Vinga CS213B black
 | Outdated Product Relatively inexpensive case with great gaming potential. The MidiTower platform will easily accommodate any of the motherboards: ATX, Mini-ITX, microATX. Thanks to its good capacity, the case can easily fit discrete graphics up to 315 mm long, as well as a processor cooling tower up to 154 mm high. Although the Vinga CS213B case is not equipped with standard fans, it has mounts for 6 120 mm bladed impellers inside: you can put either 3 120 mm coolers or 2 140 mm impellers in the front. Perforations with dust protection are provided at the front, top and bottom. At the base of the platform there is a compartment covered with a casing, where both an ATX-compatible power supply and a hard drive rack fit. In total, the case has space for 3 3.5″ HDD devices and 3 solid-state SSD drives. The fro...nt panel has an embossed protrusion that gives the case a more aggressive gaming character. The right side is made from a single sheet of lightly tinted acrylic. Convenient cable management is provided for neat wiring. The legs of the case are rubberized, which eliminates the vibration load on the countertop. |
 |
Relatively inexpensive case with great gaming potential. The MidiTower platform will easily accommodate any of the motherboards: ATX, Mini-ITX, microATX. Thanks to its good capacity, the case can easily fit discrete graphics up to 315 mm long, as well as a processor cooling tower up to 154 mm high. Although the Vinga CS213B case is not equipped with standard fans, it has mounts for 6 120 mm bladed impellers inside: you can put either 3 120 mm coolers or 2 140 mm impellers in the front.
Perforations with dust protection are provided at the front, top and bottom. At the base of the platform there is a compartment covered with a casing, where both an ATX-compatible power supply and a hard drive rack fit. In total, the case has space for 3 3.5″ HDD devices and 3 solid-state SSD drives. The front panel has an embossed protrusion that gives the case a more aggressive gaming character. The right side is made from a single sheet of lightly tinted acrylic. Convenient cable management is provided for neat wiring. The legs of the case are rubberized, which eliminates the vibration load on the countertop.
