USA
Catalog   /   Computing   /   Components   /   Graphics Cards

Comparison Asus GeForce RTX 4060 Dual OC vs MSI GeForce RTX 4060 VENTUS 2X BLACK 8G

Add to comparison
Asus GeForce RTX 4060 Dual OC
MSI GeForce RTX 4060 VENTUS 2X BLACK 8G
Asus GeForce RTX 4060 Dual OCMSI GeForce RTX 4060 VENTUS 2X BLACK 8G
Compare prices 4Compare prices 2
TOP sellers
Interface
PCI-E v4.0 /x8/
PCI-E v4.0 /x8/
GPU
GPU modelNVIDIA GeForce RTX 4060NVIDIA GeForce RTX 4060
ArchitectureAda LovelaceAda Lovelace
Memory size8 GB8 GB
Memory typeGDDR6GDDR6
Memory bus128 bit128 bit
GPU clock speed2535 MHz2475 MHz
Memory clock17000 MHz17000 MHz
Lithography5 nm5 nm
Max. resolution7680x4320 px7680x4320 px
Passmark G3D Mark18158 score(s)18158 score(s)
Connections
HDMI11
HDMI versionv.2.1av.2.1a
DisplayPort33
DisplayPort versionv.1.4av.1.4a
Software
DirectX12 Ultimate12 Ultimate
OpenGL4.64.6
VR
Stream processors30723072
General
Monitors connection44
Coolingactive (fan)active (fan)
Fans22
Power consumption115 W
Additional power8 pin8 pin
Minimum PSU recommendation550 W550 W
Number of slots2.52
Length
227 mm /227x123x50/
199 mm /199x120x41/
Added to E-Catalogjuly 2023july 2023

GPU clock speed

The frequency of the graphics processor of the graphics card. As a general rule, the higher the frequency of the GPU, the higher the performance of the graphics card, but this parameter is not the only one — a lot also depends on the design features of the graphics card, in particular, the type and amount of video memory (see the relevant glossary items). As a result, it is not unusual for a model with a lower processor frequency to be more performant of two video cards. In addition, it should be noted that high-frequency processors also have high heat dissipation, which requires the use of powerful cooling systems.

Power consumption

Maximum power consumed by the graphics card during operation. This parameter is important for calculating the total power consumed by the entire system and selecting a power supply that provides the appropriate power.

Number of slots

The number of slots occupied by the graphics card on the back of the system unit.

This indicator allows you to estimate the amount of space required to install a video adapter. It is relevant in the light of the fact that modern video cards can have a fairly extensive set of connectors, and for this set there has long been little standard lanyard for 1 slot. This is especially true for powerful performant models. Thus, many solutions, especially mid-range and top-end ones, occupy two or even three slots at once.

Separately, it is worth touching on models for which the characteristics indicate a fractional number of slots — usually 2.5 or 2.7. This detail is provided by the manufacturer for promotional purposes — as confirmation that the graphics card is smaller than a full-fledged 3-slot solution. However, in fact there is no difference between these options: adapters for 2.5 or 2.7 slots still block the third slot (albeit partially), making it unusable.

Length

The total length of the graphics card.

In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.

Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of 150 – 200 mm or less ; an indicator of 200 – 250 mm can still be considered relatively small, 250 – 290 mm — medium, and many models (mostly advanced) have a length of more than 290 mm.
Asus GeForce RTX 4060 Dual OC often compared
MSI GeForce RTX 4060 VENTUS 2X BLACK 8G often compared