USA

MikroTik LDF 2 (RBLDF-2nD)

Photos - Wi-Fi MikroTik LDF 2
Photos 8
Outdated Product
$55.00 
Simple and affordable wireless outdoor access point with Wi-Fi 4 (802.11n) support and Power-Over-Ethernet technology. It is equipped with a built-in directional antenna and is intended for mounting an offset dish on the reflector, which focuses and amplifies the signal (the reflector dish is not included in the kit and must be purchased separately). It is positioned as an entry-level product that can be used for point-to-point bridging or as a client device for multipoint applications. When using a reflector with a diameter of 1 m, an amplification of up to 30 dBi is achieved. Thanks to the powerful transceiver, this is enough to transmit data at a distance of up to 35 km. Wireless access point MikroTik LDF 2 is designed for mounting on a universal 40 mm mount in open areas. It is reliabl...y protected from rain/snow/fog and condensation, capable of operating at temperatures from -40 to +70 °C. Supports MIMO 2x2 multi-stream data transfer technology, which allows the manufacturer to declare an impressively high peak data transfer rate (up to 300 Mbps). For incoming and outgoing connections, use a universal WAN / LAN port with a bandwidth of 100 Mbps.
add to listmy lists
MikroTik LDF 2
WAN:Ethernet
Connection:LAN 1 port, 100 Mbps
Wi-Fi:Wi-Fi 4 (N)
2.4 GHz:300 Mbps
Antennas and signal:28 dBm, 1 antenna(s), non-removable
The wireless bridge can be mounted on any satellite dish using a 40 mm universal mount. Check if the antenna is included.

Simple and affordable wireless outdoor access point with Wi-Fi 4 (802.11n) support and Power-Over-Ethernet technology. It is equipped with a built-in directional antenna and is intended for mounting an offset dish on the reflector, which focuses and amplifies the signal (the reflector dish is not included in the kit and must be purchased separately). It is positioned as an entry-level product that can be used for point-to-point bridging or as a client device for multipoint applications.

When using a reflector with a diameter of 1 m, an amplification of up to 30 dBi is achieved. Thanks to the powerful transceiver, this is enough to transmit data at a distance of up to 35 km. Wireless access point MikroTik LDF 2 is designed for mounting on a universal 40 mm mount in open areas. It is reliably protected from rain/snow/fog and condensation, capable of operating at temperatures from -40 to +70 °C. Supports MIMO 2x2 multi-stream data transfer technology, which allows the manufacturer to declare an impressively high peak data transfer rate (up to 300 Mbps). For incoming and outgoing connections, use a universal WAN / LAN port with a bandwidth of 100 Mbps.

All specifications
Specifications LDF 2
Colour
Product typedirectional access point
Data input (WAN-port)Ethernet (RJ45)
Wi-Fi
Wireless Wi-Fi connection
Wi-Fi standardsWi-Fi 3 (802.11g)
Wi-Fi 4 (802.11n)
Frequency band2.4GHz
Wireless speed 2.4 GHz300 Mbps
Connection and LAN
LAN1 port
100 Mbps
Antenna and transmitter
Number of antennas1
Antenna typeexternal / parabolic /
2.4 GHz antennas1
HPBW / hor.60 °
HPBW / vert.60 °
Transmitter power28 dBm
Signal strength 2.4 GHz28 dBm
Security
Safety standardsWPA
WEP
WPA2
General
PoE (input)passive
Power consumption7 W
Outdoor mount
Operating temperature-40 °C ~ +70 °C
Dimensions84x84x115 mm
Added to E-Catalogjune 2019
P/N
RBLDF-2nD

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog MikroTik 2024 - new products, best sales and most actual models MikroTik.
Filters