USA
Catalog   /   Computing   /   Components   /   Graphics Cards

Comparison ZOTAC GeForce RTX 3070 Twin Edge OC LHR vs ZOTAC GeForce RTX 3070 AMP Holo LHR

Add to comparison
ZOTAC GeForce RTX 3070 Twin Edge OC LHR
ZOTAC GeForce RTX 3070 AMP Holo LHR
ZOTAC GeForce RTX 3070 Twin Edge OC LHRZOTAC GeForce RTX 3070 AMP Holo LHR
Compare prices 4Compare prices 1
TOP sellers
InterfacePCI-E v4.0PCI-E v4.0
LHR (low hash rate)
GPU
GPU modelNVIDIA GeForce RTX 3070NVIDIA GeForce RTX 3070
ArchitectureAmpereAmpere
Memory size8 GB8 GB
Memory typeGDDR6GDDR6
Memory bus256 bit256 bit
GPU clock speed1755 MHz1785 MHz
Memory clock14000 MHz14000 MHz
Lithography8 nm8 nm
Max. resolution7680x4320 px7680x4320 px
Passmark G3D Mark21358 score(s)21358 score(s)
Connections
HDMI11
HDMI versionv.2.1v.2.1
DisplayPort33
DisplayPort versionv.1.4av.1.4a
Software
DirectX12 Ultimate12 Ultimate
OpenGL4.64.6
VR
Stream processors58885888
General
Monitors connection44
Coolingactive (fan)active (fan)
Fans22
Power consumption220 W240 W
Additional power8 + 8 pin8 + 8 pin
Minimum PSU recommendation650 W650 W
Number of slots22.5
Length
232 mm /232x141x41.5/
291 mm /291x142x59/
Added to E-Catalogseptember 2021september 2021

GPU clock speed

The frequency of the graphics processor of the graphics card. As a general rule, the higher the frequency of the GPU, the higher the performance of the graphics card, but this parameter is not the only one — a lot also depends on the design features of the graphics card, in particular, the type and amount of video memory (see the relevant glossary items). As a result, it is not unusual for a model with a lower processor frequency to be more performant of two video cards. In addition, it should be noted that high-frequency processors also have high heat dissipation, which requires the use of powerful cooling systems.

Power consumption

Maximum power consumed by the graphics card during operation. This parameter is important for calculating the total power consumed by the entire system and selecting a power supply that provides the appropriate power.

Number of slots

The number of slots occupied by the graphics card on the back of the system unit.

This indicator allows you to estimate the amount of space required to install a video adapter. It is relevant in the light of the fact that modern video cards can have a fairly extensive set of connectors, and for this set there has long been little standard lanyard for 1 slot. This is especially true for powerful performant models. Thus, many solutions, especially mid-range and top-end ones, occupy two or even three slots at once.

Separately, it is worth touching on models for which the characteristics indicate a fractional number of slots — usually 2.5 or 2.7. This detail is provided by the manufacturer for promotional purposes — as confirmation that the graphics card is smaller than a full-fledged 3-slot solution. However, in fact there is no difference between these options: adapters for 2.5 or 2.7 slots still block the third slot (albeit partially), making it unusable.

Length

The total length of the graphics card.

In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.

Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of 150 – 200 mm or less ; an indicator of 200 – 250 mm can still be considered relatively small, 250 – 290 mm — medium, and many models (mostly advanced) have a length of more than 290 mm.
ZOTAC GeForce RTX 3070 Twin Edge OC LHR often compared