USA

MikroTik LHG XL 2 (RBLHG-2nD-XL)

Photos - Wi-Fi MikroTik LHG XL 2
Photos 8
Expecting restock
$93.10 
Directional Wi-Fi access point with a mesh antenna designed to operate in the 2.4 GHz band (Wi-Fi 4, 802.11b/g/n). The dual polarization antenna provides the same gain in horizontal and vertical polarization. Behind the mesh is a honeycomb support structure made of a special plastic designed to provide overall rigidity to the reflector. The emitter itself is located at the top of the antenna and has 3 attachment points to the reflector, which provides additional rigidity to the entire structure. The MikroTik LHG XL 2 directional access point is ideal for creating wireless bridges (point-to-point connections) and for use as Customer Premises Equipment over long distances. Supports Nv2 TDMA protocol. The mesh design provides wind protection, and the fact that the antenna element is built int...o the wireless unit means there is no cable loss. The device is delivered disassembled, but it is easy to assemble. The kit includes a simple, secure mount and a small adapter to tilt the antenna 5° from its original position. To obtain a high data transfer rate, the distance between access points should not exceed 17 km. The maximum speed of 100 Mbps is achieved at a distance of less than 15 km. This model is designed for outdoor installation and is designed for operation in a wide temperature range (from -40 °C to +70 °C).
add to listmy lists
MikroTik LHG XL 2
WAN:Ethernet
Connection:LAN 1 port, 100 Mbps
Wi-Fi:Wi-Fi 4 (N)
2.4 GHz:300 Mbps
Antennas and signal:25 dBm, 1 antenna(s), non-removable

Directional Wi-Fi access point with a mesh antenna designed to operate in the 2.4 GHz band (Wi-Fi 4, 802.11b/g/n). The dual polarization antenna provides the same gain in horizontal and vertical polarization. Behind the mesh is a honeycomb support structure made of a special plastic designed to provide overall rigidity to the reflector. The emitter itself is located at the top of the antenna and has 3 attachment points to the reflector, which provides additional rigidity to the entire structure.

The MikroTik LHG XL 2 directional access point is ideal for creating wireless bridges (point-to-point connections) and for use as Customer Premises Equipment over long distances. Supports Nv2 TDMA protocol. The mesh design provides wind protection, and the fact that the antenna element is built into the wireless unit means there is no cable loss. The device is delivered disassembled, but it is easy to assemble.

The kit includes a simple, secure mount and a small adapter to tilt the antenna 5° from its original position. To obtain a high data transfer rate, the distance between access points should not exceed 17 km. The maximum speed of 100 Mbps is achieved at a distance of less than 15 km. This model is designed for outdoor installation and is designed for operation in a wide temperature range (from -40 °C to +70 °C).

All specifications
Specifications LHG XL 2
Colour
Product typedirectional access point
Data input (WAN-port)Ethernet (RJ45)
Wi-Fi
Wireless Wi-Fi connection
Wi-Fi standardsWi-Fi 3 (802.11g)
Wi-Fi 4 (802.11n)
Frequency band2.4GHz
Wireless speed 2.4 GHz300 Mbps
Connection and LAN
LAN1 port
100 Mbps
Antenna and transmitter
Number of antennas1
Antenna typeexternal
2.4 GHz antennas1
HPBW / hor.18 °
HPBW / vert.18 °
Transmitter power25 dBm
Signal strength 2.4 GHz25 dBm
Functions
Featuresbridge mode
Security
Safety standardsWPA
WEP
WPA2
General
PoE (input)passive
Outdoor mount
Operating temperature-40 °C ~ +70 °C
Dimensions550x550x245 mm
Weight945 g
Added to E-Catalogjuly 2019
P/N
RBLHG-2nD-XL

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog MikroTik 2024 - new products, best sales and most actual models MikroTik.
Filters