Comparison Pantum M6500 vs Canon i-SENSYS MF3010

The maximum resolution of the image to be printed. It is usually indicated by two numbers indicating the number of dots per inch (dpi) horizontally and vertically, for example 1200x600. The detail of the image depends on this parameter – the higher the resolution, the more fine details the printer is able to convey and the better their image will be. High print resolution is important, foremost, operating with graphic material; low resolution is sufficient for high-quality text display. So there are the following options: 600x600, 1200x600, 1200x1200, 1800x600, 2400x600, 2400x1200, 2400x2400, 4800x600, 4800x1200, 4800x2400, 5760, and higher print resolutions.

Black and white copy speed – the number of copies of one page that the MFP can produce in 1 minute. Typically indicated for poor print quality. This option is important if you often need to make many copies of a single document.

The number of pages the printer can produce per minute in black and white mode. Typically indicated for low print quality, higher print quality takes longer. This setting is important if you need to frequently print text documents.

The maximum number of pages that the MFP can print in a month while remaining fully operational.

Types of cartridges (both black&white and colour) used in the MFP. Some models of the MFP are able to work with third-party cartridges, but this feature usually refers to undocumented, and the manufacturer's warranty applies only to specific types of cartridges. So, use third-party compatible cartridge models with caution.

The amount of built-in memory provided in the MFP.

This parameter determines not only the amount of information that can be simultaneously stored in the device, but also the specifics of memory usage. With relatively small volumes of the built-in storage (up to 400 – 500 MB), it is mainly used to store print tasks and scan results — until the tasks are completed and digital copies of documents are transferred to their destination. Among high-end MFPs, there are modules, which volume is already calculated in gigabytes. Usually, the presence of this amount of internal memory means that the device has an extensive set of built-in tools, including the ability to use it as a temporary storage for document files.

The clock speed of the processor installed in the MFP. Theoretically, the higher this indicator, the faster the device is able to handle with various tasks; high performance is especially important when printing high quality images, scanning at high resolutions, etc. However, in fact, the capabilities of the MFP, in addition to the processor, depend on a number of other specs, and this point is more for reference than practically significant, and when choosing, it is worth focus on more obvious performance specs (copy speed, print speed, etc.).

The maximum resolution of the MFP scanner. It is usually indicated by two numbers indicating the number of dots per inch (dpi) horizontally and vertically, for example 1200x2400. The higher the resolution, the more dots the scanned image consists of and the smoother the lines on the digitalized copy and the better the fine details it displays. There are the following common resolutions: 600x600, 600x1200, 600x2400, 1200x1200, 1200x2400, 2400x4800, 4800x4800 and even more.

The maximum noise level coming from the MFP during operation. The smaller this value, the more comfortable the use of the device. For office use, this parameter is not so important, but you should pay attention to it if you are going to use the device at home. It is easiest to evaluate a specific noise level using special comparative tables. For example, the quietest modern MFPs can operate with 34-35 dB noise level which is approximately corresponds to a muffled conversation, and the heaviest and most performant models give out up to 75 dB — this is comparable to a scream or a loud laugh at a distance of 1 m.