficult. Anyway, 8-position manipulators are somewhat more expensive, but more convenient than 4-position ones.

The number and location of analogue sticks provided in the design of the manipulator.

The analogue lever can be described as a "miniature joystick" — it is a protruding lever that can be deflected in any direction. Its purpose is generally similar to the D-Pad (see above), but the stick does not have fixed positions; this provides more "fine" control, which is very important in modern games. In addition, tilting it is often more convenient than pressing the D-Pad.

Separately, it is worth mentioning sticks on Hall sensors. The design of such levers is more reliable due to the absence of rubbing and contacting parts, and the position of the stick is determined by changes in the fluctuations of the magnetic field, which are monitored by appropriate sensors. Sticks on Hall sensors do not have “dead zones”, are devoid of the drift effect (misalignment), and wear out an order of magnitude slower. However, such solutions are not cheap.

This feature is most widely used in gamepads (see "Device type") — most of these controllers have at least one lever, models without sticks are already considered rare. In addition, such equipment, by definition, is installed in all arcade controllers; and analogue levers are also found in virtual reality weapons and motion controllers — it is very convenient to control the movement of the character through them.
...r> As for the location, it is indicated mainly for traditional design gamepads with a full set of controls, including 2 sticks. The most common options here are the left lever on top, the right one on the bottom ( like Xbox) or both levers on the bottom (like PlayStation). Much less common are devices where both analogue sticks are installed on top — this is, in particular, a regular gamepad for Wii U, as well as many models for mobile gadgets. And in some manipulators, a customizable (adjustable) arrangement of levers is provided: usually, the right stick in such models is fixed, and the left one can be installed from above or below, changing the format of the gamepad to suit your preferences.

A small screen that can display various information for the player, notifications about the battery status, network connections, etc. The specific functionality of the display depends on its implementation on board the game controller. So, in steering wheels the screen often shows the speed and/or lap time, in advanced gamepads - the player’s health level, the amount of ammunition, etc. In any case, the display allows you to get useful information without being distracted from the gameplay.

The time of continuous operation of the controller with autonomous power supply (see above) without recharging or replacing batteries. When choosing according to this indicator, note that it is quite approximate, because. in fact, the operating time depends on the intensity of the game, the frequency of feedback, etc., and in models powered by replaceable batteries, it also depends on the quality of these batteries. Therefore, the actual battery life may be less, and sometimes more than the claimed one. Nevertheless, different models of controllers can be quite compared according to the time of operation on a charge given in the characteristics.

The backlight gives the manipulator an unusual and stylish appearance, thereby emphasizing that the device belongs to the segment of gaming devices. Its simplest varieties are monophonic options. In this case, specific colors are different: red, turquoise, green, etc. The most advanced options are multi-color and RGB lighting. Multi-color systems are called systems in which more than three color options are provided, sometimes with intermediate shades. And RGB-backlighting allows you to choose almost any shade at the request and mood of the user.

The ability to customize individual elements of the controller.

Customization is a physical change in the design — primarily to customize individual elements to the personal preferences of the player. This feature is most often found in gamepads. One of its characteristic examples is the ability to swap the D-Pad and the left analogue stick (see above for both); this replacement is especially useful in light of the fact that different gamepads use different layouts, and the regular arrangement of these elements may be unusual (or inappropriate for a particular style of play). In addition, customization often provides the ability to change individual controls — for example, install a different “hat” on the analogue stick, or even replace the 8-way D-Pad with a simpler 4-way one. Such spare parts may initially be supplied as a kit. Thus, the possibility of customization anyway provides additional options for customizing the controller for a specific player. On the other hand, this feature significantly affects the cost; therefore (as well as for a number of other reasons) it is found mainly among advanced models.

Separately, we note that this function should not be confused with remapping — reconfiguring the functions of individual buttons and other elements: remapping is carried out programmatically and its capabilities depend mainly on game settings and special software.