Zalman i3 black
Zalman i3 black Chassis Form Factor:Midi Tower Motherboard size:ATX PSU power:no PSU Internal bays 3.5":2 Internal bays 2.5":3 Front panel:USB 3.1 gen1, USB 2.0 A medium-sized mid-range tower that features a spacious chassis with good airflow, as well as spectacular LED lighting. The right sidewall is a solid sheet of transparent acrylic. The power supply is located in the lower compartment. Chassis dimensions are designed to install a motherboard with a typical ATX size. In the system unit itself, you can use performant hardware resources. So, on the chassis there is a place for installing processor cooling up to 156 mm high, and as discrete graphics, you can use a board up to 360 mm long. Heat dissipation is represented by an air cooling system. The Zalman i3 case is standardly equipped with 4 fans with a diameter of 120 mm: 3 coolers are mounted on the front panel, another 1 impeller is installed at the back. There are several more seats on the top cover, but additional coolers will have to be ordered separately. Perforations are provided on the front panel to improve air convection. The button block has a special switch with which you can control the speed of rotation of the impellers, and at the same time the level of noise they create. This case has a Zalman i3 Edge modification, in which the front part is additionally protected by an acrylic panel. All specifications AccessoriesAll accessories for Zalman i3 → Video reviews We recommend→ Compare using chart | Filters Models |