Xiaomi Fimi A3
Photos 18 | Outdated Product Flight time (min): 25; Speed (km/h): 65; Ascent / descent speed (km/h): 21.6; Wind impedance (m/s): 8; Camera type: removable; Megapixels: 8; Photo resolution (px): 3264x2448; Viewing angles: 80°; Camera stabilization; Mechanical stabilizer; Live video streaming; Follow me (tracking); Dronie (distance) |
Xiaomi Fimi A3
Flight:up to 25 min, speed 65 km/h
Filming a video:1280x720 px, 1920x1080 px 30 fps
Camera:removable, gimbal for stabilization, camera stabilization
Dimensions:285x229x69 mm
Weight:560 g
Live video broadcast up to 1 kilometer. Processor-based 3rd generation flight controller. The camera has an Ambarella ISP processor. 3 flight modes and 6 smart modes. There is a DIY port (for connecting an additional payload)
The remote control is charged via micro USB. Camera stabilization: 2-axis mechanical and 3-axis electronic stabilization (EIS)
All specifications
Specifications Fimi A3
|
|
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Xiaomi 2024 - new products, best sales and most actual models Xiaomi.
Before buying always check characteristics and configuration of product with online store manager
Catalog Xiaomi 2024 - new products, best sales and most actual models Xiaomi.
Camera Features:
- Sensor: 1/3.2″ Sony CMOS
- Aperture: f/2.0
- Camera light sensitivity (ISO): 100-3200 (video), 100-1600 (photo)
- Shutter speed: 4 — 1/8000s
- FHD — 1920x1080p (30/25 fps)
- GPS (default) — provides maximum stabilization and positioning. Offline flight modes available. Maximum horizontal flight speed — 36 km/h; maximum takeoff and landing speed — 10 km/h.
- SPORT — allows you to unleash the potential of the drone. The GPS module is used to achieve an accurate position hold. Offline flight modes available. Maximum horizontal flight speed — 64 km/h; maximum takeoff speed — 21 km/h; maximum landing speed — 18 km/h.
- ATTI — activated if there is no GPS connection or because the compass does not work correctly. In this mode, the aircraft will not hold position and will drift in a horizontal direction. Offline modes are not available. Flying in ATTI mode is recommended in an open area away from people and animals within a line of sight of the drone.
- Follow me (Following) — the quadric follows the control equipment, keeping the owner in the centre of the frame. Available in GPS and SPORT modes. It is active if the control equipment and the quadcopter find 6 or more satellites for communication. The user can set the desired altitude and distance between the aircraft and the remote control for the follow mode.
- Orbit mode (Around-point) — allows you to implement a circular flight around the selected point. The user can change the flight radius, altitude and flight speed with the sticks on the equipment.
- Fixed-wing — when activated, the drone can only fly straight and at a constant speed. The user can control the speed and route of the drone through the joysticks on the remote control.
- Droni (Self-timer) — before activation, the user sets the position of the quadcopter, so that the object for shooting is in the centre of the frame. Then the camera angle is set. After activating the mode, the quadcopter will autonomously move away from the object in an ascending straight line at a distance of 150 metres and a height of 120 metres. Upon reaching the peak, the drone will automatically return to its original position.
- Return to Home (RTH) — activated automatically when the connection is lost, the drone's battery voltage is insufficient and forced at the request of the pilot. Provides autonomous return of the quadric to the takeoff point with subsequent landing.
- Headless — Disables the drone's Fore/Aft orientation, allowing the novice to quickly adapt to the control of the quadcopter, and the advanced pilot to focus on filming.